evertz 570DSK-25G Series User manual

570DSK-25G Series
Single Path Downstream Keyer with Logo Insertion
User Manual
© Copyright 2021
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone: [phone]
Sales: [e-mail] Fax: [phone]
Tech Support: [e-mail] Fax: [phone]
Web Page: http://www.evertz.com Twitter: @EvertzTV
Version 2.0, February 2021
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of
purchasers of the 570DSK Series Logo Inserter. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the
operation of the 570DSK Series Logo Inserter.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies
of this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol
within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read this information
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC –
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
This equipment with the CE marking complies with both the EMC Directive (89/336/EEC) and the Low
Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European standards:
•EN60065 Product Safety
•EN55103-1 Electromagnetic Interference Class A (Emission)
•EN55103-2 Electromagnetic Susceptibility (Immunity)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
WARNING
Changes or modifications not expressly approved by Evertz Microsystems Ltd. Could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used.

570DSK-3G/4K-25G
Logo Inserter
Revision 2.0 Page i
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0
First Release
Sept 2019
2.0
Updated features
Feb 2021
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof or
for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance
of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty
offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty
is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order
confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you
encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in
equipment design or specifications.

570DSK-3G/4K-25G
Logo Inserter
Page ii Revision 2.0
This page left intentionally blank

570DSK-3G/4K-25G
Logo Inserter
Revision 2.0 Page iii
TABLE OF CONTENTS
1. OVERVIEW ...................................................................................................................................1
2. INSTALLATION ............................................................................................................................3
2.1. FRONT AND REAR PANEL OVERVIEW.............................................................................5
2.1.1. Front Plate.................................................................................................................5
2.1.2. Rear Plate .................................................................................................................6
2.1.3. Reference..................................................................................................................7
2.2. POWER REQUIREMENTS...................................................................................................7
2.3. CONNECTING TO AN ETHERNET NETWORK ..................................................................8
2.4. MODULE CONFIGURATION ...............................................................................................9
2.5. CONFIGURING THE MODULE USING THE CARD EDGE SERIAL PORT.........................9
2.5.1. Network Configuration ...............................................................................................9
2.6. CONNECTING THE VIDEO................................................................................................11
2.6.1. Video Inputs ............................................................................................................11
3. HOW TO OPERATE DOWNSTREAM KEYER USING VISTALINK® PRO ................................12
3.1. WHAT IS VISTALINK®? .....................................................................................................13
3.2. DEVICE STATUS ...............................................................................................................14
3.3. DEVICE CONFIG ...............................................................................................................15
3.4. PTP CONTROL ..................................................................................................................17
3.5. QSFP ................................................................................................................................19
3.6. CONTROL INTERACES ....................................................................................................20
3.7. DATA INTERFACES ..........................................................................................................20
3.8. VIDEO INPUT STREAMS ..................................................................................................21
3.9. VIDEO OUTPUT STREAMS...............................................................................................22
3.10. AUDIO INPUT STREAMS ..................................................................................................23
3.11. AUDIO OUTPUT STREAMS ..............................................................................................24
3.12. ANC INPUT STREAMS......................................................................................................25
3.13. ANC OUTPUT STREAMS..................................................................................................25
3.14. HOST CONFIGURATION AND IP ROUTES ......................................................................26
3.15. NMOS ................................................................................................................................27
3.16. GPIO CONFIG....................................................................................................................28
4. WEB INTERFACE.......................................................................................................................29
4.1. DEVICE STATUS ...............................................................................................................31
4.2. DEVICE CONFIG ...............................................................................................................32
4.3. PTP CONTROL ..................................................................................................................34
4.4. QSFP ................................................................................................................................36
4.5. CONTROL INTERFACES ..................................................................................................36
4.6. DATA INTERFACES ..........................................................................................................37
4.7. VIDEO INPUT STREAMS ..................................................................................................38
4.8. VIDEO OUTPUT STREAMS...............................................................................................39
4.9. AUDIO INPUT STREAMS ..................................................................................................39
4.10. AUDIO OUTPUT STREAMS ..............................................................................................40
4.11. ANC INPUT STREAMS......................................................................................................41
4.12. ANC OUTPUT STREAMS ..................................................................................................41
4.13. HOST CONFIGURATION AND IP ROUTES ......................................................................42
4.14. NMOS ................................................................................................................................43
4.15. GPIO CONFIG....................................................................................................................44
5. UPGRADE PROCEDURES ........................................................................................................45

