AT&T Merlin Legend BIS10 User manual

List Most Often Used Codes
List Most Often Used Codes
Name
CodeCode
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Name
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
17.
Posted Messages
1. Do Not Disturb
6.
11.
16.
2. 7.
12. 17.
3.
8.
13. 18.
4.
9. 14. 19.
5.
10. 15.
20.
AT&T CIC# 555-620-121
Issue 1- October 1992
System Speed Dial Account Codes
15.
16.

TELEPHONE
Line Buttons
BIS-34D Display
Telephones with SA Buttons
SA Ring
Use to make/receive
ringing calls and
receive inside voice-
announced calls.
SA Voice
Use to make/receive
outside calls, receive
inside ringing and
voice-announced calls,
and make inside voice-
announced calls.
(Co-workers hear your
voice over the
speakerphone.)
SA Originate Use only to make inside
only
and outside calls.
BIS 34
Shared SA Use to make/answer
calls for co-workers or
join conversations.
Line is shared
with another co-worker.
Button can be either
ring or voice.
555-XXXX Use to make/receive
outside calls only.
Telephones with ICOM Buttons
ICOM Ring
ICOM Voice
ICOM
Originate
only
555-XXXX
Use to make inside
calls and receive
inside ringing and
voice-announced
calls.
Use to make inside
voice-announced and
receive inside ringing
and voice-announced
1 Line 16
Characters
calls.
Use only to make
inside calls.
Use to make/
Line Buttons
configuration
for BIS-22
& BIS-22D
receive outside
calls only.
Desk Stand
See your user card in the
user card tray for instructions
on adjusting the telephone’s
desk stand.
BIS Telephones
1 Line
16 Characters
Line Button
Configuration
for BIS-34
& BIS-34D
Dedicated Feature Buttons
Timekeeping Buttons
(Display phones only) Four buttons used to
control display timekeeping functions.
Dedicated Feature Buttons
Conference
Drop
HFAI
Hold
Message
Microphone
Recall
Press to add another person
to a call.
Press to disconnect a
person from a conference
call.
(Hands Free Answer on
Intercom) Press to answer
voice-announced calls.
Press to put a call on hold.
Press to read your
messages.
Press to turn speakerphone
microphone on and off.
Press to disconnect without
hanging up.
Speakerphone Press to turn speakerphone
on or off.
Transfer
Press to send a call to
another phone.
BIS-10 Buttons
Line
Buttons
&
Button
Labeling
Card
Dedicated
Feature
Buttons
Line Buttons per Telephone
BIS-10 :10
BIS-22 & BIS-22D: 22
BIS-34 & BIS-34D: 34
BIS-22D Display
BIS-22
Dedicated Feature Buttons

OFTEN USED FEATURES
Forward and Follow Me
To program:
1. Label a button.
2.
Slide T/P switch to P.
3.
Press labeled button.
4. Dial ✱ 33.
5.
Slide T/P switch to center.
To forward calls to an extension:
1. Press an ICOM or
SA button.
2.
Press programmed button.
3.
Dial extension.
To forward calls to an outside number:
1.
Press an ICOM or
SA button.
2.
Press programmed button.
3.
Dial dial-out code for ICOM or
SA button.
4.
Dial phone number, then dial #.
To setup follow me from another
extension:
1. Press an ICOM or
SA button.
2.
Press Feature and dial 34.
3.
Dial your extension.
To cancel forward and follow me:
● From your extension:
1. Press Feature.
2. Dial ✱ 33 + your extension.
● From one extension:
1. Press Feature.
2. Dial ✱ 34 + your extension.
● Sent from all extensions:
1. Press Feature.
2. Dial ✱ 34 ✱ .
Copyright © 1992 AT&T
MERLIN LEGEND is a trademark of AT&T

