ATCOM AT800D User manual

AT-800D
AT-800D
AT-800D
AT-800D Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
AT-800D
AT-800D
AT-800D
AT-800D Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
Version 1.0
20 12- 6-25

AT-800D
AT-800D
AT-800D
AT-800D Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
Catalog
Catalog
Catalog
Catalog
1、Installation and access
.........................................................................................................
3
1.1 Power on
........................................................................................................................
3
1.2 Connect to network
........................................................................................................
3
2、Configure AT-800D to make VoIP calls
.................................................................................
4
2.1 LAN Config
......................................................................................................................
4
2.2 SIP Config
........................................................................................................................
5
3、Login indicator
......................................................................................................................
7

AT-800D
AT-800D
AT-800D
AT-800D Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
1
1
1
1、Installation
Installation
Installation
Installation and
and
and
and access
access
access
access
Installation:
Using AT-800D as below scene:
Internet
PC
Switch
AT 800 D
AT 800 D
AT 800 D
SIP Server
1.1
1.1
1.1
1.1 Power
Power
Power
Power on
on
on
on
1.
Plug in network cable
at LAN port.
2. Plug in the power jack with DC 12V/ 500m A.
3. AT-800D will show loading bar and ATCOM logo, and then come into idle
display after boot up absolutely .
1.2
1.2
1.2
1.2 Connect
Connect
Connect
Connect to
to
to
to network
network
network
network
1. Press <menu> soft-key, inputting default password 123 to enter menu
settings. Then press <OK> key to enter menu settings. Check your IP
address at option 9 .Network �1.WAN �2.Current IP.
2. Modify IP address of your PC to be in the same network as AT-800D.
3.
Inputting AT-800D IP address at browser and pressing enter key can
access the web interface of AT-800D. Default is in user login, and you can
click “ admin ” button at the left side of webpage(under the logo) to
change to admin login.

AT-800D
AT-800D
AT-800D
AT-800D Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
2
2
2
2、Configure
Configure
Configure
Configure AT-800D
AT-800D
AT-800D
AT-800D to
to
to
to make
make
make
make VoIP
VoIP
VoIP
VoIP calls
calls
calls
calls
2.1
2.1
2.1
2.1 LAN
LAN
LAN
LAN Config
Config
Config
Config
E nter Network
Network
Network
Network �
�
�
�LAN
LAN
LAN
LAN Port
Port
Port
Port to set the L AN setting :
AT-800D supports three different IP types: Static IP, Dynamic obtain IP
(DHCP) and PPPoE. Y ou can use either of these IP types to connect the
internet.
Use
Use
Use
Use DHCP:
DHCP:
DHCP:
DHCP:
---- Select DHCP
If you have a DHCP server in your network , AT-800D will automatically
obtain the network information from your DHCP server.
Use
Use
Use
Use Static
Static
Static
Static IP:
IP:
IP:
IP:
---- Select “ S tatic ” ;
---- Enter the AT-800D ’ s IP address in the “ IP address ” field.

AT-800D
AT-800D
AT-800D
AT-800D Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
---- Set the “ Subnet Mask ” , default 255.255.255.0
---- Enter the AT-800D ’ s upper gateway IP address ( for example: Router ) in
the “ Default Gateway ” field
---- Key in the DNS information in the “ Primary DNS ” and “ Secondary DNS ”
fields.
Use
Use
Use
Use PPPoE:
PPPoE:
PPPoE:
PPPoE:
---- Select PPPoE
---- Type your PPPoE dialup information in the PPPoE setting fields: PPPoE
server ( option), Username and password.
T hen connect AT-800D to the Ethernet port of the modem, it will connect to
the internet through PPPoE, and automatically obtain the IP address, Subnet
M ask , Default Gateway, Primary DNS and Secondary DNS information.
Click <Submit> button on webpage to save the change and make a auto
reboot.
2.2
2.2
2.2
2.2 SIP
SIP
SIP
SIP Config
Config
Config
Config
2.2.1
2.2.1
2.2.1
2.2.1 SIP
SIP
SIP
SIP server
server
server
server config
config
config
config
E nter Account
Account
Account
Account �
�
�
�Account
Account
Account
Account setting page and set the sip information

AT-800D
AT-800D
AT-800D
AT-800D Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
----
---
---
--- Enable:
Enable:
Enable:
Enable: choose yes ;
----
----
----
---- SIP
SIP
SIP
SIP Server
Server
Server
Server :
sip server address;
----
----
----
---- SIP
SIP
SIP
SIP Port
Port
Port
Port :sip se rver register port;
Click <Submit> button on webpage and it will display <please wait,
restating … > on LCD.
Outbound proxy server, Register Expires, SIP 100Rel Enable, Transport Type
are optional
parameters set as you need. If there is no particular requirement on these
parameters, please leave them as default settings.
2.2.2
2.2.2
2.2.2
2.2.2 SIP
SIP
SIP
SIP account
account
account
account config
config
config
config
1. After the restart, it will enter idle status and LCD will show like following:

AT-800D
AT-800D
AT-800D
AT-800D Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
2. Press <Login> button, input phone number at <Username>, input
password at <Password>. And then pressing <OK> key to confirm and start
registering.
3. When registration is successful, Login indicator will turn off and LCD
display like following:
3
3
3
3、Login
Login
Login
Login indicator
indicator
indicator
indicator
Login
Login
Login
Login indicator
indicator
indicator
indicator A
A
A
A T
T
T
T -800D
-800D
-800D
-800D status
status
status
status
Red/flashing LAN Disconnected
Red/stable SIP unregister
O ff SIP register ok
T hen you can make calls when the L AN and SIP config are correct.
AT-800D just supports headset calls.