ASCOM OFFICE 155PRO User manual

ascom Office 155pro Quick User’s Guide en
Call key: With this key you connect or disconnect a call.
Menu key: Repeated pressing easily takes you to further functions:
Press the M key several times if necessary in the idle state or during a call.
C key: Repeatedly pressing the C key returns you to the beginning.
Foxkeys: The displayed functions in the lowermost display line can be selected directly with
the Foxkeys.
i in the isplay: Press the Info key one or more times for more information.
+ in the isplay: Press the Info key for the rest of the information.
Call diversion: Incoming calls are to be diverted:
1. Press the M key repeatedly until Diversion appears in the display.
2. Press the Foxkey under Divert .
3. Press the Foxkey under v until Divert to subscriber appears in the display
and then press the Foxkey under OK .
4. Enter a number.
5. Press the Foxkey under OK in the display appears Divert to: .
6. Deactivate diversion: Press the Foxkey under Reset (if Reset not visible in the
display: keep pressing the Info key until Reset appears).
Connecting/
Transferring:
During a call:
1. Press the Foxkey under Enquiry call .
2. Enter the number and wait until the call is answered.
3. Press the Call key and the call is transferred (if nobody picks up, press the C key
to reconnect the first call).
C
M
i
Info key
Fox key
Call key
Menu
Key names:
C key
Loudspeaker key
Sound aperture
Volume key
Hotkey
isplay symbols:
Open listening
Microphone on/off
Handsfree mode
Scroll up
Text mode on keyboard is activated
Vibra call activated
eud_0275_en.fm Page 1 Tuesday, April 29, 2003 3:09 PM

eud-0275_en.fm
Verison 1.0
Brokering: Switching between two callers and simultaneously conducting two calls.
During a call:
1. Press the Foxkey under Enquiry call .
2. Enter the number and wait until the call is answered.
3. Press the Foxkey under Brokering to switch callers.
Hands-free operation: You telephone without putting the handset to your ear.
Warning! o not put the handset to your ear because the volume greatly
increases!
1. Press the Loudspeaker key.
2. End handsfree operation: Press the Loudspeaker key again.
Conference call: You can connect several callers for a conference call.
During a call:
1. Press the Foxkey under Enquiry call .
2. Enter the number and wait until the call is answered.
3. Press the Menu key repeatedly until Conference appears in the display.
4. Press the Foxkey under Conference .
5. Add participants via inquiry.
6. Leaving a conference call: Press the Call key.
Callback: Request callback: The person is busy or does not answer.
1. Press the Foxkey under Callback .
2. Press the call key, the display shows Call expected... .
3. Delete callback, press the Foxkey under Reset .
ialling by name -
Quickdial:
Select from all of the names stored in the telephone system:
With Quickdial you only need to press the digit keys once for each letter,
even though each key is assigned three letters (the system administrator can tell you
whether surname or first name has been entered first):
1. To select a person to call, press the first couple of letter keys once (first name and
surname can be separated using the Hash key).
2. Press the Foxkey under ABC .
3. Press the Foxkey under v as often as necessary to display the desired name.
4. Initiate call: Press the Call key.
SIM Card: The SIM Card stores the registration with the system and the local inputs.
Vibra-call menu: Incoming calls can be signalled by vibration.
Press and hold the Loudspeaker key a moment: The Vibra-call menu opens.
Further functions and settings of the telephone as well as the declaration of conformity are available
in the extensive User’s Guide. It is available from your system administrator or you can access it at:
www.ascom.com/ec/documents
eud_0275_en.fm Page 2 Tuesday, April 29, 2003 3:09 PM