BROSA Junior Kids Cabin Bed User manual

ASSEMBLY GUIDE
Junior Kids Cabin Bed
v1.0

Head End x 1
Short Side Rail x 1
Upper Side Rail x 1
Lower
Side
Rail x 1
Bed Base x 1
Ladder x 1
Foot End x 1
Hardware
B x 10
(Long Bolt)
(M6x60mm)
C x 10
(Cross Dowel)
(10x12mm)
E x 1
(Allen Key)
D x 16
(Screw)
(3.5x30mm)
Components
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit www.brosa.com.au/pages/product-return-and-parts-request
and we’ll sort it out right away.
What you need
A x 3
(Short Bolt)
(M6x35mm)

Step 1 Align the ladder to the head end so that the bolt
holes are ovelaping. Insert the short bolts (A) through
the holes and tighten with the allen key (E).
A x 3
E x 1
A
E

Step 2 Insert the cross dowels (C) into the three side rails
lining up the threaded holes horizontally.
Attach the three side rails to the head end using the
dowels that are attached to the side rails.
Insert the long bolts (B) through the head end into
the three side rails and tighten with the Allen key (E).
B x 5
C x 5
E x 1
C
B
E

Step 3 Insert the cross dowels (C) into the three side rails
lining up the threaded holes horizontally.
Attach the three side rails to the foot end using the
dowels that are attached to the side rails.
Insert the long bolts (B) through the foot end into the
three side rails and tighten with the Allen key (E).
B x 5
C x 5
E x 1
C
B
E

Step 4 Place the bed base (G) inside the frame, onto the
support rails. Insert the screws (D) into the holes
and tighten with a screwdriver.
D
D x 4

Step 5 Make sure that all xtures are tightened and enjoy
your new bed!