Burg sPinLock 510 User manual

www.burg.de
sPinLock 510
Operating Manual

sPinLock 510 | 01-2022 Rev. 01 | English | 2
Introduction 2
General 2
Technical data 3
Scope of delivery 3
Optional accessories 3
Features 3
Functional description 3
Dimensions 3
Mounting hole dimensions 4
Configuration 4
Operation 4
Contact 4
Dear customers,
thank you for choosing the sPinLock 510 - the numeric code
lock for various applications in the furniture sector.
The sPinLock 510 can be installed quickly. It makes everyday life
easier with its operating method. Its added value comes primar-
ily from its compact design and the possibility of setting up to
9,999 different number combinations.
Important: Please note all warnings and read through the
entire operating manual before you begin configuration.
We hope you enjoy using your new locking system.
Your BURG-Team
Introduction
The latest version of this guide is available at:
www.burg.de
General
sPinLock 510
AKnob BOpening for master key
CLock icon DNumber wheel
EGuide line FAdjustment pin
GKey HRotor
E
A
D
C
B
F
G
H
A
B
Content

sPinLock 510 | 01-2022 Rev. 01 | English | 3
simple assembly and operation
ergonomic rotary knob
Emergency opening and code finding by master key
9,999 possible number combinations
Features
Dimension 24,5 x 25,3 x 72,8 mm
Material Housing: plastic (black)
Rotor: Zamak
Latch: steel (nickel plated)
Mode Private Mode
Number wheels 4
No. of code combinations 9,999
Locking direction 90° R, LAD, (L*)
Mounting hole 68 mm x 23 mm
Lock attachment Screw-on plate / frame
Latch attachment snap ring
Max. door thickness Steel: 0,7 mm to 4 mm
Wood: 12 mm to 19 mm
Latch type B
Code (default) 0-0-0-0
Factsheet
Optional Accessories
master key
latch type B1
(Latch overview under www.burg.de/downloads)
Dimensions
Front view Back view
Scope of Delivery
1x locking system sPinLock 510
1x knob attachment
1x snap ring for cam assembly
1x clamping spring (steel)
1x retaining frame for steel
1x retaining frame for wood
5x fixing screws
Mode: Fixed Assigned Authorization (Private Mode)
In this mode, a code is preset with which the lock can be
operated. This mode is suitable for user groups where the user
rights do not need to change on a regular basis, e.g. in an office
cabinet.
Master key
The master key can be used to read the valid code and open the
lock.
Note: The master key is not included in the scope of delivery and
can be ordered separately.
Functional Description
Technical Data
72,8 mm
25,3 mm
23,8 mm 14,5 mm
*also available: left
1Depends on order. Latches may be included in the scope of delivery
(e.g. of a set). The exact scope of delivery can be taken from the order
and the product description.

sPinLock 510 | 01-2022 Rev. 01 | English | 4
Image rights: cover image, metal structure, BURG F.W. Lüling KG
Contact
BURG F.W. Lüling KG
Volmarsteiner Str. 52
58089 Hagen (Germany)
+49 (0)23 35. 63 08-0
[e-mail]
www.burg.de
Configuration
1Set the code
1. Use the number wheels to set the valid code (factory
setting 0-0-0-0) along the guide line.
2. Turn the knob by 90° to the right (clockwise) so that
the arrow points to the green (open) lock symbol.
The lock is unlocked.
3. Move the adjustment pin on the back of the lock from
position Ato position B.
4. Use the number wheels to set the new code.
5. Move the adjustment pin on the back of the lock back
to position A.
Note: Step 2 applies to the right variant. For the left
variant, the knob must be turned 90° to the left (counter-
clockwise).
2Code finding and emergency opening
1. Insert the master key into the cylinder opening.
2. Turn cylinder 90° to the right (clockwise).
The lock is unlocked.
3. Press one of the four keys on the back
of the lock.
4. Turn the opposite number wheel on the front of
the lock until it clicks into place.
5. Repeat the procedure for the other 3 keys and
number wheels. It is recommended to press the
keys one after the other from right to left.
7. The valid code is set.
Note: Step 2 applies to the right variant. For the left
variant, the knob must be turned 90° to the left (counterc-
lockwise).
Operation
1Unlock
1. Use the number wheels to set the valid code (factory
setting 0-0-0-0) along the guide line.
2. Turn the knob by 90° to the right (clockwise) so that
the arrow points to the green (open) lock symbol.
The lock is unlocked.
Note: Step 2 applies to the right variant. For the left
variant, the knob must be turned 90° to the left (counter-
clockwise).
2Lock
1. Turn the knob by 90° to the left (counterclockwise) so
that the arrow points to the red (locked) lock symbol.
2. Adjust the number wheels. The lock is locked.
Note: Step 1 applies to the right variant. For the left vari-
ant, the knob must be turned 90° to the right (clockwise).
Mounting Hole Dimensions
23 mm
68 mm