BEGA 71 128 Manual

Installation and Technical Information
BEGA
Bollard Tube Options:
Please refer to bollard head


Replacement Parts:

LED system bollard - luminaire head - unlit cap 71 128
Tools Required:

Relamping/Maintenance

Notice to Installer for 71 128:

NOTE: For proper installation, an accompanying system bollard tube must be
selected with the bollard head.
71 128 installation:
 

 
 
 
Dimensions
A:″
B:
 Part No
BEGA  71 128
03/29/2019
1 of 2

A
B

Installation and Technical Information
BEGA

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
SUITABLE FOR WET LOCATIONS.
MIN 90°C SUPPLY CONDUCTORS.
CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D’INSTALLATION PERTINENT, PAR UNE PERSONNE QUI CONNAÎT
BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS.
CONVIENT AUX EMPLACEMENTS MOUILLÉS.
LES FILS D’ALIMENTATION 90°C MIN.
Product Safety Warnings:
LED system bollard - luminaire head - unlit cap 71 128
BEGA  71 128
03/29/2019
2 of 2