Elo TouchSystems Aegis Series User manual

Aegis
Series

Aegis – Series
1
TABLE OF CONTENTS
Features 3
Specifications 4
Physical Diagrams 5
What comes with Aegis 7
SwitchandControls 8
OSDSettings 9
Installation 19
External Power Adapter 21
MCR Installation 22
MCR Parameter Modification 25
VFD Customer Display Installation 27
Trouble Shooting 32

Aegis – Series
2
The information in this document is subject to change without prior notice in
order to improve reliability, design and function and does not represent a
commitment on the part of the manufacturer. In no event will the manufacturer
be liable for direct, indirect, special, incidental, or consequential damages
arising out of the use or inability to use the product or documentation, even if
advised of the possibility of such damages.
MonitorMice is a registered trademark of Elo Touchsystems

Aegis – Series
3
FEATURES
¾Cast aluminium front and base construction - rugged and durable
¾Compact size and small footprint - fits where space is at a premium
¾Standard VGA for easy interface to a standard PC VGA port.
¾Flicker-free LCD display - easy on the eyes
¾Low radiation - poses less hazard to user’s health
¾Power-thrift - environmentally friendly
¾Tiltable display - adapts to placement, user position and lighting
conditions
¾VESA mounting holes - fits optional tilt/swivel wall mount fixtures
¾Flexible power options - tap power from the computer or use an
external adapter
¾Point of sales industry specific options - touch screen, VFD customer
display, magnetic card reader

Aegis – Series
4
SPECIFICATIONS
Model A152TA A121TA A122TA
Display Panel
Type TFT LCD TFT LCD TFT LCD
Display Area 15.00” 12.1” 12.1”
Display Resolution 1024 x 768 XGA 800X600 800X600
Colour Resolution 262,144 16.7M 16.7M
Pixel Pitch 0.297x 0.297 0.306X0.306 0.306X0.306
Brightness 350 nits (typ) 150 nits (typ) 300 nits (typ)
Contrast Radio 400:1 (typ) 150:1 (typ) 200:1 (typ)
Response time 16ms 40ms 20ms
Interfaces
cables & connectors Standard VGA for use with a Video
Graphic Adapter
Model specific options:-
PS/2 for MCR & 32 Keyboard,
RS232 for touch screen, DC
power.
Energy Saving Mode VESA DPMS compliant
Power Supply A152TA=12v @ 4A and A12xTA=12v @2A
Weight A152TA=6.4 kg and A12xTA= 5.5 Kg
Please note that the “x” denotes model specific options, e.g. A121TA standard
brightness and A122TA is high brightness.
The “T” means with Touch Screen, and the “A” stands for Analog.
For Model A12xTA, it is recommended to use 800X600 @ 60Hz for display
adapter settings. For Model A152TA, it is recommended to use 1024x768 @
60-75Hz for display adapter settings. Other resolutions would function, but
possibly at degraded display quality.

Aegis – Series
5
PHYSICAL DIAGRAMS
A12xTA
A
152TA

Aegis – Series
6

Aegis – Series
7
WHAT COMES WITH AEGIS
Upon unpacking, please inspect to make sure all items are in place and in
good condition. If there is any damaged or missing item, please contact your
dealer immediately.
The following items come as standard
1. LCD Display unit with tilt base
2. Power bracket
3. DC power cable 9000XC1594
4. User’s manual
5. Driver CD for Elo touch screen
Aegis

Aegis – Series
8
SWITCH AND CONTROLS
Model A152TA / A12xTA has built-in OSD (on screen display) controls to
adjust various display parameters. The control buttons are located on the
bottom of the back cover.
OSD Controls

Aegis – Series
9
OSD SETTINGS
There are four buttons on OSD panel: Menu / Enter, Right, Left and LCD
ON/OFF. The functions of these four buttons are as follows
Menu/Enter Button
Press it to open OSD window and enter user mode to do the
function adjustment or selection of the item. It may have many levels
in one item. As you select this kind of item, you will enter the next
level and see the sub-items.
Right Button
Press it to Scroll item Right or to decrease the value or to switch the
selected item to another.
.
Left Button
Press it to Scroll item Left or to increase the value or to switch the
selected item to another.
).
LCD ON/OFF Button
Control LCD ON/OFF button

Aegis – Series
10
OSD Menu Structure
Main Menu
If push the “ MENU” key the screen will appear this main menu page, you
can use the “UP” or “ADJ. +” AND “Down” or “ADJ. –“ key ( appear Pic1 )
to select the function you need.
Pic1
The end of this page will be shown the working resolution and frequency.
A.Auto Adjust
If select this function on OSD MAIN MENU and push the MENU key.
( appear Pic2 )
In this function, that will be activated the auto adjusting for the
picture.
Auto Adjust
Pic2

