Bend-Pak HDS-14X User manual

BendPak, Inc. Corporate Oce
1645 Lemonwood Drive
Santa Paula, CA 93060 USA
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Customer Service Desk / Warranty
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
customerservic[email protected]
Parts Orders
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Domestic Sales & Service
USA Sales Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
International Sales & Service
Oce Tel: [phone]
Exports Dept: 1-805-933-9970 EXT. 192
Ext. Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
bpkex[email protected]om
Service Manual
SERVICE PARTS & DIAGRAMS
This guide is a troubleshooting reference used for maintaining and
servicing your Bend Pak product. It provides comprehensive information
on identifying serviceable parts and components and assists in
troubleshooting problems and performing assembly /disassembly
procedures.
BENDPAK
HDS-14X
PRODUCT SKU
5175173
DRAWING Nº
5260599
CATEGORY
Four Post Li
REV
Version H
DATE
08.29.2022

DIMENSIONS ARE IN MM
☺
1
2
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5245083 HDS-14X LIFT SUPERSTRUCTURE 1 F
2 5250144 HDS-14X PARTS BOX 1 M
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
F
REPLACED LABELS WITH COLORS &
GRAPHICS NOTE
09/27/2021 TM 01344
G UPDATED BOM REVISION 05/24/2022 TM 01414
H
WAS 120.6 NOW 102.9, UPDATED BOM
REVISION
08/11/2022 TM 01436
SHEET 1 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
CA
5260599
HDS-14X PRODUCTION
LIFT VER D (CE CERT)
12/05/2019
DO NOT SCALE DRAWING
1:40
SCALE:
THIRD ANGLE PROJECTION
OR
08/16/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 3.

1970.0mm
77.559in
2338.0mm
92.047in
48.355in
1228.2mm
3.504in MAX
89.0mm MAX
4.090in
103.9mm
6.732in
171.0mm
70.827in
1799.0mm
A
B
5816.0mm
228.976in
6170.0mm
242.913in
3050.0mm
120.079in
508.0mm
20.000in
271.963in
6907.9mm
17.638in
448.0mm
[34.488 MIN - 41.653in MAX]
876.0 MIN - 1058.0mm MAX
130.079in
3304.0mm
68.780in
1747.0mm
DRIVE THRU
FRONT VIEW
4.051in
102.9mm
DETAIL A
SCALE 1 : 15
4.016in
102.0mm
DETAIL B
SCALE 1 : 15
SHEET 2 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260599
HDS-14X PRODUCTION
LIFT VER D (CE CERT)
1:50
SCALE:

20.669in
525.0mm
LOWEST LOCK
7.559in
192.0mm
LOWERED
76.339in
1939.0mm
TOP LOCK
77.559in
1970.0mm
RAISED
SHEET 3 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260599
HDS-14X PRODUCTION
LIFT VER D (CE CERT)
1:35
SCALE:
DIMENSIONS SHOWN ARE WITH THE LOCK LADDERS ADJUSTED ALL THE WAY UP 1.

