evertz 2400PSUA-8 User manual

2400PSUA-8
8 Channel Power Supply for 240xLT/LR Series
Instruction Manual
© Copyright 2007 - 2017
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive,
Burlington, Ontario, Canada
L7L 5Z9
Phone: [phone] Internet: Sales: [email protected]
Sales Fax: [phone] Tech Support: [email protected]
Tech Support Phone: [phone] Web Page: http://www.evertz.com
Tech Support Fax: [phone]
Revision 1.2, January 2017
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely
for the use of purchasers of the 2400 series products. Evertz Microsystems expressly prohibits the use of this manual for any
purpose other than the operation of the Routers.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems
Ltd. Copies of this guide can be ordered from your Evertz products dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
Model 2400PSUA-8
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-
insulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC –
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DIS
CONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

IMPORTANT SAFETY INSTRUCTIONS
Model 2400PSUA-8-WP
The lightning flas
h with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-insulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, or objects have fallen
into the apparatus, the apparatus does not operate normally, or has been dropped.
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
This equipment with the CE marking complies with both the EMC Directive (2004/108/EC) and the Low Voltage
Directive (2006/95/EC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European standards:
•EN60065 Product Safety
•EN55103-1 Electromagnetic Interference Class A (Emission)
•EN55103-2 Electromagnetic Susceptibility (Immunity)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to the
European Union EMC directive. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
EN600065
Safety
EN504192 2005
Waste electrical products should not
be disposed of with household
waste. Contact your Local Authority
for recycling advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity

INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
WARNING
Changes or modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment. Use of unshielded plugs or cables may cause radiation interference.
Properly shielded interface cables with the shield connected to the chassis ground of the device must be
used.
Evertz Microsystems Ltd This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
This device may cause harmful interference, and this device must
accept any interference received, including interference that may
cause undesired operation.
Tested to comply
with FCC
Standards
For Commercial Use

2400PSUA-8 - Eight Channel 240xLT/LR DC Power Supply
Revision 1.2 Page i
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0 First Release Jan 11
1.1 Updated for safety instructions Mar 11
1.2 Updates throughout Jan 17
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for
the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of
Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty
offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty
is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order
confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you
encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in
equipment design or specifications.

2400PSUA-8 - Eight Channel 240xLT/LR DC Power Supply
Page ii Revision 1.2
TABLE OF CONTENTS
1. OVERVIEW .......................................................................................................................................1
2. INSTALLATION.................................................................................................................................3
2.1. 2400PSUA-8 CONNECTIONS ..................................................................................................5
3. SPECIFICATIONS.............................................................................................................................7
3.1. AC INPUT .................................................................................................................................7
3.2. DC OUTPUT .............................................................................................................................7
3.3. PHYSICAL ................................................................................................................................7
3.4. ENVIRONMENTAL ...................................................................................................................7
4. STATUS INDICATORS......................................................................................................................9
4.1. PSU1 AND PSU2 INDICATORS ...............................................................................................9
4.2. UNIT 1-8 INDICATORS.............................................................................................................9
Figures
Figure 1-1: 2400PSUA-8 Block Diagram............................................................................................................... 1
Figure 2-1: 2400PSUA-8 ....................................................................................................................................... 3
Figure 2-2: 2400PSUA-8-WP................................................................................................................................ 3
Figure 2-3: 2400PSUA-8 Dimensions and Mounting Centers ............................................................................... 4

2400PSUA-8 - Eight Channel 240xLT/LR DC Power Supply
Revision 1.2 Page 1
1. OVERVIEW
The 2400PSUA-8 is used to supply power to up to eight 240xLT series RF fiber optic transmitters
including DC power for upstream LNBs, and/or 240xLR series fiber optic receivers. It contains dual,
isolated, redundant DC power supplies and provides eight outputs on F-Type connectors. The
2400PSUA-8-WP version adds dust/water protection to IP65 for use outdoors.
Features:
•Provides isolated, redundant DC power for up to eight 240xLT/LR series modules and upstream
LNBs
•Active current limit/short circuit protection of each DC output
•LED indicators display the status of each power supply and DC output
•PSU status signal output for remote monitoring via connected 2407LTA/2408LT transmitter and
SmartMONTM-enabled fiber receiver.
•Weather-proof option available for mounting outdoors
Figure 1-1: 2400PSUA-8 Block Diagram

2400PSUA-8 - Eight Channel 240xLT/LR DC Power Supply
Page 2Revision 1.2
This page left intentionally blank