Aegis – Series
11
B..BRIGHTNESS
If select BRIGHTNESS function on OSD MAIN MENU and push the
MENU key.
( appear Pic3 )
You can push ADJ+ or ADJ- key to increase or decrease backlight
current of the inverter.
Pic3
C. CONTRAST
If select CONTRAST function on OSD MAIN MENU and push the
MENU key. ( appear Pic4 )
You can push ADJ+ or ADJ- key to increase or decrease video gain of
the picture.
Pic4

Aegis – Series
12
D. Screen Settings
If select DISPLAY ADJUST function on OSD MAIN MENU and push
the MENU key.
In this mode, that will into the sub-page ( appear Pic5 ) to adjust
display’s function of the picture.
Pic5
D-1 H-POSTION
In this function, than could adjust the picture in horizontal position.
D-2 V-POSITION
In this function, than could adjust the picture in vertical position.

Aegis – Series
13
D-3 CLOCK
In this function, than could adjust the clock frequency of the picture.
D-4 PHASE
In this function, than could adjust the clock phase of the picture.
D-5 QUALITY
In this function, than could adjust the scanning filter of the picture.
E. COLOR TEMPERATURE
If You select COLOR TEMPERTURE function on OSD MAIN MENU
and push the MENU key.
In this function, that will into the sub-page ( appear Pic6 ) to adjust the
display

Aegis – Series
14
color of the picture
Pic 6
E-1 : 9300K : In this mode , than could recall the value for the color
temperature of 9300K.
E-2 : 7500K : In this mode , than could recall the value for the color
temperature of 7500K.
E-3 : 6500K : In this mode , than could recall the value for the color
temperature of 6500K.
E-4 : AUTO GAIN : In this mode , than could active the auto white balance
adjusting.
E-5 RED
In this function, than could adjust the red gain in user’s mode of color
temperature.

Aegis – Series
15
E-6 GREEN
In this function, than could adjust the green gain in user’s mode of color
temperature.
E-7 BLUE
In this function, than could adjust the blue gain in user’s mode of color
temperature.
F. LANGUAGE
In this mode, that could into the sub-page ( Pic7 ) to select the language
for display.

Aegis – Series
16
Pic 7
G.OSD DISPLAY
If select OSD DISPLAY function on OSD MAIN MENU and push the
MENU key.
this function will into the sub-page ( Pic8 ) to adjust the display’s
function for OSD.
Pic8
G-1 : OSD H-POS
In this function, than could adjust the horizontal position of OSD display.

Aegis – Series
17
G-2 OSD V-POS
In this function, than could adjust the vertical position of OSD display.
G-3 OSD TIMER
In this function, than could adjust the time of OSD display.
Except “0” is always display.

Aegis – Series
18
G-4 OSD TRANSPARENCY
In this function, than could adjust the transparency of OSD display
H. VGA / DVI INPUT
If select VGA/DVI function on OSD MAIN MENU and push the MENU key.
In this function, that will into the sub-page ( appear Pic9 ) to select input
source.
Pic9
H-1 : ANALOG INPUT : In this mode , than could select the input source from
the VGA.
H-1 : DIGITAL INPUT : In this mode , than could select the input source from
the DVI.

Aegis – Series
19
INSTALLATION
Model A152TA / A12xTA
This model uses a standard VGA interface.
1. Turn off the computer.
2. Put the Aegis on a steady surface.
3. Please refer to Power Adapter section for instruction on using an external
power adapter and skip this step.
For powering from the computer through the Power Bracket:
a. Open the computer case.
b. Secure the Power Bracket to an unused expansion slot bracket
location.
c. Connect the connector on the Power Bracket wire assembly to a
matching one from computer power supply.
d. Close the computer case.
e. Connect the Aegis Power Cable to the connector on the
Power Bracket.
4. Connect the VGA Cable to the VGA port on the computer.
5. For the unit with touch screen function, please connect the Cable and
DSUB9 Connector to a COM port (RS-232C port) on the computer. Please
note which port number it is connected to, this information is required for
touch driver installation.
6. For units with MCR (magnetic card reader) option. Connect the KB
Cable to the PS/2 keyboard port on the computer. If a keyboard is to be
used, plug the connector from your keyboard into the spare female KB
Connector on the Aegis Keyboard Cable.