Argos Santos Recliner Chair And Foot stool User manual

Components
Simple Assembly Instructions - Please keep for future refence
Santos Recliner Chair And Foot stool
Fittings
IMPORT ANT
4 x Screw
M6x18MM
4 x Screw
M8x45MM
A4xWasher
M8x22MM
B
4 x Washer
M6x18MM
C
1x Spanner
M6
E
1x Wood base
C
2x Wood brace
B
1x Foot stool
A
D1x Chair
D
L R
1.Read these instruction carefully and
familiarise yourself with the procedure
before assembling the unit.
2.Check that you have all the component
parts following the list on the back
cover and familiarise yourself with
each part before proceeding.
3.Take all the fittings out of the plastic
bag and separate them into their groups.
4.Ensure you have enough space to lay
out all the parts before assembly.
5.To avoid scratching it is recommended
that you assemble the unit on a soft
level surface.
6893273
6893259
6893280

Assembly Instructions Assembly Instructions
Stage 1 - Fitting the brace Stage 2 - Fitting the wood base
fig.3
fig.1
fig.2
3.Fix the wood base Con the
wood brace Bwith screws
washers
AC.
See fig.3.
1.Fix the wood brace R with
screws
B
D
A
C
and washers .
2.Fix the wood brace L with
screws and washers .
A
C
See fig.1.
See fig.2.
E
E
B
A
C
B
BD
BD
B
B
D

Assembly Instructions Assembly Instructions
Stage 3 - Back Rest Adjustment Stage 4 - Finishing the Unit
Care and Maintenance
fig.6
fig.5
fig.4
D
1.Adjust the knob
See fig.4.
This chair features a manual
reclining back rest.You need
to be sitting in the chair to
activate the features.
E
E
in counter
clockwise,then gently lean back
to choose a comfortable angle,then
adjust the knob in clockwise to
lock it.
2. the knob Adjust in clockwise
and lean forward.Then adjust the
knob in clockwise to lock it.
See fig.5.
Safety
Cleaning
Fitting
To avoid any risk of suffocation to animals or children dispose of the plastic
bags immediately.
As with all surfaces clean with a damp cloth and mild detergent ,do not use
bleach or abrasive products.
From time to time please ensure there are no loose screws on the product.
1.Adjust the recliner to your
own requirements.
2.Finally carefully place the
unit in the desired location.
See fig.6.
E
E
E
E