Burg Combipad User manual

www.burg.de
Combipad
Operating Manual

Combipad | 03-2020 Rev. 01 | English | 2
Introduction 2
General 2
Technical data 3
Default settings 3
Scope of delivery 3
Features 3
Dimensions 4
Mounting dimensions 4
Functional description 5
Funktional description RTC 5
Assembly instructions 6
Configuration 7
Operation 8
Batterie replacement 8
Disposal 8
Content
Dear Customer,
Thank you for choosing the Combipad - the high-quality
electronic combination slam-latch lock that sets standards for
securely protecting valuables indoors.
Thanks to its simple operation, this lock not only makes every-
day life easier, but also stands out for its high-quality design,
the robust and fireproof stainless steel keys, and the ergonomic
turning knob.
Important: Please note all warnings and read through the
entire operating manual before you begin configuration.
We hope you enjoy using your new locking system.
Sincerely, BURG F.W. Lüling KG
Introduction
The latest version of this guide is always available at:
www.burg.de
General
Combipad
ATurning knob BTouchpad buttons
CStatus LED DEmergency power socket
A B
C
ABattery compartment screw BLatch1
CBattery compartment DFixing frame
A
C
1 With the Combipad Left version, the latch is located on the opposite side.
B
D
D

Combipad | 03-2020 Rev. 01 | English | 3
2 lithium batteries 3V, CR123A (inserted)3
fixing frame
4 fixing screws
Scope of Delivery
High-quality metal housing (Zamak) with stainless steel keys
Can be used in doors made of wood and metal
Door locks when pushed (latch system)
Long battery life (60,000 locking cycles)
LED locking indicator
Simple configuration and programming
Available as wirelessly networked version with
B-on-air (EnOcean)
Features
Dimensions Combipad:
96 x 64 x 23 mm
Fixing frame:
98 x 66 x 8,7 mm
Batteries 2 x lithium battery 3V, CR123A
Locking cycles approx. 60,000
Working temperature 0° C to 40° C
No. of code combinations 999,999
Code length 4 or 6 digits
Mode Multi User Mode,
Private Mode
Material Housing:
Zamak (chrome-plated, painted)
Keys:
stainless stell
Latch:
Zamak (chrome-plated, painted)
Locking direction R, L1
Lock attachment Fixing frame,
Screws2
Max. door thickness 8 mm (with CNC milling)
Break-off point 1800 N
Factsheet
Technical Parameters
General code Customer-specific
Master code 934716 (1763941)
Mode Multi User Mode
Code length 4 digits
Locking Manually
LED locking indication On
Code confirmation Off
Default Settings
1 Combipad Left version
2suitable for metal doors
3depending on contract an air freight restrictions

Combipad | 03-2020 Rev. 01 | English | 4
Dimensions
13 mm
64 mm
96 mm
25 mm
Ø 34 mm
3 mm
53 mm
58 mm
85 mm
91 mm
33 mm
26 mm
1,5 mm
13,5 mm
7,7 mm
Combipad
Gehäuse
13 mm
64 mm
96 mm
25 mm
Ø 34 mm
3 mm
53 mm
58 mm
85 mm
91 mm
33 mm
26 mm
1,5 mm
13,5 mm
7,7 mm
Combipad
Gehäuse
13 mm
64 mm
96 mm
25 mm
Ø 34 mm
3 mm
53 mm
58 mm
85 mm
91 mm
33 mm
26 mm
1,5 mm
13,5 mm
7,7 mm
Combipad
Gehäuse
Combipad Fixing Frame
Mounting Hole Dimensions
66 mm
98 mm
66 mm
8,7 mm
91,2 mm
59,2 mm
Combipad
Befestigungsrahmen
Einbaulochung
66 mm
98 mm
66 mm
8,7 mm
91,2 mm
59,2 mm
Combipad
Befestigungsrahmen
Einbaulochung
66 mm
98 mm
66 mm
8,7 mm
91,2 mm
59,2 mm
Combipad
Befestigungsrahmen
Einbaulochung
The mounting hole applies to both steel and wooden doors.
When installing in wooden doors, please note that a two-stage
recess must be milled. The milling on the outside of the door
corresponds to the dimensions of the mounting hole, the milling
on the inside of the door corresponds to the dimensions of the
fixing frame.
Mounting Hole

