ATCOM AT840 series User manual

AT840
AT840
AT840
AT840 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
AT840
AT840
AT840
AT840 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
Version 1. 0
201 3 - 01 - 15

AT840
AT840
AT840
AT840 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
1、Installation and access
......................................................................................................
3
Ø Installation
...............................................................................................................................
3
Ø Feet installation instruction
...............................................................................................
3
Ø Check IP
...................................................................................................................................
5
Ø Login to AT840's webpage
................................................................................................
5
2、Configure AT840 to make VoIP calls
............................................................................
6
Ø Network
....................................................................................................................................
6
Ø Set password
..........................................................................................................................
6
Ø SIP Settings
............................................................................................................................
7

AT840
AT840
AT840
AT840 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
1
1
1
1
、
、
、
、
Installation
Installation
Installation
Installation and
and
and
and access
access
access
access
�
�
�
�
Installation
Installation
Installation
Installation
Set up AT840 as below:
�
�
�
�
Feet
Feet
Feet
Feet installation
installation
installation
installation instruction
instruction
instruction
instruction
1) Desktop position:
A. Put the bottom side of the IP phone upside and press the plate with letter
“ PUSH ” into the slot, please refer the picture as below:
B. Press the other plate into the slot in accordance with the direction of the
arrow
C. Repeat A and B. It is the right picture of putting on desk after fixing the

AT840
AT840
AT840
AT840 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
two feet below:
D. Disassemble the feet:
Press the plate with word “ PUSH ” and pull the feet with the direction of
arrow. When the plate is pull out of the slot (there will be a sound of “ pa ” )
you can take off the feet
2) On wall position
A. Put the bottom side of the IP phone upside and push the plate with letter
“ PUSH ” into the slot, please refer the picture as below:
B. Push the other plate into the slot in accordance with the direction of the
arrow
C. Repeat A and B. It is the picture of wall mounting after fixing the two feet
below:

AT840
AT840
AT840
AT840 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
D. Disassemble the feet way:
Press the plate with word “ PUSH ” and pull the feet with the direction of
arrow. When the plate is pull out of the slot (there will be a sound of “ pa ” )
you can take off the feet
�
�
�
�
Check
Check
Check
Check IP
IP
IP
IP
If AT840 is connect to your network. AT840 WAN default to use DHCP, and after
connect WAN to Switch, it will obtain IP automatically. Press "Menu"->
"9.Network" you will see AT840 's current IP.
�
�
�
�
Login
Login
Login
Login to
to
to
to AT840's
AT840's
AT840's
AT840's webpage
webpage
webpage
webpage
Modify your computer ’ s IP address to the same network as AT840 . Enter AT840
IP addresses in the web browser to go to the log in page, then you will access
AT840 's user web page.
Click "admin" which is on the right corner to enter administrator webpage.
Attention: Please rotate the hook to the position as in
picture with a coin or other tools

AT840
AT840
AT840
AT840 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
2
2
2
2
、
、
、
、
Configure
Configure
Configure
Configure AT840
AT840
AT840
AT840 to
to
to
to make
make
make
make VoIP
VoIP
VoIP
VoIP calls
calls
calls
calls
�
�
�
�
Network
Network
Network
Network
Enter "Network" -> "Basic" page.
There are 3 ways to connect to the internet DHCP, Static and PPPoE, please
choose one according to your own situation.
�
Network mode: you can choose DHCP, Static and PPPoE
�
DHCP: AT840 default to use DHCP to obtain dynamic IP.
�
Static: If you want to set your ip as static, you should fill ip, netmask,
gateway and DNS information.
�
PPPoE: If connect AT840 to modem, you should fill ADSL account and the
password which assigned by your network service provider.
�
�
�
�
Set
Set
Set
Set password
password
password
password
Enter "Network" -> "Advance" page.
There are 2 models to set the authority of web accessing and command line:
User model and Admin model. All the parameters can be visible and changed in
Admin mode while part of them can be visible in User mode .

AT840
AT840
AT840
AT840 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
�
Enable Web Server: enable or disable web access. If choose "no", you can
not access AT840 webpage.
�
Admin password: set admin webpage access password.(username:admin)
�
User password: set user webpage access password.(username:user)
�
�
�
�
SIP
SIP
SIP
SIP Settings
Settings
Settings
Settings
Enter "Account" -> "SIP" page.
�
Enable : whether enable this sip register.
�
Display Name: This name will display on your screen. It will show the User
ID instead if leave display name as blank.
�
User ID: Username of sip account.
�
Authenticate ID : normally is the same with User ID, can also leave it as
blank if there is no special requirement form your sip server.
�
Password: Password of sip account.
�
S ip Server : SIP server address , support both IP address and domain name.
�
S ip Port: SIP server port , default is 5060.
�
Use Outbound Proxy : Whether to use outbound proxy.
�Outbound Proxy Server ：Normally the Proxy server is the same as SIP server.
If they are different then fill in the correct information that provided by ISP.
�
Outbound Proxy Port: Set your proxy server port.

AT840
AT840
AT840
AT840 Quick
Quick
Quick
Quick Start
Start
Start
Start Guide
Guide
Guide
Guide
ATCOM TECHNOLOGY CO. , LIMITED
�
Register Expire s : register expire time, default is 60 seconds. AT840 will
auto configure this expire time to the server recommended setting if it is
different from the SIP server.
�
Subscribe Expires: The Expires value in SUBSCRIBE message, default is
3600 seconds.
�
Transport Type: UDP/TCP/TLS.
�
SIP 100Rel Require : Require 100rel or not, default is no. If set to yes, the
INVITE message sent will contain the require:100rel header field.
After configured and enabled register this account, please check the status of
this account in System Status page.