570DSK-3G/4K-25G
Logo Inserter
Page iv Revision 2.0
5.1. FIRMWARE UPGRADE .....................................................................................................45
5.2. DEFINITIONS.....................................................................................................................47
6. SPECIFICATIONS ........................................................................................................................3
6.1. VIDEO INTERFACES...........................................................................................................3
6.2. REFERENCE .......................................................................................................................3
6.3. ETHERNET INTERFACE .....................................................................................................3
6.4. DATA FORMAT ...................................................................................................................3
6.5. PHYSICAL ...........................................................................................................................3
6.6. ENCLOSURES.....................................................................................................................3
TABLE OF FIGURES
Figure 1-1 : 570DSK (-3G) (-4K) -25G Block Diagram .....................................................................................2
Figure 3-1 : 570DSK-25G Rear and Front Panels ............................................................................................5
Figure 3-2 : Tera Term – Main Menu ................................................................................................................9
Figure 3-3 : Tera Term – Network Configuration ............................................................................................10
Figure 3-4 : Tera Term – Saving New IP ........................................................................................................10
Figure 4-1 : VistaLINK® Pro - Device Status ...................................................................................................14
Figure 4-2 : : VistaLINK® Pro – Device Config ................................................................................................15
Figure 4-3 : VistaLINK® Pro - PTP Control ......................................................................................................17
Figure 4-4 : VistaLINK® Pro – QSFP ...............................................................................................................19
Figure 4-5 : VistaLINK® Pro – Control Interfaces / 1G Ethernet......................................................................20
Figure 4-6 : VistaLINK® Pro – Data Interfaces / 25G Ethernet........................................................................20
Figure 4-7 : VistaLINK® Pro – Video Input Streams ........................................................................................21
Figure 4-8 : VistaLINK® Pro – Video Output Streams .....................................................................................22
Figure 4-9 : VistaLINK®Pro - Input Audio Streams........................................................................................23
Figure 4-10 : VistaLINK® Pro – Audio Output Streams ...................................................................................24
Figure 4-11 : VistaLINK® Pro – ANC Input Streams........................................................................................25
Figure 4-12 : VistaLINK® Pro – ANC Output Streams.....................................................................................25
Figure 4-13 : VistaLINK® Pro – Host Configuration and IP Routes .................................................................26
Figure 4-14 : VistaLINK® Pro – NMOS ............................................................................................................27
Figure 4-15 : VistaLINK® Pro – GPIO Config ..................................................................................................28
Figure 5-1 : WebEASY® - Login Menu ............................................................................................................29
Figure 5-2 : WebEASY® - 570DSK-25G Main Menu .......................................................................................30
Figure 5-3 : WebEASY® - Device Status .........................................................................................................31
Figure 5-4 : WebEASY® - Device Config.........................................................................................................32
Figure 5-5 : WebEASY® - PTP Status .............................................................................................................34
Figure 5-6 : WebEASY® - QSFP .....................................................................................................................36
Figure 5-7 : WebEASY® - 1G Ethernet............................................................................................................37
Figure 5-8 : WebEASY® - 25G Ethernet..........................................................................................................37
Figure 5-9 : WebEASY® - Input Streams.........................................................................................................38
Figure 5-10 : WebEASY® - Output Streams ....................................................................................................39
Figure 5-11 : WebEASY® - Audio Input Streams.............................................................................................39
Figure 5-12 : WebEASY® - Audio Output Streams..........................................................................................40
Figure 5-13 : WebEASY® - ANC Input Streams ..............................................................................................41
Figure 5-14 : WebEASY® - ANC Output Streams ...........................................................................................41
Figure 5-15 : WebEASY® - Host Configuration and IP Routes .......................................................................42
Figure 5-16 : WebEASY® - NMOS ..................................................................................................................43
Figure 5-17 : WebEASY® - GPIO Config.........................................................................................................44
Figure 6-1 : WebEASY® - Upgrade Button on Top Menu Bar .........................................................................45
Figure 6-2 : WebEASY® - Firmware Upgrade Menu .......................................................................................45
Figure 6-3 : Firmware File Select ....................................................................................................................46
Figure 6-4 : WebEASY® - Firmware Upgrade Menu .......................................................................................46

570DSK-3G/4K-25G
Logo Inserter
Revision 2.0 Page 1
1. OVERVIEW
The 570DSK-25G is a single path Downstream UHD IP Keyer with Logo insertion. As part of ‘Evertz’
Software Defined Video Networking solution, the 570DSK-25G is an IP-based downstream keyer with
25GbE I/O for HD/3G/12G with an external keyer (from Key/Fill inputs) and an internal logo keyer for
animations and static logos. Content for internal logo layer is stored on a customer provided NAS server.
The 570DSK-25G can be controlled by VUE, Evertz customizable user interface and/or third-party
automation system over IP. The 570DSK-25G is VistaLINK® capable, offering remote monitoring, control
and configuration capabilities via Simple Network Management Protocol (SNMP).
Features
•One 3G/4K/UHD external keyer (with external key and fill).
•Video formats: HD/3G Level A and 12G single essence.
•Full 12-bit linear keyer with video fade-in and fade-out processing.
•Insert static or animated logos from NAS storage.
•Multiple control interfaces and/or third-party automation using IP.
•Support for SMPTE ST 2110, including SMPTE 2059 for PTP Timing
•Support for Multipath Merge based on SMPTE 2022-7
Network Management
•Built in VistaLINK® support for remote monitoring and control via SNMP (using VistaLINK® PRO)