CALL HANDLING
Line Button Lights
Light Meaning
Steady red You are automatically
connected to this line when
you lift the handset.
Steady green The line is in use or the
feature programmed onto
the line button is in use.
Steady red You are using this line
and green button or the Line Request
feature is in use.
Steady red and An incoming call is ringing
flashing green on this line button or a call
you transferred is returning
to this line button.
Fast flashing You have put a call on hold
green on this line button.
Slow flashing Someone else has put a
green
call on hold on this line
button.
Tones
Tone Meaning
Dial tone
You can make a call.
(steady tone)
Busy (slow The phone you are calling
repeating tone) is busy.
Fast busy (fast No lines are available.
repeating tone)
Alternating high You dialed a number
and low tones
incorrectly or misused
a feature.
Confirmation tone You used a feature properly.
(double break
in dial tone
followed by
steady tone)
Callback tone The outside line or the
(five short extension is busy and
beeps) your phone is programmed
for automatic callback.
Call waiting
tone (one or
two beeps while
you are on
another call)
You have an inside call
(one beep) or an out-
side call (two beeps)
waiting.
Rings
Ring
Meaning
One long ring An inside call
One short ring and An outside call
one long ring
Two short rings and An outside call transferred to you,
one long ring
a returning transferred call, or a
returning Callback call
Conference
Conference can have up to
three inside participants,
including yourself, and up to
two outside participants.
1.
2.
3.
4.
5.
6.
7.
●
●
●
Dial the first number or
extension.
Press Conference.
(after first call is answered
which puts call on hold).
Select line button, if not
selected.
Dial next number or
extension.
Announce call and press
Conference.
Repeat Steps 2-5 for
each outside participant.
To end conference,
hang up.
Press Drop and line
button to drop any
participant added.
Press Hold to
temporarily
leave conference.
Press any participant’s
line to rejoin the
conference.
Transfer
To transfer:
1. Press Transfer.
2.
Press ICOM or SA
button, if not already
selected.
3.
Dial extension or number.
4. Announce call, if desired.
5.
Press Transfer, hang up,
or return to call on hold.
To one-touch manual transfer:
1. Press Auto Dial button.
2.
Announce call.
3.
Press Transfer, hang up,
or return to call on hold.
To one-touch auto transfer:
●
Press Auto Dial button.
Ask your system manager if
this feature is available.

OFTEN USED FEATURES
Auto Dial
To program:
1.
2.
3.
4.
5.
6.
7.
Label a button.
Slide T/P switch to P.
Press labeled button.
Dial
✱ 22 for inside
numbers, or ✱ 21 for
outside numbers.
Dial extension or outside
number. Include entire
dialing sequence, for
example, dial-out codes.
(See Special Characters
Table.)
Repeat Steps 3-5 to
program additional buttons.
Slide T/P switch to center.
To use auto dial button for ringing
calls:
●
Press programmed Auto
Dial button.
To use inside auto dial button for
voice-announced calls:
1. Press appropriate ICOM
Voice or SA Voice button.
2.
Press programmed Auto
Dial button.
3.
Begin talking after the
beep.
Personal Speed Dial
Program 2-digit codes with numbers
you dial most often, then use Feature
button to use these codes to dial a
number. (Feature available only on
lo-button telephones.)
To program personal speed
dial codes:
1.
2.
3.
4.
5.
Slide T/P switch to P.
Dial #and 2-digit
code (01-24), then dial ✱ 21.
Dial phone number or
account number. Include
entire dialing sequence, for
example, dial-out codes.
Special characters may be
needed (See Special
Characters Table).
Repeat Steps 2 and 3 to
program additional codes.
Slide T/P switch to center.
To use:
1.
Press Feature.
2.
Dial 2-digit code (01-24).
System Speed Dial
Use company-programmed 3-digit
codes to dial phone numbers. Ask
your system manager for a list of
numbers and their associated
codes.
To program:
1. Label a button.
2.
Slide T/P switch to P.
3.
Press button to be
programmed.
4.
Dial ✱ 24.
5.
Dial 3-digit company-
supplied speed dial code.
6. Slide T/P switch to center.
To use:
1. Lift handset.
2.
Press programmed button,
or press
Feature or dial #
and dial 3-digit company-
supplied speed dial code.
(Before using # sign, you
must lift handset.)
Special Characters Table
Features that dial numbers automatically may need special characters
to allow for correct dialing or system response.
Press...See... Means...
Drop s
Hold p
confer- f
ence
## #
# #
Stop. Halts dialing sequence to allow for system
response.
Pause. Inserts 1.5 sec. pause in dial sequence.
Multiple consecutive pauses allowed.
Flash. Sends switchhook flash. Must be first entry in
sequence.
For Extension Programming only ( [Prog] ): End of
Dialing. Used to signal end of dialing sequence or
used to separate grouped digits, for example,
account codes from number dialed.
End of Dialing. Used to signal end of dialing
sequence or used to separate grouped digits, for
example, account codes from number dialed.

