Enabling Devices Lonestar the Longhorn User manual

For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
-800-832-8697
[e-mail]
Lonestar the Longhorn #9328
USER’S GUI E
50 Broadway
Hawthorne, NY 0532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Wearing a blue bandana, Lonestar sings and strums his guitar
to the popular country music song “On the Road Again”. Teach
cause and effect and music appreciation. Works with and
without a switch. Size: 7"L x 8"W x ½"H Weight: ¼ lbs.
Battery: 3 AA
Operation:
. Lonestar requires 3 AA batteries (Not included) to operate.
Use alkaline batteries only (e.g. Duracell or Energizer
brand). Do not use rechargeable batteries or any other type
of batteries because they supply lower voltage and the unit
will not perform properly. Never mix old and new batteries
together or different brands or types together.
2. The battery compartment is located on the bottom of
Lonestar. Open the Velcro flap, then using a Phillips head
screwdriver open and remove the batter cover. Next install 3
AA batteries paying close attention to proper battery polarity.
3. Set the On/Off switch to On. Replace the battery
compartment cover and secure it with the screw.
4. Connect Lonestar to any external capability switch (not
included) via the jack located at the end of his cord. Lonestar
is equipped with a /8" jack for use with external capability
switches with a /8" plug. Make sure you have pushed the
switch plug all the way in. There should be no gaps.
5. Actuate your external capability switch or squeeze
Lonestar’s foot with the musical note symbol and he will sing
and strum his guitar to the popular country music song “On
the Road Again”. Teaches cause and effect and music
appreciation.
6. Each switch activation or foot squeeze will start or stop
Lonestar. If you hit the switch or squeeze his arm again
during play, the music will start from the beginning.
Troubleshooting:
Problem: Lonestar does not function correctly.
Action #1: Replace the batteries paying close attention to
proper battery polarity.
Action #2: Make sure that the connection between the external
capability switch is pushed in all the way. There should be NO
gaps.
Action #3: Try your switch with another switch operated
toy/device in an effort to rule out your switch as the source of
the problems.
Care of Unit:
If you will not be using Lonestar for an extended amount of time,
we recommend removing the batteries.
o not submerge the unit in water, as it will damage the
electrical components. Lonestar is surface washable only.
Rev 6/7/19