DIMENSIONS ARE IN MM
☺
A
B
1
2
8
6
7
5
4
3
DETAIL A
SCALE 1 : 3
9
11
10
DETAIL B
SCALE 1 : 22
13
15
12 14
NEXT ASSEMBLY
5260599
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5620606 HDS-14 POWER SIDE POST WELDMENT 1 A
2 5620605 HDS-14 POST WELDMENT 3 A
3 5216148 HDS-14 CROSSTUBE ASSEMBLY, SMALL WINDOW 1 A
4 5215104
D4-12, HD/HDS/HDSO-14 DRIVE UP RAMP ASSEMBLY
2 J
5 5216147 HDS-14 CROSSTUBE ASSEMBLY, LARGE WINDOW 1 A
6 5215241 HDS-14X POWER SIDE RAMP ASSEMBLY 1 U
7 5601437 HDS-14X OFF SIDE RAMP WELDMENT 1 A
8 5600915 HDS/HDSO-14 SAFETY LADDER WELDMENT 4 B
9 5535017 NUT M20 x 2.5 NL 4 -
10 5535303 NUT M20 x 2.5 4 -
11 5545343 WASHER, M20 FLAT 4 -
12 5746382
D4-12, HDS-14 SPACER, SAFETY LADDER, 15mm LG
4 A
13 5530167 HHB M10 x 1.5 x 45mm 4 -
14 5535013 NUT M10 x 1.5 NL 4 -
15 5545341 WASHER M10 x Ø20 FLAT 8 -
WHERE USED
HDS-14X
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
D UPDATED BOM REVISION 08/23/2021 CA 01322
E
REPLACED 5215663 WITH 5215148,
5215597 WITH 5215147
05/23/2022 TM 01414
F UPDATED BOM REVISION 08/11/2022 TM 01436
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
CA
5245083
HDS-14X LIFT
SUPERSTRUCTURE
12/05/2019
DO NOT SCALE DRAWING
1:45
SCALE:
THIRD ANGLE PROJECTION
OR 08/16/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
THREAD M20 HARDWARE ONTO LADDER BOLTS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
A
6
1
3
4
8
7
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
DETAIL A
SCALE 1 : 10
5
2
WHERE USED
HDS-14X
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
R UPDATED BOM REVISION 03/16/2018 TM 00927
T UPDATED BOM REVISION 11/05/2020 CA 01227
U
REPLACED (1) 5620244 AND (1) 5620245
WITH 5600260
08/23/2021 CA 01322
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600268 HDS-14X POWER SIDE RAMP WELDMENT 1 E
2 5215664 HDS/HDSO-14 CYLINDER FLANGE ARM ASSEMBLY 1 C
3 5215015 HDS-14 SERIES RAMP SHEAVE ASSEMBLY 6 C
4 5600260 HDS/HDSO-14 SHEAVE PIN WELDMENT 2 C
5 5736821 HDS-14 CABLE RETAINER PLATE 1 A
6 5502110 CYLINDER ASSEMBLY Ø3.5 x 70 1 K
7 5545341 WASHER M10 x Ø20 FLAT 2 --
8 5530281 HHB M10 x 1.5 x 10 2 --
NEXT ASSEMBLY
5245083
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
U
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
GJZ
5215241
HDS-14X POWER SIDE
RAMP ASSEMBLY
11/26/2008
DO NOT SCALE DRAWING
1:28
SCALE:
THIRD ANGLE PROJECTION
OR 09/15/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
VERIFY CYLINDER PORTS ARE CAPPED OFF WITH 2.
STEEL 3/8" NPT PLUG
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 3.
ASSEMBLE ITEMS AS SHOWN 4.

238.189in
6050.0mm
21.496in
546.0mm
CYLINDER PORTS
ON THIS SIDE
7.693in
195mm
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
U
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5215241
HDS-14X POWER SIDE
RAMP ASSEMBLY
1:15
SCALE:

DIMENSIONS ARE IN MM
☺
1
6
24
DETAIL A
SCALE 1 : 6
3
15
19
5
18
1320
16
10
8
9
12
7
14
2
17
4
11
22
21
23
25
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601814 HDS-14 CROSSTUBE WELDMENT, LARGE WINDOW 1 A
2 5215013 HDS-14 CROSSTUBE SHEAVE ASSEMBLY 2 B
3 5575380 D4-12, HD/HDS/HDSO-14 SAFETY ROLLER 2 C
4 5600044 4 POST LIGHT DUTY SLACK SAFETY WELDMENT 2 F
5 5600173 D4-12, HD/HDS/HDSO-14 SHEAVE PIN WELDMENT 2 G
6 5716005
D4-12, HD-7/7500/9/14/HDSO-14 POLYETHYLENE SLIDE
BLOCK
8 M
7 5746008 D4-12, HD/HDS-7/7500/9/14, HDSO-14 SAFETY PIN 2 D
8 5600760 D4-12, HD/HDS LIGHT DUTY SAFETY WELDMENT 2 C
9 5540275 E RING Ø25mm OD DIN 6799 0250 8 -
10 5502195 AIR CYLINDER, Ø19mm x 25 STROKE 2 -
11 5530005 HHB M6 x 1 x 70 6 -
12 5545005 WASHER, M6 x 12mm FLAT 4 -
13 5535112 NUT M6 x 1.0 4 -
14 5505030 PUSH-ON CLIP Ø10mm SS 2 -
15 5540065 SPRING Ø13mm x 90mm, SLACK SAFETY 2 A
16 5540002 E RING Ø1.375" OD TRUARC X5133-137 2 -
17 5505625 FEMALE ROD END M6 x 33 2 -
18 5550087 FTG ELB -04 COMP x -02 NPT 2 -
19 5530756 HHB M6 x 1.0 x 25mm 2 -
20 5545032 WASHER M36 x 66 FLAT 2 -
21 5755136 AIR CYLINDER SPACER 12mm 2 A
22 5755137 AIR CYLINDER SPACER 25mm 2 A
23 5535357 NUT M6 x 1.0 NL 4 -
24 5755157 D4-12, HD-7/7500/9 CROSSTUBE SPACER Ø16 x Ø10 x 50 2 A
25 5535230 NUT 1/4-28 JN 2 -
NEXT ASSEMBLY
5245082
5245083
5245084
5245085
WHERE USED
HDS-14
HDS-14X
HDS-14LSX
HDS-14LSXE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215597 04/28/2022 TM 01414
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216147
HDS-14 CROSSTUBE
ASSEMBLY, LARGE WINDOW
04/28/2022
DO NOT SCALE DRAWING
1:20
SCALE:
THIRD ANGLE PROJECTION
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
1
24
6
DETAIL A
SCALE 1 : 6
316
13
5
20
12
14
9
11
2
19
15
7
17
8
10
4
22
21
23
18
25
NEXT ASSEMBLY
5245082
5245083
5245084
5245085
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601826 HDS-14 CROSSTUBE WELDMENT, SMALL WINDOW 1 A
2 5215013 HDS-14 CROSSTUBE SHEAVE ASSEMBLY 2 B
3 5575380 D4-12, HD/HDS/HDSO-14 SAFETY ROLLER 2 C
4 5600044 4 POST LIGHT DUTY SLACK SAFETY WELDMENT 2 F
5 5600173 D4-12, HD/HDS/HDSO-14 SHEAVE PIN WELDMENT 2 G
6 5716005
D4-12, HD-7/7500/9/14/HDSO-14 POLYETHYLENE SLIDE
BLOCK
8 M
7 5600760 D4-12, HD/HDS LIGHT DUTY SAFETY WELDMENT 2 C
8 5746008 D4-12, HD/HDS-7/7500/9/14, HDSO-14 SAFETY PIN 2 D
9 5502195 AIR CYLINDER, Ø19mm x 25 STROKE 2 --
10 5505030 PUSH-ON CLIP Ø10mm SS 2 --
11 5505625 FEMALE ROD END M6 x 33 2 --
12 5530005 HHB M6 x 1 x 70 6 --
13 5530756 HHB M6 x 1.0 x 25mm 2 --
14 5535112 NUT M6 x 1.0 2 --
15 5540002 E RING Ø1.375" OD TRUARC X5133-137 2 --
16 5540065 SPRING Ø13mm x 90mm, SLACK SAFETY 2 A
17 5540275 E RING Ø25mm OD DIN 6799 0250 8 --
18 5545005 WASHER, M6 x 12mm FLAT 4 --
19 5545032 WASHER M36 x 66 FLAT 2 --
20 5550087 FTG ELB -04 COMP x -02 NPT 2 --
21 5755136 AIR CYLINDER SPACER 12mm 2 A
22 5755137 AIR CYLINDER SPACER 25mm 2 A
23 5535357 NUT M6 x 1.0 NL 6 --
24 5755157 D4-12, HD-7/7500/9 CROSSTUBE SPACER Ø16 x Ø10 x 50 2 A
25 5535230 NUT 1/4-28 JN 2 --
WHERE USED
HDS-14
HDS-14X
HDS-14LSX
HDS-14 LSXE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215663 05/02/2023 TM 01414
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216148
HDS-14 CROSSTUBE
ASSEMBLY, SMALL WINDOW
05/02/2022
DO NOT SCALE DRAWING
1:20
SCALE:
THIRD ANGLE PROJECTION
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
4
3
9
2
10
6
5
14
12
13
16
8
17
18
19
20
1
7
15
11
21
WHERE USED
HDS-14X
ITEM
NO
PART
NUMBER
DESCRIPTION QTY. REV
1 5174094 D4-12, HD/HDS-14 PARTS BAG 1 G
2 5215096 PUSH BUTTON AIR ASSEMBLY 1 G
3 5505009 D4-12, HD/HDS-14 DRIVE UP RAMP PIN 2 D
4 5600406 HD/HDS-14 TOP PLATE WELDMENT 4 C
5 5216139 FLEX TUBE KIT, UP TO 2000mm 1 A
6 5700029 HD-SERIES FLEX TUBE BRACKET PLATE 1 F
7 5700032 TIRE STOP 2 D
8 5700033 HD-SERIES FLEX TUBE ANGLE 1 E
9 5700072 WHEEL CHOCK 2 B
10 5715003 POWER UNIT VIBRATION DAMPENER 1 B
11 5595065
HDS/HDSO-14 CABLE ASSEMBLY Ø12 x 4100mm ST
1 E
12 5595066
HDS/HDSO-14 CABLE ASSEMBLY Ø12 x 5732mm ST
1 E
13 5595067
HDS-14X/14LSXE CABLE ASSEMBLY Ø12 x 10076mm ST
1 E
14 5595068
HDS-14X/14LSXE CABLE ASSEMBLY Ø12 x 11751mm ST
1 E
15 5570151 HDS-14X HOSE ASSEMBLY Ø6.4 x 4325mm 1 B
16 5570795 1/4" POLY-FLO TUBING 20000mm* -
17 5530456 AB 3/4" x 4 - 3/4" 16 -
18 5900161 HDS-14/14X INSTALLATION MANUAL 1 -
19 5716629 HDS-14 CROSSTUBE COVER, PLASTIC 4 A
20 5210241 4 POST LIGHT DUTY CE PARTS BAG 1 A
21 5930195 ANTI-SLIP TAPE, 6” x 24ft 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
K
ADDED 5210241, REMOVED 5535011 AND
5545345, UPDATED BOM REVISIONS
07/20/2020 TM 01174
L UPDATED BOM REVISION 08/19/2021 CA 01322
M
ADDED 5930195, REPLACED 5570050 WITH
5216139
05/04/2022 TM
01414
PRE A
NEXT ASSEMBLY
5260599
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
M
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5250144
HDS-14X PARTS BOX
05/06/2013
DO NOT SCALE DRAWING
1:35
SCALE:
THIRD ANGLE PROJECTION
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
HOSES AND CABLES IN REPRESENTATIONAL FORM 2.
(*) LENGTHS FOR REFERENCE ONLY 3.

