Elo TouchSystems E 2 Series User manual

Included items:
1x E-Series 2 Touchcomputer
1x Power Cable US/Canada
1x Power Cable Europe
1x 180W Power Adaptor
1x Quick Install Guide
1x Cable Management Kit
Revision A
P/N E377507
www.EloTouch.com
Quick Installation Guide
E-Series 2
Touchcomputer
© 2021 Elo Touch Solutions, Inc. All rights reserved.
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation
of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Elo Touch Solutions, Inc.
Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc..
Americas
Tel [phone]
[email protected]
Europe (EMEA)
Tel [phone]
[email protected]
Asia Pacific
Tel [phone]
[email protected]
Learn more about Elo at EloTouch.com

Please go to www.elotouch.com/support to verify you have the latest
drivers before installing this device.
Connect the power adaptor.
1
Make additional connections from the back of the Touchcomputer.
2
Make additional connections from the bottom of the stand module.
3
Route the cable with cable management kit.
Press the power button to turn on the Touchcomputer.
4