FEATURES & PROGRAMMING
Programming Buttons
1. Label a button.
2. Slide T/P switch to P.
Programming Features Programming a
Some features set up how your phone
Feature Button
works and are not programmed onto a
1. Label a button.
button. The ‡ in the Programming
3. Press labeled button.
Codes Table flags these features. To
2. Slide T/P switch to P.
4. Dial programming code.
set these features:
3. Press labeled button.
1. Slide T/P to P.
5. Repeat Steps 3 and 4 if
4. Dial ✱ 20.
programming other buttons. 2. Press
ICOM or SA button.
3. Dial programming code. 5. Slide T/P switch to center.
6. Slide T/P switch to center. 4. Repeat Steps 2 and 3 for
additional phone set up
features.
5. Slide T/P to center.
Programming Codes
Account Code Entry ✱ 82 + code
Park
✱ 86
Auto Answer All ◆ ✱ 754
Personalized Ring ‡
✱ 32 + ring(s) (l-8)
Auto Answer on Intercom
✱ 753
Personal Speed Dial
#+ (01-24) +
Auto Dial
✱ 21 + phone no.
inside ◆ ✱ 22 + extension
Pickup
outside ◆ ✱ 21 + number
Callback general pickup
✱ 9
group pickup
✱ 88
automatic callback off ‡
✱✱ 12
inside
✱ 9 + extension
automatic callback on ‡
✱ 12
outside ✱ 9 + line
selective callback
✱ 55 Privacy
✱ 31
Call Waiting Reminder Service
off ‡
✱✱ 11
set reminder
✱ 81
on ‡
✱ 11
cancel reminder
✱✱ 81
Camp-On ✱ 57 Ringing Options
Coverage abbreviated on ‡
✱ 341
coverage VMS off ◆
✱ 46
abbreviated off ‡
✱ 342
group ◆
✱ 42 + group
delayed all lines ‡
✱ 346
inside and outside ‡ ✱ 48 delayed one Iine ‡
✱ 36
off ◆
✱ 49
immediate all Iines ‡
✱ 347
outside only ‡
✱✱ 48 immediate one Iine ‡
✱ 37
primary individual coverage ◆ ✱ 40 + extension
no ring all Iines ‡
✱ 345
secondary individual
no ring one line ‡
✱ 35
coverage ◆
✱ 41 + extension
Saved Number Dial ◆
✱ 85
Do Not Disturb
✱ 47 Signaling and Notify
Forward ✱ 33 signaling ◆
✱ 23 + extension
Last Number Dial
✱ 84
notify receive ◆
✱ 758+ extension
Messaging
notify send ◆
✱ 757 + extension
delete message
✱ 26
System Speed Dial
✱ 24 + (code)
leave message ✱ 25 Voice Announce
next message
✱ 28
on ‡
✱ 10
posted message ◆
✱ 751
off ‡
✱✱ 10
return call ✱ 27
scroll
✱ 29
Paging: group ✱ 22 + group ext.
No diamond means the feature can
◆ Denotes features that must be ‡ Denotes features that setup how
also be accessed from a feature code. programmed onto a line button. your phone works; they are not
used by pressing a programmed
button.