DIMENSIONS ARE IN MM
☺
20
23
DETAIL A
SCALE 1 : 4
1
2
DETAIL B
SCALE 1 : 4
18
17
19
DETAIL C
SCALE 1 : 8
4
3
13
12
DETAIL D
SCALE 1 : 8
97
8
6
14
16
21
22
11
15
DETAIL E
SCALE 1 : 4
10
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E
REPLACED 5550004 WITH 5550089, 5550489
WITH 5550395, UPDATED NEXT ASSEMBLIES
10/29/2013 TM 00593
F
ADDED (4) 5530009, (4) 5545201, (4)
5545347, (4) 5535354, 5550025, 5550026,
AND 5580012
11/25/2019 TM 01120
G REMOVED 5550025 AND 5550026 08/18/2021 CA 01322
NEXT ASSEMBLY
5250143
5250144
5250191
5250194
5250195
5250294
5250295
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5530756 HHB M6 x 1.0 x 25mm 8 -
2 5535357 NUT M6 x 1.0 NL 8 -
3 5535001 NUT M8 x 1.25 NL 4 -
4 5545340 WASHER M8 x24 FLAT 4 -
5 5530010 HHB M8 x 1.25 x 25mm ZPL 4 -
6 5530009 HHB M12 x 1.75 x 90 CL8.8 8 -
7 5545201 WASHER, M12 SPRING LOCK 8 -
8 5545347 WASHER, M12 FLAT WASHER 8 -
9 5535354 NUT, M12 x1.75 8 -
10 5550106 FTG ELB -04JIC x 3/8” NPT 1 -
11 5550395 FTG TEE -04 COMP x -04 COMP x -04 COMP 3 -
12 5550089 FTG ELB -04 COMP x -06 NPT 2 -
13 5550008 FTG ELB -04 JIC -06L ORB 1 -
14 5505032 ROTOR CLIP Ø18mm SS 4 -
15 5530107 HHB M14 x 2.0 x 40 4 -
16 5535107 NUT M14 x 2.0 NL 4 -
17 5545009 WASHER, M4 x 9mm FLAT 2 -
18 5530008 SHCS M4 x 0.7 x 12 BOC 2 -
19 5535010 NUT M4 X 0.7 NL 2 -
20 5545535 C WASHER SHIM FOR LIFTS 20 -
21 5545010 WASHER M14 x 28 FLAT 4 -
22 5545349 WASHER M14 x 22 SL 4 -
23 5580012 LIQUID PTFE THREAD SEALANT 50ml 1 -
WHERE USED
HD-14T
HDS-14 SERIES
D4-12 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5174094
D4-12, HD/HDS-14
PARTS BAG
08/08/2008
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
OR 09/21/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

