BROSA Elizabeth User manual

v1.0
ASSEMBLY GUIDE
Elizabeth Dining Table

Components
Upon unpacking your dining table from its delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new dining table.
Table top x 1
Stretcher x 1
Leg x 2
Hardware
What you need
E x 8
Spec: Ø8.4 x 2mm
F x 1
Spec: M5
G x 1
Spec: M4
D x 8
Spec: Ø8.4 x 17 x 1.6mm
A x 4
Spec: Ø10 x 48.5mm
B x 4
Spec: M10 x 10mm
C x 8
Spec: M8 x 30mm

Step 1 Insert a steel dowel (A) into both holes in the leg (2)
making sure they are facing the correct direction when
in place. Repeat for the other leg (2).
A x 4
Step 2 Align a leg (2) to the stretcher (3) tting them together
and repeat for the other leg (2). Insert a grub screw (B)
into a hole and use the allen key (F) to tighten. Repeat
for the remaining grub screws (B).
B x 4
F x 1
F
F

Step 3 Align the structure formed in Step 2 to the underside
of the table top (1). Fit a lock washer (E) to a bolt (C)
followed by a at washer (D) and screw into a hole,
using the allen key (G) to tighten into place. Repeat for
the remaining bolts (C).
Step 4 Gently lift the table and place upright on a level surface.
Enjoy your new dining table!
C x 8
D x 8
E x 8
G x 1
G