Assa Abloy Yale Assure Lock with Wi-Fi User manual

User Manual of Product 1:
Yale Assure Lock SL, Wi-Fi Smart Lock - Works with the Yale
Access App, Amazon Alexa, Google Assistant, HomeKit,
Phillips Hue and Samsung SmartThings, Satin Nickel
User Manual of Product 2:
Yale Assure Lock SL, Wi-Fi Smart Lock - Works with the Yale
Access App, Amazon Alexa, Google Assistant, HomeKit,
Phillips Hue and Samsung SmartThings, Oil Rubbed Bronze

Getting Started with your
Yale Assure Lock® with Wi-Fi
Download the free Yale Access App
on your smartphone and create an account.
Tip: If you already use the August App,
use the same login details.
1Tap ‘Set up a Device’
from the app menu.
2
Scan the QR code located on the Quick Start Guide, or on your
packaging. If you cannot find your QR code, tap “Can’t scan the
code?” and enter your serial number (begins with M1).
The serial number can be found on your white Smart Module.
Tip: If your Serial Number has an O, it is the letter, not the number 0.
3
Follow the
in-app steps
to install your
Assure Lock.
4Insert
the 4 AA
batteries.
5Create a master entry
code by waking the
keypad and pressing .
Then enter your desired
code. Press to save.
6
Temporarily remove the batteries
and insert the Yale Access Smart Module
into the slot above the
battery compartment.
Re-install the batteries.
7Register your
Smart Module by
entering your master
entry code then .
Press ‘7’ and then .
Press ‘1’ and then .
8
Install DoorSense™
by following the steps
shown in the
Yale Access App.
9Enable HomeKit, if desired, by
following the steps in the Yale Access
App. You will need the HomeKit QR code
which is on your white smart module.
Tip: The HomeKit QR code has a house icon with it.
10
Set up your Connect Wi-Fi Bridge
by scanning its QR code. After scanning,
plug in your Connect.
Tip: Make sure the Connect is plugged into an outlet
within 10 feet from your door lock.
11
Create entry codes by tapping on the bottom menu of the app.
Tap ‘Invite’ and then choose either ‘App Access’
or ‘Personal Entry Code Only.’
For entry code access, codes can be 4-8 digits long
and can be temporary, scheduled or permanent.
12
Part of ASSA ABLOY

Getting Started with your
Yale Assure Lock® with Wi-Fi
Download the free Yale Access App
on your smartphone and create an account.
Tip: If you already use the August App,
use the same login details.
1Tap ‘Set up a Device’
from the app menu.
2
Scan the QR code located on the Quick Start Guide, or on your
packaging. If you cannot find your QR code, tap “Can’t scan the
code?” and enter your serial number (begins with M1).
The serial number can be found on your white Smart Module.
Tip: If your Serial Number has an O, it is the letter, not the number 0.
3
Follow the
in-app steps
to install your
Assure Lock.
4Insert
the 4 AA
batteries.
5Create a master entry
code by waking the
keypad and pressing .
Then enter your desired
code. Press to save.
6
Temporarily remove the batteries
and insert the Yale Access Smart Module
into the slot above the
battery compartment.
Re-install the batteries.
7Register your
Smart Module by
entering your master
entry code then .
Press ‘7’ and then .
Press ‘1’ and then .
8
Install DoorSense™
by following the steps
shown in the
Yale Access App.
9Enable HomeKit, if desired, by
following the steps in the Yale Access
App. You will need the HomeKit QR code
which is on your white smart module.
Tip: The HomeKit QR code has a house icon with it.
10
Set up your Connect Wi-Fi Bridge
by scanning its QR code. After scanning,
plug in your Connect.
Tip: Make sure the Connect is plugged into an outlet
within 10 feet from your door lock.
11
Create entry codes by tapping on the bottom menu of the app.
Tap ‘Invite’ and then choose either ‘App Access’
or ‘Personal Entry Code Only.’
For entry code access, codes can be 4-8 digits long
and can be temporary, scheduled or permanent.
12
Part of ASSA ABLOY