Elo TouchSystems 15A2 for wireless card User manual

Revision B
P/N E071795
Installing the CF Card for the 17A2/15A2
2008 Tyco Electronics.
North America
Elo TouchSystems
301 Constitution Drive,
Menlo Park, CA 94025
www.elotouch.com
Europe
Tel [phone]
Fax [phone]
[email protected]
Asia-Pacific
Tel [phone]
Fax [phone]
www.tps.co.jp
Latin America
Tel [phone]
Fax [phone]
www.elotouch.com.ar
Elo Technical Support
:
www.elotouch.com/go/websupport
www.elotouch.com/go/contactsupport
Online self-help
Technical Support contacts in your region:
Replace the back cover insert. Reconnect the power adapter
and power on the touchcomputer.
You may use the operating system
to verify that the CF card is
installed properly.
Insert the CF card into the slot.
If inserted correctly, the black
eject button should click and
come out.
If you have an existing CF card,
press the black eject button to
remove it.
Turn off power to the touchcomputer
and unplug the power adapter from
the unit.
15A2
Replace the back cover insert. Reconnect the power adapter
and power on the touchcomputer.
You may use the operating system
to verify that the CF card is
installed properly.
Insert the CF card into the slot.
If inserted correctly, the black
eject button should click and
come out.
Close the flap and replace the two
screws removed in Step 3.
Remove the two screws attaching
the DVD drive flap and remove the
flap.
If you have an existing CF card,
press the black eject button to
remove it.
Turn off power to the touchcomputer
and unplug the power adapter from
the unit.
17A2
Remove the two screws attaching
the CF door flap and remove the
flap.
Close the flap and replace the two
screws removed in Step 3.
78
56
34
12
78
56
34
12
For current Elo news, product updates and announcements, register to receive our TouchMonitor newsletter
at www.elotouch.com/go/news
821107901002
Carefully place the touchcomputer
facedown on a soft, flat surface.
Turn touchcomputer upside down
and take off the back cover insert.
Carefully place the touchcomputer
facedown on a soft, flat surface.
Turn touchcomputer upside down
and take off the back cover insert.