OFTEN USED FEATURES
Callback
Account Code Entry
To program:
Use Callback to be notified when a
busy extension or outside line is
free. Callback works only for busy
extensions on ICOM button phones;
use Line Request for busy outside
lines. On SA button phones,
Callback works with busy inside
extensions; it works with busy
outside lines only on SA or Pool
buttons. Selective callback which
activates feature on call-by-call
basis is available on Feature
screen, from a feature code, or from
a programmed button. You must
program your phone for automatic
callback which activates feature for
every call.
To turn automatic callback on/off:
Press Feature and dial 00.
1.
2.
3.
4.
Label a button.
Slide T/P to P.
1.
Press any ICOM or SA button
Dial ✱ 12 to turn on or ✱✱ 12
to turn off.
2.
3.
Press labeled button.
Dial
✱ 82.
Press Feature and dial ✱ 00.
Press Feature and dial ✱ 00.
4.
5.
To use automatic callback:
To
1.
enter an account before calling:
1. When you hear five short
beeps after you reach a busy
extension or outside line,
hang up.
Press programmed
Account
Code
button, or press Feature
and dial 82.
2.
3.
4.
Dial account code, followed by #.
2. Lift handset after one long ring
and three short rings. Press outside line or
SA button.
To program a selective callback 3. For inside calls, extension or
button:
number is automatically dialed.
Lift handset or press Speaker-
phone.
5.
Dial number (including dial-out
1. Label a button. To cancel a queued callback code if using
SA button).
2. Press
Feature and dial 00.
request:
3. Press labeled button.
1. Press the button the call is on. Repeat Steps 1 and 2 to change an
account code during a call. Caller
does not hear you enter the account
code. Account code cannot be
changed if it was entered for the call
before the call arrived.
4. Dial
✱ 55.
2. Lift handset.
5. Press Feature and dial ✱ 00.
3. Press Drop.
4. Press the button the call is on.
To use selective callback for busy
extension:
Hold
When you hear fast busy
signal press programmed
button or press
Feature and
dial 55.
Hang up after five short beeps.
Lift handset after one long ring,
and three short rings.
1.
Press the Hold button to put a call
or conference on hold. As a
reminder, your phone beeps every
60 seconds.
2.
3.
When the hold timer expires, a Call
on Hold message is displayed on
display phones.
To use selective callback for busy
outside lines:
When you hear fast busy
signal, press
Feature and dial 55,
or press programmed button
you get dial tone. Finish dialing
if necessary.
Hang up after five short beeps.
Lift handset after one long ring,
and three short rings.
1.
2.
3.

OFTEN USED FEATURES
Call Waiting
Single beep means inside call
waiting; two beeps mean outside
call waiting.
To turn call waiting on/off:
1. Press Feature and dial 00.
2. Press any ICOM or SA
button.
3. Dial ✱ 11 to turn on or
✱✱ 11 to turn off.
4. Press
Feature and dial ✱ 00.
To complete a call and answer
call waiting:
1. When you hear Call Waiting
tone, hang up.
2. Lift handset when phone rings.
To put call on hold and pick up
call waiting:
1.
2.
3.
Press Hold.
Press ICOM Originate Only
or SA Originate Only button.
(You must have ICOM
Originate Only
or SA
Originate Only button
available to pickup call.)
Press Feature and dial 87.
To return to call on hold,
press button with fast
flashing light.
Pickup
To program:
1.
2.
3.
4.
5.
Label a button.
Slide T/P switch to P.
Press labeled button.
Select one of the following:
● Dial ✱ 9. For a specific
line or extension, dial line
number or extension.
● Dial ✱ 88 for group pickup.
Slide T/P switch to center.
To use:
●
Press programmed button,
or press
Feature and dial
9. If button not programmed
for specific line or extension,
you can manually dial line
number or extension, if
desired.
●
Group Pickup can also be
accessed by pressing
Feature and dialing 88.
Park
To program:
See
Programming Buttons.
To use park and speakerphone
page:
1. Park the call.
●
Press programmed Park
button.
●
Press Transfer, dial your
extension, and press
Transfer again or hang up.
2. Setup page.
●
1
2.
●
1.
For speakerphone page:
Press appropriate
Group Page or Page All
button, or press any
ICOM or SA button
and dial Group Page or
Page All extension.
Announce call and give
your extension.
For loudspeaker page:
Press programmed
Loudspeaker Page
button or press Feature
and dial 9 and loud-
speaker page line number.
If necessary, dial the code
for the page zone.
2. Announce call and
extension where call is
parked.
To pickup a parked call:
1.
2.
3.
Lift handset.
Press programmed
Pickup
button, or press Feature
and dial 9.
Dial extension where call is
parked.