Combipad | 03-2020 Rev. 01 | English | 5
Block Mode
After 3 failed opening attempts, the lock blocks for 45 seconds
so that no code can be entered in the meantime. The locking
time is indicated by the red LED flashing every second. The block
mode can be cancelled by entering the Master Code.
Master Code
The Master Code authorizes the programming of the lock. The
lock can also be opened via the Master Code if the code is lost.
In Multi User Mode, the code used for locking is deleted after
entering the Master Code.
Note: For your own safety please program your own
Master Code prior to use.
Mode: Fixed Assigned Authorization (Private Mode)
In this mode, a code is pre-set with which the lock can be ope-
rated. This mode is suitable for user groups where user rights
do not have to change permanently, e.g. in an office cabinet. To
close, the user enters a stored code. The lock is opened by ent-
ering this or another stored code. Up to 50 codes can be stored.
A code that has not been stored is rejected by the lock.
Mode: Multi User Authorization (Multi User Mode)
This mode is suitable for constantly changing users who only use
the compartment temporarily or once, e.g. in a sports facility.
Codes are valid for a single locking process and are deleted by
the lock when the compartment is reopened so that a new code
can be used. The locking bolt remains open until a new code
locks the lock again. Before locking, the door must be closed
(slightly pressed). The user enters a code of choice (4 or 6 digits)
to close. The green LED starts flashing. The lock is opened by
entering the same code.
LED Locking Indication
When the locking indication is activated, the red LED flashes
every second when the lock is locked. When the lock is open,
the LED does not flash. This function can be switched on or off.
Code Confirmation
To close the lock, a double code entry is required, with the se-
cond entry cornfirming the first entry. The lock does not lock un-
til the entry has been repeated. The second entry is made after
the green LED flashes briefly. A simple code entry is sufficient to
open the lock. This function can only be set in Multi User Mode.
Automatic Locking
After opening, the lock locks automatically after 3 seconds. This
function can only be set in Private Mode. The door does not
have to be closed for this. The latch system allows the door to
be closed by pressing lightly even when the lock is locked. This
function can be switched on or off.
Battery Warning
If the battery capacity falls below a certain limit, the red LED
lights up for three seconds after the code has been entered. If
the critical level is reached, the lock can no longer be locked or
can only be opened with Master Code.
Note: We recommend to change the batteries after the first
warning.
Functional Description
The Combipad RTC has a software real-time clock. This real time
clock enables the programming of certain actions at a defined
time.
Automatic Locking and Unlocking
The lock automatically locks or unlocks at a defined time. These
times can be set separately for each weekday. This is done ex
works or by the BURG service on site.
Time Window Usage
The Time Window Usage is the period during which the lock
can be operated. No operation is possible outside of this time
window. If the lock is still locked, it cannot be opened until the
next Time Window Usage has started. The times can be set
separately for each weekday.
Locking Duration
The locking duration determines how long a lock should remain
closed after the closing process. When this period ends, the lock
opens automatically. The duration can be set separately for each
weekday.
Note: The desired functions must already be specified with the
defined time specifications when ordering. BURG programs
these already during production.
Functional Description RTC

Combipad | 03-2020 Rev. 01 | English | 6
Assembly Instructions
Prepare the appropriate mounting hole on your furniture
according to the installation drawing (page 4). Note the
adapted two-step recess for the fixing frame for fronts
made of wood and HPL. This recess is not required for
metal fronts or acrylic glass.
Note: If you need a template (step file) for CNC milling,
punching or laser cutting, please contact your contact
person at BURG.
Place the fixing frame in the mounting hole on the inside
of the door and hold it in place.
Insert the lock body into the mounting hole from the out-
side of the door, bolt first. Check that the lock lies flush
and tight on the outside of the door.
Screw the fixing frame to the lock body via the four screw
holes (hand-tight, max. 2 Nm). Please note the required
screw length. This depends on the door thickness in which
the lock is installed.
Make sure that the bolt is sufficiently secured (approx. 5
mm) to a strike plate or rebate when closed. When closing
the locking system, the bolt should fall easily into its end
position without pressure.
Tip: An adaptable strike plate can be used to set an opti-
mal closing position. Please contact your contact person at
BURG.
1
2
3
4

