BROSA The Assistant Standing Mirror User manual

ASSEMBLY GUIDE
e Assistant Standing Mirror
v1.0

Components
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit www.brosa.com.au/pages/product-return-and-parts-request
and we’ll sort it out right away.
Back Legs x 1
Front Legs x 1
Shelf x 1
Mirror x 1
Hardware
What you need
B x 10 (Flat Washer)
(Spec: M6)
C x 10 (Spring Washer)
(Spec: M6)
A x 10 (Bolt)
(Spec: M6x35)
D x 1 (Allen Key)

Step 1
B
C
A
D
A x 3
B x 3
C x 3
D x 1
Align the shelf to the front legs so that the bolt holes
are overlaping. Fit a spring washer (C) then a at
washer (B) to a bolt (A) and tighten into the holes
using the allen key (D).

Step 2
B
C
A
D
A x 4
B x 4
C x 4
D x 1
Align the mirror to the front legs so that the bolt holes
are overlaping. Fit a spring washer (C) then a at
washer (B) to a bolt (A) and tighten into the holes
using the allen key (D).

Step 3
B
C
A
D
A x 3
B x 3
C x 3
D x 1
Align the back legs to the front legs so that the bolt
holes are overlaping. Fit a spring washer (C) then a at
washer (B) to a bolt (A) and tighten into the holes
using the allen key (D).

Step 4 With another person, lift the mirror o the ground
and place it upright on a level surface.
Enjoy your new mirror!