Degelman Pro-till 20 User manual

AConnect Hydraulics
DEPTH
WINGS
TRANSPORT
JACK
3
4
2
14
1
3
2
FLOAT
FLOAT
3 3
4
22
1
11
1
* Refer to operators manual for
complete safety and operation info.
• Hydraulic Connections & Hoses
• Working points & pins
• Hubs & Spindles
• Tire Pressure: 58 PSI (400 kPa)
• Check for missing, worn or
damaged parts.
Maintenance
(Check Machine Daily)
PITCH
ADJUSTMENT
PITCH
ADJUSTMENT
143366 v1.4
QUICK-START GUIDE*
for PRO-TILL 20/26/28
* Refer to operators manual for complete safety and operation info.
T
O
B
E
E
L
I
G
I
B
L
E
F
O
R
Y
O
U
M
U
S
T
R
E
G
I
S
T
E
R
WARRANTY
REMEMBER! You must complete Product
Registration to be eligible for Warranty.
All manuals and user guides at all-guides.com
all-guides.com

BPut in Field Position
iv)
i)
ii)
iii) v)
FMAX Transport Speed: 40 km/h (25 MPH)
DTest. Check. Adjust.
10-12 MPH
100m
ERaise for Headland Turns.
1
CSet Cutting Depth
3
2
(Start with 8stops
per cylinder, test
depth & adjust)
(IMPORTANT: Add depth
stops starting from depth plate end )
22
1”
3
3
Depth Adjustment
(2 Inner Wheel Cylinders)
Typically
Set to 2”
1
Pitch Adjustment
(2 Outer Cylinder
Adjustment Rods)
(Tool Storage Location)
Scraper Position Overview (Rubber Rollers)
Set Gap
distance at
1/4” to 3/8”
from roller surface.
Storage Position
Maintenance
Position
Engaged Position
Remove the 4 bolts to rotate into
or out of “Storage position”,
then re-install.
Loosen the 4 bolts to rotate up into
“Maintenance
Position”
& secure.
Loosen the 4
bolts to rotate
downward.
Set the scraper
clearance
(1/4” to 3/8”).
Properly tighten.
All manuals and user guides at all-guides.com