Enabling Devices Rusty User manual

For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
-800-832-8697
[e-mail]
Rusty #1074
USER’S GUIDE
50 Broadway
Hawthorne, NY 0532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Our adorable painted pony will put a smile on everyone’s face.
Just activate your capability switch and Rusty trots to the lively
theme song from The Lone Ranger (“William Tell Overture”).
Great for teaching cause and effect and for developing tracking.
Size: "L x 4"W x 8"H. Requires 3 AA Batteries. Weight: ¾ lb.
peration:
. Rusty requires 3 AA batteries. Use alkaline batteries only (e.g.
Duracell or Energizer brand). Do not use rechargeable
batteries or any other type of batteries because they supply
lower voltage and the unit will not perform properly. Never mix
old and new batteries together or different brands or types
together.
2. Turn Rusty over and open up the Velcro enclosure, then using
a Phillips head screwdriver remove the screw and lift the
battery cover off. Observing proper (+) & (-) battery polarity,
install 3 AA size batteries into the holder. Replace the battery
compartment cover and screw.
3. Set the ON/OFF switch to the ON position. Please Note: Due
to switch adaption Rusty will only work through the use of an
external switch. The built in musical note button on his side
will not work.
4. Connect Rusty to any external capability switch via the cord
input jack. Make sure all connections are pushed in all the
way, there should be no gaps. Press and hold your capability
switch and Rusty trots to the lively theme song from The Lone
Ranger (“William Tell Overture”). Great for teaching cause
and effect and for developing tracking.
5. Turn OFF Rusty when finished using to prevent false
activation and battery drain.
Troubleshooting:
Problem: Rusty does not work.
Action #1: Rotate (spin) the batteries within the battery
compartment to ensure a good connection. Check that all
batteries are installed properly.
Action #2: Check all batteries for freshness, if weak or dead
replace with new batteries. Use an alkaline battery (E.G. Duracell
or Energizer brand).
Action #3: Make sure that you have plugged your switch in all
the way. There should be no gaps.
Action #4: Try your external capability switches with another
device to rule out the switches as the source of the problem.
Care of the Unit:
If you will not be using Rusty for an extended amount of time, we
recommend removing the batteries.
Do not submerge the unit in water, as it will damage the
electrical components. Rusty is surface washable only.
Rev 12/13/17