Burg sPinLock 410 User manual

www.burg.de
sPinLock 410
Operating Manual

sPinLock 410 | 11-22 Rev. 02 | English | 2
Introduction 2
General 2
Default settings 3
Technical data 3
Scope of delivery 3
Optional accessories 3
Features 3
Dimensions 3
Mounting hole dimensions 3
Funktional description 4
Configuration 4
Operation 5
Contact 5
Content
The sPinLock410 is the mechanical code lock with masterkey
function for emergency opening. It can be conveniently used in
both wooden and steel furniture.
Due to its simple operation, the lock facilitates everyday life and
shines with its high-quality design and ergonomic handling.
Thanks to its easy retrofitting, the lock can be easily adapted to
any installation situation.
Important: Please note all warnings and read through the
entire operating manual before you begin configuration.
Introduction
The latest version of this guide is available at:
www.burg.de
General
sPinLock 410
Arelease button Bhousing
Cguide line Dopening for masterkey
Esetting screw
D
A
B
C
E

sPinLock 410 | 11-22 Rev. 02 | English | 3
sPinLock 410
32 mm
11 mm
(max.)
19 mm
58,4 mm
20 mm
Ø 56,3 mm
16
56,3
19
20
1
58,4
32
max. 11
Scope of Delivery
can be used in wooden and metal doors (indoors)
ergonomic rotary knob and high-quality zamak housing
simple operation and assembly
emergency openig via master key
up to 9,999 possible number combinations
Features
Dimension Ø 56.3 x 32 mm
Mode Private Mode
Material Housing: Zamak
Mounting socket: Zamak
Cam: steel (nickel-plated)
Mounting dimension 16 mm x 19 mm
Lock attachment M19 nut
Cam attachment Screw (torx)
Locking direction Left (90°), door hinge: DIN right
Cam type B
Max. door thickness 11 mm
Number wheels 4
Code combinations 9,999
Master Key function Yes
Factsheet
Technical Data
Optional Accessories
Alocking system BM19 nut
Ccam fixing screw Dcam, type B
Master Key (W-SLM-02)
anti-twist protection & mounting bezel (W-MSZ-01)
Dimensions
D
B
Mounting Hole Dimensions
16 mm
Ø 19 mm
A
C
Ø 56,3 mm
Default Settings
Code 0-0-0-0

sPinLock 410 | 11-22 Rev. 02 | English | 4
Mode: Fixed Assigned Authorization (Private Mode)
In this mode a code is pre-set with which the lock can be opera-
ted. This mode is suitable for user groups where user rights do
not have to change permanently, e.g. in an office cabinet.
Master Key
The lock can be unlocked via the Master Key in case the code is
lost.
Note: The Master Key is not included in the scope of delivery. If
required, it can be ordered separately.
Functional Description
Configuration
1Set the Code
1. Unlock the lock with the valid code (default: 0-0-0-0). Turn
the setting screw 90° to the right using a screwdriver.
2. Carefully turn the number wheels one after the other until
they engage (from top to bottom / from left to right). Do not
move to the next number wheel until the previous number
wheel has engaged. When all number wheels have engaged,
the valid code can be read off.
2Code Finding and Master Key Opening
The Master Key can be used to read the valid code and unlock
the lock.
1. Insert the Master Key into the keyhole and turn it 90°
to the left.
2. While the Master Key remains in this position, carefully
pull off the number wheel housing to the left.
3. Turn the setting screw back to the initial position.
3. Insert a pin on the back of the number wheel housing
as far as possible into the first opening from the left. Turn the
number wheel from the front until it engages. Repeat the
procedure for all number wheels. Once all the number wheels
have engaged, the valid code can be read off.
4. Remove the pin and carefully slide the number wheel housing
back onto the lock until it engages. Turn the Master Key back
to its original position and pull it off.
sPinLock 410
90° R 90° L
90° L
90°L
90°R
123 4
sPinLock 410
90° R 90° L
90° L
90°L
90°R 123 4
sPinLock 410
90° R 90° L
90° L
90°L
90°R 123 4
sPinLock 410
90° R 90° L
90° L
90°L
90°R 123 4
sPinLock 410
90° R 90° L
90° L
90°L
90°R 123 4
sPinLock 410
90° R 90° L
90° L
90°L
90°R
123 4
sPinLock 410
90° R 90° L
90° L
90°L
90°R 123 4

sPinLock 410 | 11-22 Rev. 02 | English | 5
Image rights: cover, metal structure, BURG F.W. Lüling KG
Contact
BURG F.W. Lüling KG
Volmarsteiner Str. 52
58089 Hagen (Germany)
[phone]
[e-mail]
www.burg.de
Operation
1Unlock
1. Set the valid code using the number wheels.
2. Press the release button and hold it. Turn the lock 90°
to the right. The lock is now unlocked.
2Lock
1. Turn the lock back to the initial position.
2. Turn the number wheels to lock the lock. In this state the
release button cannot be pressed and the lock cannot be
unlocked.
sPinLock 410
90° R 90° L
90° L
90°L
90°R 123 4
sPinLock 410
90° R 90° L
90° L
90°L
90°R 123 4
sPinLock 410
90° R 90° L
90° L
90°L
90°R 123 4
sPinLock 410
90° R 90° L
90° L
90°L
90°R 123 4