OFTEN USED FEATURES
Do Not Disturb
To program:
1.
Label a button.
2.
Slide T/P switch to P.
3.
Press labeled button.
4. Dial ✱ 47.
5.
Slide T/P switch to center.
To use:
●
Toggle the programmed
button on and off.
Last Number Dial
To program:
1. Label a button.
2. Slide T/P switch to P.
3.
Press button to be programmed.
4. Dial ✱ 84.
5.
Slide T/P switch to center.
To use:
1.
Press the same type of
button used to place the
first call, (for example,
ICOM or SA).
2.
Press programmed button,
or press
Feature or # and
dial
84. (Before using # sign,
you must lift handset.)
Saved Number Dial
To program:
1. Label a button.
2.
Slide T/P switch to P.
3.
Press button to be programmed.
4.
Dial ✱ 85.
5. Slide T/P switch to center.
To save and redial:
1. Press programmed button
before hanging up.
2.
To redial call, press same
type of button used to
place the call (
lCOM or SA ).
3.
Press programmed button.
Paging
To program speakerphone
paging button:
1.
Label a button as Group
Page-(name) or Page All.
2.
Slide T/P switch to P.
3.
Press labeled button.
4.
Dial ✱ 22 and Group Page
or Page All extension.
5.
Slide T/P switch to center.
To use speakerphone paging:
1. Press an ICOM or SA
button.
2.
Lift handset.
3.
Press programmed button
or dial company-provided
Group Page or Page All
number.
4. Make announcement
after beep.
To use loudspeaker paging:
1.
2.
3.
4.
Lift handset.
Press programmed button,
or press Feature and dial
9 and Loudspeaker Page
line number.
Dial code for company-
defined zone if necessary.
Make announcement.
Coverage
For coverage, a co-worker
must program an individual
coverage button on his/her
phone for either primary or
secondary coverage.
(Secondary coverage offers a
two ring delay so you may
answer before calls are
covered. Primary coverage
sends the call irnmediately to
coverage.) You can program
buttons for Coverage Off or
Coverage VMS Off. To prevent
coverage of inside or inside
outside calls, use the following
procedure:
To program which calls are
covered:
1. Slide T/P switch to P.
2. Press an ICOM or SA
button.
3. Dial ✱✱ 48 for
outside-only calls, or
dial ✱ 48 for both
inside and outside calls.
4. Slide T/P switch to
center.
To program a Coverage OFF
button or a Coverage VMS
OFF
button:
1. Label a button.
2.
Slide T/P switch to P.
3.
Press labeled button.
4. Dial ✱ 49 for Coverage
Off or ✱ 46 for Coverage
VMS Off.
5.
Slide T/P switch to
center.
To use buttons:
●
Toggle On the
Coverage VMS OFF
button to prevent outside
calls from being sent to
voice mail.
●
Toggle On the
Coverage OFF button
to stop all calls from
being sent to
coverage.

MESSAGING
Accessing Features
Some features must be programmed onto a line button while others can
be accessed from a feature code or a programming code. Other features
can be accessed from a feature code only. To access features, use the
appropriate method as follows:
● Dial a feature code:
● Press programmed button, if
1.
Press Feature button or
available.
dial #. (Before using # sign,
you must lift the handset.
2. Dial the feature code.
Feature Codes
Account Code Entry
82+ code
Callback Selective 55
Call Waiting †
pick up a call waiting call † 87
Camp-On
57
Follow Me
Forward 34 +extension
inside 33 +extension
outside
33 + dial-out code +
number + #
Forward and Follow Me
cancel from all extensions
✱ 34 ✱
cancel from one extension
✱ 34 + extension
cancel from your phone
33 + your extension
Last Number Dial
84
Messaging
cancel message †
✱ 53 + extension
delete message ❖
✱ 26
leave message
25
next message ❖ 28
return call ❖
27
scroll ❖
29
turn message light off
(non-display) 54
Paging
loudspeaker page 9+line number+zone code
Personal Speed Dial †
code (01-24)
Pickup
group pickup
88
inside 9 + extension
outside
9 + line number
Privacy
off
✱ 31
31
Reminder Service
set reminder 81 +time + A or P
cancel reminder
✱ 81
System Speed Dial
code (800-739)
Leave Messages
On busy or unanswered phone:
●
Press programmed Leave
Message
button or press
Feature and dial 25.
On display phones without calling:
1. Press
Feature and dial 53.
2. Dial extension.
Cancel Messages
1. Press Feature and dial ✱ 53.
2. Dial extension.
Receive Messages
Red message light is on when you
have a message or fax, if you are
programmed to to be notified of fax
arrivals.
To turn your message light off:
●
Press the Message button.
Post Messages
You must have programmed a
message button using feature
code ✱ 751.
1. Press programmed Posted
Message
button.
2. Dial code for message to be
posted (01-20).
To cancel posted messages:
1. Press programmed Posted
Message button.
2. Dial 00.
† Available only via feature code.
❖ Display phones only.