BROSA Enzo Small Bookcase User manual

ASSEMBLY GUIDE
Enzo Small Bookcase
v1.0

Components
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit
www.brosa.com.au/pages/product-return-and-parts-request and we’ll sort it
out right away.
Hardware
What you need
B x 8 C x 8A x 8 D x 28 E x 1
1
2
3
5
5
5
6
7
4

Step 1 Insert the wooden dowels (A) into the inner holes on
the sideboards (2) (3).
A x 8
A
2
3

Step 2 Align the sideboard (3) with the base board (6) and
top board (1). Fit them together with the wooden
dowels. Fit a washer (C) to a bolt (B) and insert the
bolt into the hole on the inner side of the top and
bottom boards. Fasten the bolt with the Allen key
(E). Repeat this for the remaining holes.
B x 4
C x 4
B
E
C
3
1
6
E x 1

Step 3 Repeat Step 2 for the other sideboard (2).
B x 4
C x 4
E x 1
2
B
E
C

Step 4 Flip the structure formed in Step 3 and put it upright
on a level surface. Fit the back panel (4) into the
formed space on the back of the body and secure it
in place using the screws (D) and a Phillips screw-
driver.
D x 22
4
D

Step 5 Incline the shelves (5) to t them into the inner
space of the body and then place them upon the rails
of the side boards.
5
5
5

Step 6 Lift the upper case formed in Step 5 and put it on
top of the lower case (7). Rotate the metal plate on
the back of the lower case so that it covers the upper
case. Fit screws (D) into the remaining holes on the
plate and tighten them with a Phillips screwdriver.
Repeat this for the other metal plate.
D x 6
D
7

Step 7 Pull the handle to use the hidden panel.
Enjoy your new bookcase!