BROSA Kaneko Dining Table User manual

ASSEMBLY GUIDE
Kaneko Dining Table
v1.0

Components
Upon unpacking your table from it’s delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new table.
A x 4
(Cross Dowel)
B x 8
(Threaded Rod)
C x 8
(Flat Washer)
D x 8
(Lock Washer)
E x 8
(Hex Nut)
F x 1
(Spanner)
Hardware
What you need
Leg x 4Table top x 1

Step 1 Insert the cross dowel (A) into the top hole of the leg
so that the mark faces the bolt hole. Repeat for all
four legs.
Step 2 Screw two threaded bolts (B) into the corner holes.
Repeat for all four legs.
A x 4
B x 8
A
B
B

Step 3 Place the table top on a at surface with underside
facing up. Fit a leg into a corner with the rod pro-
truding from the metal connector. Fit a washer (C), a
lock washer (D) then a hex nut (E) to the threaded
rod and tighten with the spanner (F). Repeat to
secure the second rod. Repeat for the remaining legs.
C x 8
D x 8
E x 8
F x 1
CD
EF

Step 4 Place the table on a at surface and enjoy your new
table!