Elo TouchSystems E-Series User manual

USER MANUAL
Elo Touch Solutions
15.6” Widescreen E-Series RevC All-in-One Touchcomputer
SW602266 Rev A

Copyright © 2014 Elo Touch Solutions, Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language or computer language, in any form or by any means, including, but not
limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of
Elo Touch Solutions, Inc.
Disclaimer
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its
Affiliates (collectively "Elo") makes no representations or warranties with respect to the contents herein,
and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo
reserves the right to revise this publication and to make changes from time to time in the content hereof
without obligation of Elo to notify any person of such revisions or changes.
Trademark Acknowledgments
AccuTouch, CarrollTouch, Elo, Elo (logo), Elo Touch, Elo Touch Solutions, Elo TouchSystems,
IntelliTouch, iTouch, SecureTouch, TouchTools and VuPoint are trademarks of Elo and its Affiliates.
Windows is a trademark of Microsoft Corporation.

Table of Contents
Chapter 1: Setup...................................................................................... 4
Unpacking Your Touchcomputer................................................................................................4
Adjusting the Display....................................................................................................................5
Calibrating the Touchscreen .......................................................................................................6
Additional Extended Cable Cover for Your System.................................................................7
Additional Mounting Option for Your System............................................................................8
Chapter 2: Operation............................................................................... 9
Elo Touch Solutions – E-Series Hardware Monitoring Utility.................................................9
LED Functionality........................................................................................................................10
Accessing the Input/Output Panel............................................................................................11
Setting Up the Operating System.............................................................................................12
Creating the Recovery Flash Drive ..........................................................................................16
Recovering the Operating System ...........................................................................................19
Chapter 3: Safety and Maintenance..................................................... 23
Safety............................................................................................................................................23
Care and Handling......................................................................................................................24
Chapter 4: Technical Support............................................................... 26
Technical Assistance..................................................................................................................26
Chapter 5: REGULATORY INFORMATION .......................................... 27
I.Electrical Safety Information..............................................................................................27
II.Emissions and Immunity Information................................................................................27
III.Agency Certifications...................................................................................................29
IV.China RoHS...................................................................................................................30
Chapter 6: WARRANTY INFORMATION............................................... 31

User Guide – E-Series AiO Touchcomputer
SW602266 Rev A, Page 4of 32
C H A P T E R
1
SETUP
This chapter discusses how to set up and test your touchcomputer.
Unpacking Your Touchcomputer
Check that the following items are present and in good condition:
Touchcomputer Power cable US/Canada Power cable Europe
Quick Install Guide Power Adapter
Extended Cable Cover

User Guide – E-Series AiO Touchcomputer
SW602266 Rev A, Page 5of 32
Adjusting the Display
The display screen can be adjusted from -17 to +75 degrees, as shown below.
CAUTION: To prevent tipping or dropping, be sure to hold the base when
adjusting the display.
17°
75°
-17°+75°

User Guide – E-Series AiO Touchcomputer
SW602266 Rev A, Page 6of 32
Calibrating the Touchscreen
The touchscreen is pre-calibrated for accurate touch response.
If for any reason the touchscreen needs to be recalibrated, please double-click
the EloConfig shortcut on the system desktop (for Windows 7 & 8.1) and then
click “Calibrate Touch Screens”.
This launches the calibration program. The window shown below opens. Follow
the instructions to calibrate the touchscreen.

User Guide – E-Series AiO Touchcomputer
SW602266 Rev A, Page 7of 32
Additional Extended Cable Cover for Your System
E-Series RevC provides an additional extended cable cover in the accessory box.
You may need to replace the original cable cover to the extended cable cover if
most of I/O ports have been connected.

User Guide – E-Series AiO Touchcomputer
SW602266 Rev A, Page 8of 32
Additional Mounting Option for Your System
1) Mounting on the wall
2) Second monitor mount onto your system (any monitor under 2.5 Kg with 75mm
VESA mount)
REMOVE SCREWS TO
REMOVE FOOT PLATE

User Guide – E-Series AiO Touchcomputer
SW602266 Rev A, Page 9of 32
C H A P T E R
2
OPERATION
This chapter describes how to interact with the Elo Touch Solutions diagnostic
tool, power LED, and input/output panel.
Elo Touch Solutions – E-Series Hardware Monitoring Utility
E-Series Hardware Monitor Menu

User Guide – E-Series AiO Touchcomputer
SW602266 Rev A, Page 10 of 32
The Hardware Monitor tool provides the following features.
Feature Description
System Display the BIOS version, operating system version, Hardware
Control (Volume & Brightness), memory information, and drive
information.
Hardware
Monitor Monitor the CPU temperature, system temperature, and system output voltages.
Setting Set alarms when the CPU temperature, system temperature, and
output voltages that meet the setting criterion.
Alarm Display the record of all alarms.
About General information for the E-Series diagnostic tool.
LED Functionality
The E-Series base has a LED indicating the state of the touchcomputer. The
table below shows LED state and corresponding color.
LED Color to Observer State
Off No input power — Off mode
Red Input power present – Off or Hibernation mode
Orange Input power present — Standby mode S3
Green Input power present — Power on