Dynojet Power Commander 3 User manual

i310-211 2002-2004 Suzuki GSX 1400 - PCIII - 1
2002-2004 Suzuki GSX 1400
Installation Instructions
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 [phone] www.powercommander.com
Parts List
1 Power Commander
1 CD-ROM
1 Installation Guide
1 Power Adapter
2 Power Commander Decals
2 Dynojet Decals
1 Velcro®Strip
1 Alcohol Swab
You can also download the Power Commander software
and latest maps from our web site at:
www.powercommander.com
The ignition MUST be turned OFF before installation!
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

1) Remove the seat.
2) Remove the left hand side over.
3) Disconnect the fuel injector con-
nector shown in Fig. A. This
connector is located on the left
hand side of the bike just behind
the airbox.
4) Plug the connectors from the
Power Commander in line of
these connectors. (Fig. B)
5) Connect the ground wire from
the Power Commander to the
negative side of the battery
(Fig. C).
6) Mount the Power Commander
in the rear trunk area using the
supplied velcro strips.
7) Reinstall the side cover and
the seat.
Fig. AFig. B
Fig. C
i310-211 www.powercommander.com 2002-2004 Suzuki GSX 1400 - PCIII - 2
Unplug this connector
Stock connectors
PCIII connectors
Ground wire from PCIII