BROSA Peggy Clothes Rack User manual

ASSEMBLY GUIDE
Peggy Clothes Rack
v2.0

Components
Upon unpacking your clothes rack from it’s delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new clothes rack.
Hardware
What you need
A x 2 B x 4 C x 4 D x 4 E x 1
3
4
5
(M6 x 40) (M6 x 35)
Short pole x 2
Ear x 2
Leg x 4
Strap x 1
Long pole x 1
1
2

Step 1 Grab a short pole and screw the rods into the holes
on both ends of the pole.
Step 2 Align the legs (4) with the structure formed in Step 1.
Fit the legs into the rods, making sure the holes on
lower ends are facing the correct direction as the
Bird’s Eye View indicates. Align the ears (3) with the
rods on each side and then screw them till tight.
A x 2
A1
4
4
Bird’s Eye View
3

Step 3 Use the strap (5) to combine the other two poles (2)
(1).
Step 4 Align the structure formed in Step 3 with the struc-
ture formed in Step 2, making sure the long pole (2)
is aligned with the outer legs and the short pole (1)
aligned with the inner legs.
Fit a spring washer (C) to a bolt (B) followed by a at
washer (D) and insert it into a hole on the leg. Tight-
en the bolt using the allen key (E). Repeat for the
remaining holes.
1
2
B x 4
C x 4
D x 4
E x 1
B
C
D
E
1
2
5

Step 5 Place the formed structure on a level surface and
then enjoy your new clothes rack!