DIMENSIONS ARE IN MM
☺
1
3
2
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A
PRODUCTION RELEASE, DERIVED FROM
5570050, 5570052, 5570239
05/05/2022 TM
01414
PRE A
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5570053 PE FLEX TUBE Ø34.5xØ29 2100mm* -
2 5555555 WQG1-M36/AD34.5 CONNECTOR 2 -
3 5535050 PLASTIC NUT M36 x 2 2 -
WHERE USED
D4-12 SERIES
HD-14T
HD-7500 SERIES
HD-7W
HD-7P
HD-9 SERIES
HD-973 SERIES
HDS-14 SERIES
HDSO-14 SERIES
HDS-18/27/40 SERIES
NEXT ASSEMBLY
5250058 5250175 5250289
5250059 5250184 5250290
5250079 5250185 5250294
5250081 5250187 5250295
5250082 5250188 5250336
5250143 5250189 5250337
5250144 5250191 5250338
5250164 5250193 5250349
5250167 5250194 5250364
5250168 5250195
5250169 5250278
5250172 5250286
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216139
FLEX TUBE KIT,
UP TO 2000mm
05/05/2022
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
OR 05/10/2022
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
SHOWN IN REPRESENTATIONAL FORM ONLY 2.
(*)LENGTH FOR REFERENCE ONLY

DIMENSIONS ARE IN MM
☺
3
1
6
2
5
4
7
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E REPLACED 5550481 WITH 5550087 10/29/2013 TM 00593
F
REPLACED 5590240 WITH 5590175, UPDATED
NEXT ASSEMBLIES
05/05/2015 MR 00683
G
SWITCHED POSITIONS OF 5550087 AND
5550486, UPDATED NEXT ASSEMBLY
06/16/2016 TS 00765
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5700031 ZERO ANGLE MOUNTING BRACKET 1 C
2 5590175 PUSH BUTTON AIR VALVE 1 -
3 5530043 SHCS M3 x 0.5 x 30 2 -
4 5545024 WASHER, M3 x 9mm FLAT 2 -
5 5535020 NUT M3 x 0.5, NL CL8 2 -
6 5550087 FTG ELB -04 COMP x -02 NPT 1 -
7 5550486 FTG NPL -02 NPT x -04 F NPT 1 -
NEXT ASSEMBLY
D4-12 SERIES
HD SERIES
HDS SERIES
HDSO SERIES
PL-12000DP
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215096
PUSH BUTTON AIR
ASSEMBLY
03/14/2008
DO NOT SCALE DRAWING
2:3
SCALE:
THIRD ANGLE PROJECTION
CA 09/02/2015
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
2
1
3
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
G
G-001
G-002
G-003
G-004
G-005
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
07/30/2010
05/17/2011
10/28/2011
05/16/2013
08/13/2014
09/26/2016
TM
TM
TM
TM
TM
TM
00387
00456
00487
00593
00664
00782
H
H-001
UPDATED BOM REVISION AND NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLY
05/31/2018
08/30/2018
TS
TM
00951
00992
J
REPLACED 5716149 WITH 5716087, REPLACED
5530097 AND 5535357 WITH 5530465, UPDATED
BOM REVISION
08/09/2022 TM 01436
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600138 HD/HDS/HDSO-14 DRIVE UP RAMP WELDMENT 1 G
2 5716087 HDS-14 APPROACH RAMP EDGE GUARD 1 A
3 5530465 BBSS M6 x 1.0 x 12mm 3 --
NEXT ASSEMBLY
5210743
5245081
5245082
5245083
5245084
5245085
5245095
5245096
5245416
5245417
WHERE USED
D4-12 SERIES
HD-14T
HDS-14 SERIES
HDSO-14 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
J
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215104
D4-12, HD/HDS/HDSO-14
DRIVE UP RAMP ASSEMBLY
06/04/2008
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
OR
08/16/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 2.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 3.
ASSEMBLE ITEMS AS SHOWN 4.

