Assa Abloy HES 8000 Series User manual

3
Installation Diagrams
LBM WIRING
White
Orange Normally Open
Green Normally Closed
Common
Diagram 4. Latchbolt MonitorDiagram 3: Fail Safe to Fail Secure
Diagram 5: Faceplate Installation
a
b
c
Screws are loosened, but
not removed
Screws are moved to the Fail Safe
position as shown
Screws are tightened
Diagram 7. Vertical Adjustability
Diagram 6. Vertical Alignment
Fail Safe*
Centerline
*Fire rating only applies to Fail
Secure units. Conversion to Fail
Safe negates fire rating on 8300
White
Orange
Green

1/8" [3]
4
NOTE: The 8000/8300 electric strike with
801faceplate will fit right into most
standard ANSI A115.2, 1” deep
dustboxes (e.g. the Curries E-1
preparation), requiring no cutting.
If you elect to place the 8000/8300
into the existing dustbox, simply
drill for wire connections.
8000/8300 with 801 Faceplate
1-1/4” X 4-7/8” Square Corner Faceplate
ANSI Metal Jamb Installations
4-7/8" [124]
4-1/8" [105]
1-1/4" [32]
3-3/8" [86]
Cutout Templates
®
Diagram 8. Wire Drilling
3/16" [4.8]
3/8" 3/4" [19]
1-1/32” [26.2]
[9.5]
Inches [mm]
Diameter