Combipad | 03-2020 Rev. 01 | English | 7
Configuration
Each step of a configuration is completed by the green LED flas-
hing twice. It is absolutely necessary to start the next confi-
guration step only after the green LED has flashed twice.
If the configuration step is not carried out correctly, the lock
signals this by flashing the red LED 8 times in quick succession.
Important: For the configuration of the Combipad Left version,
please note only the numbers written in brackets.
1Select Mode
a) Private Mode
Enter Master Code  1 (9) Master Code
Set mode  5 (5) 0 (0) 
Note: To assign the private codes, please go to point
3a „Set the code“.
b) Multi User Mode
Enter Master Code  1 (9) Master Code
Set mode  5 (5) 1 (9) 
Note: After changing the mode, all functions are reset to the de-
fault settings. This does not apply to the Master Code.
2Set the Code Length
Enter Master Code  1 (9) Master Code
Select number of digits  0 (0) x 
4 digits: x = 4 (6)
6 digits: x = 6 (4)
Note: After changing the number of digits, all codes stored in
Private Mode are deleted.
3Set Functions
Depending on the mode, certain functions are available for
configuration. Set the functions assigned to the mode according
to your requirements.
a) Configuration in Private Mode
Set the code
Enter Master Code  1 (9) Master Code
Set code  3 (7) xxxx (xx)
Up to 50 private codes can be stored. Depending on the set
code length, these must be 4 or 6 digits long.
Delete the code
Enter Master Code  1 (9) Master Code
Delete code  9 (1) xxxx (xx)
Enter the code you want to delete.
Automatic locking
Enter Master Code  1 (9) Master Code
Activate  6 (4) 1 (9) 
Deactivate  6 (4) 0 (0) 
b) Configuration in Multi User Mode
Code confirmation
Enter Master Code  1 (9) Master Code
Activate  2 (8) 1 (9) 
Deactivate  2 (8) 0 (0)
c) Set General Functions
Set own Master Code
Enter current Master Code  1 (9) Master Code
Enter new Master Code  7 (3) xxx xxx 
Note: The Master Code must be 6 digits long.
LED locking indication
Enter Master Code  1 (9) Master Code
Activate  8 (2) 1 (9) 
Deactivate  8 (2) 0 (0) 
4Reset to Default Settings
Enter General Code  4 (6) General Code

Combipad | 03-2020 Rev. 01 | English | 8
Electrical and electronic equipment („old devices“) as well as bat-
teries and accumulators may not be disposed of with household
waste. For proper disposal, these devices must be brought to a
designated collection point.
Every consumer is legally obliged to dispose of batteries or
rechargeable batteries or devices, which are operated with
batteries or rechargeable batteries separately from the house-
hold waste, as they contain pollutants and valuable resources.
Disposal may take place at an approved collection point. This can
be, for example, a local recycling center. Old electrical appliances,
batteries or rechargeable batteries are accepted there free of
charge and used for environmentally beep and resource-efficient
recycling.
You can also return your old electrical appliances or used batteries
to us. The return must be done in each case sufficiently franked:
BURG F.W. Lüling KG
Volmarsteiner Straße 52
58089 Hagen
On batteries containing harmful substances you will find infor-
mation in the form of abbreviations on the ingredients cadmium
(Cd), mercury (Hg) and lead (Pb). Batteries are marked with the
following symbol, which means that they must not be disposed
of with household waste:
BURG F.W. Lüling KG
Hegestraße 6
58300 Wetter (Germany)
Fon +49 (0)23 35/ 6308-0
Fax [phone]
[e-mail]
www.burg.de
Disposal
Battery Replacement
1Loosen the battery compartment cover screw on the
back (illustration on page 2).
2Remove the battery compartment cover.
3Remove the batteries.
4Insert new batteries according to +/- icons.
5Close the battery compartment cover with the screw.
Image rights: cover image, metal structure, BURG F.W. Lüling KG
Operation
1Operation in Private Mode
Lock Enter code
Unlock Enter code
2Operation in Multi User Mode
Lock Enter code
Unlock Enter code
Note: If the code confirmation is set, the PIN must be entered
twice when closing.
3Entering the Master Code
Enter Master Code  1 (9) Master Code 
Note: The master code can be used for opening the lock.
When unlocking in Multi User Mode by the Master Code, the
code used for locking is deleted after entering the Master Code.