A
1
DETAIL A
SCALE 1 : 3
4
5
2
3
NEXT ASSEMBLY
5210228
5215072
5215097
5215241
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600924 HDS/HDSO-14 CYLINDER FLANGE ARM WELDMENT 1 A
2 5716006 HD/HDS/HDSO-14 CYLINDER FLANGE ARM SLIDE 2 F
3 5530247 FHPS M6 x 1 x 40 4 -
4 5535112 NUT M6 x 1.0 4 -
5 5545005 M6 FLAT WASHER 4 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DREIVED FROM 5215033 08/04/2014 TM 00664
B
REPLACED 5530077 WITH 5530247, UPDATED
BOM REVISION
05/01/2017 TS 00829
C UPDATED BOM REVISION AND NEXT ASSSEMBLY 07/07/2017 TM 00843
WHERE USED
HDS-14
HDS-14X
HDSO-14
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED.
TM
5215664
HDS/HDSO-14 CYLINDER
FLANGE ARM ASSEMBLY
08/04/2014
DO NOT SCALE DRAWING
1:4
SCALE:
THIRD ANGLE PROJECTION
AW 7/27/2017
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
ANGULAR: 0. =
2
°
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED

PART SPECIFICATION FORM
ACP
BENDPAK Number:
5570129
MRP Description:
¼” HYDRAULIC HOSE 31 CL-0400X
Date:
05/24/2018
ECO :
00950
1. Engineering Specification
Application:
¼” HYDRAULIC HOSE
Detailed Description:
ONE or TWO BRAID STEEL WIRE HYDRAULIC HOSE
SIZE: 1/4” / 6mm I.D. MIN
0.53” / 13.4mm O.D. MAX
SPECS: 5700PSI OR 393 BAR WORKING PRESSURE MINIMUM
17100PSI OR 1179 BAR MINIMUM BURST PRESSURE MINIMUM
3” / 80mm MIN BEND RADIUS
COLOR: BLACK
ADDITIONAL CONTACT INFORMATION:
Xin Yurong
Shandong Ningjin High Energy Hose Co., Ltd.
Tel: [phone]
No. 7, Taishan Rd., Industrial Park, Ningjin County, Shandong, China
Approved Vendor
Vendor Part #
Contact #
AUTHORIZED
COMPONENT PROVIDER
1) Ningjin Hydraulic Hose
Co.
5570129
[phone]
X
2)
OR BENDPAK ENGINEERING APPROVED EQUIVALENT
2. Vendor Information (Or for Reference)

4325
3
1 2
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A
A-001
PRODUCTION RELEASE
UPDATED NEXT ASSEMBLY
03/11/2009
05/17/2013
GJZ
TM
00249
00593
B REPLACED 5570110 WITH 5570129 03/23/2015 MR 00683
NEXT ASSEMBLY
5250144
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 4247mm* -
2 5550325 FTG NPL Ø1/4 CRIMP x -04 JIC 1 -
3 5550345 FTG ELB Ø1/4 CRIMP x -04 JIC 1 -
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
GJZ
5570151
HDS-14X HOSE ASSEMBLY
Ø6.4 x 4325mm
03/11/2009
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
CA 08/27/2015
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.

