AXIOMTEK FAB112-13B1P10 User manual

FAB112-13B1P10 Quick Installation Guide
©Copyright 2010 AXIOMTEK Co., Ltd.
Version A1 Aug 2010
Printed in Taiwan
9419B112010E
4
Board Dimensions
FAB112-13B1P10 Quick Installation Guide
©Copyright 2010 AXIOMTEK Co., Ltd.
Version A1 Aug 2010
Printed in Taiwan
9419B112010E
1
I. Checklist
9FAB112-13B1P10 13-Slot ATX-Supported
PICMG 1.3 Bus Backplane x 1
9Quick Installation Guide x 1
Note1: Please contact your local vendors if any damaged or missing items.
DO NOT apply power to the board if any damaged components.
II. Jumper List
Jumper Description
JP1 Open : ATX by CPU Card
Short : ATX Power Always On
JP2
(Reserved)
Auto Power Button(Optional)
Open : Disable
Short : Enable
III. Connectors
Connector Description
CN1 ATX Power Connector
CN2 12V 8Pin(+12V Auxiliary Power Connector)
CN3 8-Pin Power Connector for thermal board
CN4 SM Bus Connector
CN5,CN6,CN7 (Reserved) COM Ports and DIO Connector (Optional)
CN8,CN9,CN10,CN11(Reserved) Thermal sensor Connector for FAN1,FAN2 &
FAN3,FAN4(Optional)
CN12 PCIex16 SDVO Control Signal Connector
CN13 IPMB Connector
CN14 +3.3V/5V Auxiliary Power Connector
CN15 +3.3V Auxiliary Power Connector
CN16 +5V Auxiliary Power Connector
USB1,USB2 USB 0,1,2,3 Connector
PWRBT1 ATX Power Button Connector
HWRST1 Hardware Reset Connector
FAN1,FAN2,FAN3,FAN4 FAN Connector
SHB1 – SHB4 PICMG 1.3 Full-Size SBC Slot

FAB112-13B1P10 Quick Installation Guide
©Copyright 2010 AXIOMTEK Co., Ltd.
Version A1 Aug 2010
Printed in Taiwan
9419B112010E
2
SPCI1-SPCI7,PPCI1-PPCI3 PCI Slots 32-bit/33MHz
PCIE1 X16 PCIe Slot
PCIEB1 X4 PCIe Slot (Note 2)
SATA1;SATA2(Reserved) SATA1,2 Connector (Optional)
Note 2: Follow by PICMG1.3 standard, The ports for the B[3:0] link was
configured to one x4 PCIe(PCIEB1 slot on BP), The x4 PCIe link is
able to support x1 and x4. If the x4 PCIe slot can not support x4
PCIe card, please contact your SBC Card vender first.
Power Connector (CN1;CN2;CN3;CN14;CN15;CN16)
CN1 CN2 CN3
CN15
CN14
CN16
FAB112-13B1P10 Quick Installation Guide
©Copyright 2010 AXIOMTEK Co., Ltd.
Version A1 Aug 2010
Printed in Taiwan
9419B112010E
3
Power ON/OFF Push Button Connector (PWRBT1)
Pin Signal
1 PWR_BT
2 GND
Hardware Reset Connector (HWRST1 )
Pin Signal
1 HW_RST
2 GND
SM Bus Connector (CN4)
Pin Signal
1 +5V
2 SM_CLK
3 SM_DAT
4 GND
FAN Connector (FAN1,FAN2,FAN3,FAN4)
Pin Signal
1 GND
2 +12V
3 N.C or Rotation
Detection (Reserved)
USB Connectors (USB1, USB2)
Pin Signal Pin Signal
1 USB Power 2 USB Power
3 USB P0- 4 USB P1-
5 USB P0+ 6 USB P1+
7 USB GND 8 USB GND
10 GND