Enabling Devices Laugh & Learn Puppy User manual

For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-TEC-TOYS or 1-800-832-8697
[e-mail]
Laugh & Learn Puppy #8034
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Fun and Interactive!
This cute learning puppy combines learning with musical play! He
teaches body parts, colors, and the alphabet from A to Z through fun
phrases and songs that are activated by pressing the touch picture pad in
front of him. The touch pad is easy to press and makes interactive
learning a simple and fun experience.
Size: 13"H x 9 ½"W x 15" D. Requires 3 AA Batteries.
Operation:
1. Laugh & Learn Puppy requires 3 AA Batteries to operate. Alkaline
batteries must be used (e.g. Duracell or Energizer Brands). Do not use
rechargeable batteries because they supply a lower voltage and the unit
may not perform as well. Never mix old and new batteries together or
different brands or types together.
2. The battery compartment is located on Laugh & Learn Puppy’s back. First
locate the Velcro opening, then remove the cover screw using a Phillips
head screwdriver and install 3 AA batteries paying close attention to
proper battery polarity.
3. Note: A plastic tab was attached to the toy for in-store demonstration
purposes. While the tab may have already been removed, check the back
of the toy to be sure. If the plastic tab is still attached, open the fasteners
on the back of the toy and pull and remove the tab. Close the fasteners and
throw the plastic tab away.
4. Replace the battery compartment cover and secure with the screw. Set the
VOLUME/OFF switch, to the LOW or HIGH VOLUME setting.
5. There are two interactive play modes on Laugh & Learn Puppy. Locate the
mode select switch on puppy's left foot. Press the left foot to turn the toy
on and start in learning mode. Press again for music mode. Press once
more to turn the toy off. (You can also press the touch picture pad in
front of him to do the same functions).
6. Press the puppy's right foot, left hand, nose or tummy or right ear to hear it
identified followed by a short ditty. Press again to learn a color. Press the
note button on the puppy's right hand to hear the A-B-C song. Press again
to hear another fun song about colors, a counting song or a song about the
parts of the body.
7. Press the puppy's right foot to hear “This Little Puppy Went to Market.”
Press again to hear a fun phase. Press the note button on the puppy's right
hand to hear “Head, Shoulders, Knees and Toes.” Press again to hear a fun
phase. Press the puppy's right ear to hear “Do Your Ears Hang Low?”
Press again to hear a fun phase. Press the puppy's left hand to hear “Pat-a-
Cake.” Press again to hear a fun phase. Press the puppy's tummy to hear
“If You're Happy and You Know It.” Press again to hear the puppy giggle
and bark. Press the puppy's nose to hear “The Itsy-Bitsy Spider.” Press
again for a fun phase.
Troubleshooting:
Problem: Laugh & Learn Puppy does not seem to function properly.
Action #1: Low battery power may affect toy function, including irregular
sound and the toy may not turn off. Replace all batteries with alkaline batteries
only.
Action #2: Make sure no object, debris are blocking or causing the picture
switch pad from moving freely.
Care of Unit:
If you will not be using Laugh & Learn Puppy for an extended amount of time,
we recommend removing the batteries.
Do not submerge the unit in water, as it will damage the electrical
components Laugh & Learn Puppy is surface washable only.
Laugh & Learn Puppy can be wiped clean with any mild household multi-
purpose, non-abrasive cleaner and disinfectant. We recommend using a mild
soap or Simple Green, which is a non toxic biodegradable all-purpose cleaner.
Do not use abrasive cleaners, as they will scratch the surface of the unit.
Do not submerge the unit, as it will damage the electrical components.
Rev 7/28/10