29.5
23.0
55.0 4045
4100
13 2
4
5
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
C-001
C-002
UPDATED TITLE TO DENOTE SINGLE THREADED END
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
06/09/2010
05/17/2013
09/26/2016
AC
TM
TM
00366
00593
00782
D UPDATED BOM REVISION 12/28/2017 TM 00909
E ADDED 5535011 AND 5545345 07/20/2020 TM 01174
NEXT ASSEMBLY
5250058
5250059
5250143
5250144
5250194
5250195
ITEM NO PART NUMBER DESCRIPTION QTY. REV
1 5595001 CABLE, LIFTING Ø12 4015mm* -
2 5746020 Ø12 THREADED CABLE CONNECTOR 1 D
3 5746019 Ø12 CABLE END CONNECTOR 1 F
4 5535011 NUT M22 x 2.5 NL 1 -
5 5545345 WASHER M22 x 50mm FLAT 1 -
WHERE USED
HDS-14 SERIES
HDSO-14 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
GJZ
5595065
HDS/HDSO-14 CABLE
ASSEMBLY Ø12 x 4100mm ST
11/18/2008
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
LENGTH SHOWN IS AFTER SWAGING 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.
THREAD 5535011 WITH 5545345 ONTO CABLES FOR SHIPMENT 4.

29.5
23.0
55.0
5732
5677
13 2 5
4
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
C-001
C-002
UPDATED TITLE TO DENOTE SINGLE THREADED END
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMLBIES
06/09/2010
05/17/2013
09/26/2016
AC
TM
TM
00366
00593
00782
D UPDATED BOM REVISION 12/28/2017 TM 00909
E ADDED 5535011 AND 5545345 07/20/2020 TM 01174
ITEM NO PART NUMBER DESCRIPTION QTY. REV
1 5595001 CABLE, LIFTING Ø12 5647mm* -
2 5746020 Ø12 THREADED CABLE CONNECTOR 1 D
3 5746019 Ø12 CABLE END CONNECTOR 1 F
4 5535011 NUT M22 x 2.5 NL 1 -
5 5545345 WASHER M22 x 50mm FLAT 1 -
NEXT ASSEMBLY
5250058
5250059
5250143
5250144
5250194
5250195
WHERE USED
HDS-14 SERIES
HDSO-14 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
GJZ
5595066
HDS/HDSO-14 CABLE
ASSEMBLY Ø12 x 5732mm ST
11/18/2008
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
LENGTH SHOWN IS AFTER SWAGING 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.
THREAD 5535011 WITH 5545345 ONTO CABLES FOR SHIPMENT 4.

10076
29.5
23.0
10021
55
13 2 5
4
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
C-001
UPDATED TITLE TO DENOTE SINGLE THREADED END
UPADTED NEXT ASSEMBLY
06/09/2010
05/17/2013
AC
TM
00366
00593
D WAS 10101 NOW 10076, WAS 10016 NOW 9991 08/31/2016 TM 00778
E ADDED 5535011 AND 5545345 07/20/2020 TM 01174
NEXT ASSEMBLY
5250144
5250195
ITEM NO PART NUMBER DESCRIPTION QTY. REV
1 5595001 CABLE, LIFTING Ø12 9991mm* -
2 5746020 Ø12 THREADED CABLE CONNECTOR 1 D
3 5746019 Ø12 CABLE END CONNECTOR 1 F
4 5535011 NUT M22 x 2.5 NL 1 -
5 5545345 WASHER M22 x 50mm FLAT 1 -
WHERE USED
HDS-14X
HDS-14LSXE
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
GJZ
5595067
HDS-14X/14LSXE CABLE
ASSEMBLY Ø12 x 10076mm ST
11/18/2008
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
LENGTH SHOWN IS AFTER SWAGING 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.
THREAD 5535011 WITH 5545345 ONTO CABLES FOR SHIPMENT 4.