ATCOM CT1X User manual

CT1X Quick Start Guide
Version：2.0
2017-3-7

CT1X Quick Start Guide
2
Content
1、Installation and access.................................................................................................................错误！未定义书签。
1.1 Connection.............................................................................................................................错误！未定义书签。
1.2 Connect the headset...............................................................................................................错误！未定义书签。
1.3 Check IP address................................................................................................................... 错误！未定义书签。
1.4 Enter the Setting of telephone............................................................................................... 错误！未定义书签。
2、Quick Configuration....................................................................................................................错误！未定义书签。
2.1 Network Configuration......................................................................................................... 错误！未定义书签。
2.2 Account Configuration.............................................................................................................................................7
3、Login indicator.............................................................................................................................................................10

CT1X Quick Start Guide
3
1. Installation and access
1.1 Connection
1) Power on
1. Plug in the power jack with DC 5V/1000mA
2. All led will be lighted once and then turn off
3. After absolute boot up, login led will be lighted in red and come into standby mode.
2) Connect to network
Connect network cable:
Look as below scene:
Plug in network cable at LAN port, the phone should obtain an IP address in default net settings,
mostly like 172.16.0.54.

CT1X Quick Start Guide
4
1.2 Connect the headset
Connect the RJ9 headset to the headset jack on the left side of the phone, The pin sequence of
RJ9 port on the phone is like following picture:
1.3 Check IP
The phone uses DHCP mode by default,
Please press “Menu”→“Status” to check the IP address when it is powered on and connected to
the network.

CT1X Quick Start Guide
5
1.4 Enter the Setting of telephone
Connect the PC and telephone in one network, input the IP address of telephone at a browser and
press “Enter”, you will be required to input the username and password to access the web page.
The username/password as below:
Username
Password
Description
admin
admin
For Administrators
user
user
For General Users
2. Quick Configuration
After login to the webpage, you’re able to set the phone by quick configuration. Configure it
quickly via Web: “Basic”→“Wizard”
User should set the below two parts in turn,
1.Network——LAN Port
2.Account——SIP
2.1 Enter the Setting of phone
There are 2 options for network access,
1.If chosen DHCP, the phone will be assigned a IP address automatically, click the button “Next”

CT1X Quick Start Guide
6
to enter the web page of “Account Configuration”.
2.If chosen Static IP，user should input the IP address manually for the phone, click the button
“Next” to enter the web page of “Static IP Address”.
After IP address filled manually, click the button “Next” to enter the web page of “Account
Configuration”, or click the button “Back” to back to web page of “Network Configuration”.
Network Configuration can be completed in below webpage:
Via web “Network”→“Basic”

CT1X Quick Start Guide
7
2.2 Account Configuration
The account configuration info will be saved to Line.

CT1X Quick Start Guide
8
Click the button “Finish” to save network configuration and account configuration, and click
“Back” back to the previous web page.
Account Configuration can be completed in below webpage:
Via web “Account”→“Basic”
3. Login indicator
Login indicator
Status
Red/flashing
Network disconnected
Red/stable
SIP unregister
off
SIP register ok