Enabling Devices Rockin' Robbie User manual

For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
-800-832-8697
[e-mail]
Rockin’ Robbie #9335
USER’S GUIDE
50 Broadway
Hawthorne, NY 0532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

This adorable tree sings and sways while lights flash to "Rockin'
Around the Christmas Tree" when you activate your switch. Size:
6"L x 6"W x 2"H. Requires 3 AA Batteries. Weight: ½lbs.
Operation:
. Rockin’ Robbie requires 3 AA batteries. Use alkaline batteries
only (e.g. Duracell or Energizer brand). Do not use
rechargeable batteries or any other type of batteries because
they supply lower voltage and the unit will not perform
properly. Never mix old and new batteries together or different
brands or types together.
2. Turn Rockin’ Robbie over and open up the Velcro enclosure,
then using a Phillips head screwdriver remove the screw and
lift the battery cover off. Observing proper (+) & (-) battery
polarity, install 3 AA size batteries into the holder. Replace the
battery compartment cover and screw.
3. Set the ON/OFF switch to the ON position. lease Note:
Rockin’ Robbie will work through the use of an external switch
or the built in musical note button on his side.
4. Connect Rockin’ Robbie to any external capability switch via
the cord input jack. Make sure your switch is plugged in all the
way, there should be no gaps. Press and release your
capability switch and this adorable tree sings and sways while
lights flash to "Rockin' Around the Christmas Tree". Great for
teaching cause and effect and for developing tracking. If you
press your switch while he is playing Rockin’ Robbie will stop.
Pressing and releasing your switch again will start the song
from the beginning.
5. Turn OFF Rockin’ Robbie when finished using to prevent false
activation and battery drain.
Troubleshooting:
roblem: Rockin’ Robbie does not work.
Action #1: Rotate (spin) the batteries within the battery
compartment to ensure a good connection. Check that all
batteries are installed properly.
Action #2: Check all batteries for freshness, if weak or dead
replace with new batteries. Use an alkaline battery (E.G. Duracell
or Energizer brand).
Action #3: Make sure that you have plugged your switch in all
the way. There should be no gaps.
Action #4: Try your external capability switches with another
device to rule out the switches as the source of the problem.
Care of the Unit:
If you will not be using Rockin’ Robbie for an extended amount of
time, we recommend removing the batteries.
Do not submerge the unit in water, as it will damage the
electrical components. Rockin’ Robbie is surface washable only.
Rev 10/20/19