Enabling Devices Feel Good Glenn User manual

For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
-800-832-8697
[e-mail]
Feel Good Glenn #9338
USER’S GUIDE
50 Broadway
Hawthorne, NY 0532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Glenn the singing teddy bear makes everyone feel better by
singing and dancing to the song “I Feel Good” when you
activate your capability switch. He comes dressed in hospital
scrubs with an embroidered stethoscope. Works with or without
a switch. Size: 8"L x 9"W x "H. Requires 3 AAA Batteries.
Weight: lb.
Operation:
. Glenn requires 3 AAA batteries (Not included) to operate.
Use alkaline batteries only (e.g. Duracell or Energizer
brand). Do not use rechargeable batteries or any other type
of batteries because they supply lower voltage and the unit
will not perform properly. Never mix old and new batteries
together or different brands or types together.
2. The battery compartment is located on the bottom of Glenn.
Open the Velcro flap, then using a Phillips head screwdriver
open and remove the batter cover. Next install 3 AAA
batteries paying close attention to proper battery polarity.
3. Set the On/Off switch to On. Replace the battery
compartment cover and secure it with the screw.
4. Connect Glenn to any external capability switch (not
included) via the jack located at the end of his cord. Glenn is
equipped with a /8" jack for use with external capability
switches with a /8" plug. Make sure you have pushed the
switch plug all the way in. There should be no gaps.
5. Actuate your external capability switch or squeeze Glenn’s
arm with the musical note symbol and Glenn will start
singing and dancing to the song “I Feel Good”.
6. Each switch activation or arm squeeze will start or stop
Glenn. If you hit the switch or squeeze her arm again during
play, the rhymes and music will start from the beginning.
Trouble hooting:
Problem: Glenn does not function correctly.
Action #1: Replace the batteries paying close attention to
proper battery polarity.
Action #2: Make sure that the connection between the external
capability switch is pushed in all the way. There should be NO
gaps.
Action #3: Try your switch with another switch operated
toy/device in an effort to rule out your switch as the source of
the problems.
Care of Unit:
If you will not be using Glenn for an extended amount of time,
we recommend removing the batteries.
Do not ubmerge the unit in water, as it will damage the
electrical components Glenn is surface washable only.
Rev 2/12/2020