570DSK-3G/4K-25G
Logo Inserter
Page 2 Revision 2.0
Figure 1-1 : 570DSK (-3G) (-4K) -25G Block Diagram

570DSK-3G/4K-25G
Logo Inserter
Revision 2.0 Page 3
2. SPECIFICATIONS
2.1. VIDEO INTERFACES
Program, Key and Fill
Standards SMPTE 424M (3Gb/s)
SMPTE 425-5 (Quad-link 3Gb/s)
SMPTE 2082 (12Gb/s) for video payload definition
Video Encapsulation SMPTE 2110-20
Audio Encapsulation SMPTE 2110-30
Metadata Encapsulation SMPTE 2110-40
2.2. REFERENCE
•SMPTE 2059
2.3. ETHERNET INTERFACE
•4XQSFP28
•2XRJ-45 (10/100/1000)
2.4. DATA FORMAT
•Ethernet/IP/UDP
2.5. PHYSICAL
Number of Slots 1
2.6. ENCLOSURES
570FR 15-slot 3RU chassis
Ordering Information
570DSK-25G 3G/4K/UHD Single Downstream Keyer with Internal logo with Web
and VistaLINK support

570DSK-3G/4K-25G
Logo Inserter
Page 4 Revision 2.0
Page left intentionally blank

570DSK-3G/4K-25G
Logo Inserter
Revision 2.0 Page 5
3. INSTALLATION
3.1. FRONT AND REAR PANEL OVERVIEW
Figure 3-1 shows the Front and Rear panel of the 570DSK-25G modules. Sections 3.1.1 to 3.1.3 describe
the specific video and control signals that should be connected to the 570DSK-25G and 570DSK-25G
front & rear plates.
Figure 3-1 : 570DSK-25G Rear and Front Panels
3.1.1. Front Plate
The front plate of the 570DSK-25G series is equipped with 2x QSFP ports capable of passing 25GB of
data per port.

570DSK-3G/4K-25G
Logo Inserter
Page 6 Revision 2.0
QSFP 1: This QSFP connector is the Main Program, Fill and Key input to the 570DSK(-4K)(-3G)-
25G. The Program, Preview and HD Downconvert output is also on the same connector.
Below is a breakdown of each of the lanes in the QSFP:
Lane 1 - Input: Program & Fill
- Output: Program & HD Downconvert
Lane 2 - Input: Key
- Output: Preview
Lane 3 - Input: Not used
Lane 4 - Input: Not used
QSFP 2: This QSFP connector is the Backup Program, Fill and Key input to the 570DSK(-4K)(-3G)-
25G. The Program, Preview and HD Downconvert is also on the same connector.
Below is a breakdown of each of the lanes in the QSFP:
Lane 1 - Input: Program & Fill
- Output: Program & HD Downconvert
Lane 2 - Input: Key
- Output: Preview
Lane 3 - Input: Not used
Lane 4 - Input: Not used
3.1.2. Rear Plate
The rear plate of the 570DSK-25G is equipped with 2x QSFP ports capable of passing 25GB of data per
port and includes 2x 1G Ethernet ports.

570DSK-3G/4K-25G
Logo Inserter
Revision 2.0 Page 7
QSFP 3: This QSFP connector goes to the 570HDC to provide an HD Downconvert of the Program
video to the 570DSK-25G.
Below is a breakdown of each of the lanes in the QSFP:
Lane 1 - Input: HD Downconvert
- Output: HD Downconvert
Lane 2 - Input: Not used
Lane 3 - Input: Not used
Lane 4 - Input: Not used
QSFP 4: This QSFP provides a 10G Data connection to the 570DSK-25G.
Below is a breakdown of each of the lanes in the QSFP:
Lane 1 - Input: 10G Data
- Output: 10G Data
Lane 2 - Input: Not used
Lane 3 - Input: Not used
Lane 4 - Input: Not used
Ethernet 1: Network port to access the webpage, VistaLink and a connection to the FTP Server.
Ethernet 2:Network port to access the webpage, VistaLink and a connection to the FTP Server.
3.1.3. Reference
PTP: The 570DSK-25G can receive the PTP from QSFP interfaces.
3.2. POWER REQUIREMENTS
The standard 570DSK-25G is a 1 slot card contained within the 570FR. The 570FR frame comes
standard with one auto-ranging power supply that automatically senses the input voltage over the range
of 100 to 240 VAC. An additional power supply (570PS) can be ordered to provide fully redundant
powering of the frame. Power should be applied by connecting a 3-wire grounding type power supply
cord to the power entry module on the rear panel of each power supply. The power cord should be
minimum 18 AWG wire size; type SVT marked VW-1, maximum 2.5m in length.
The power entry modules contain a standard IEC power inlet connector, two 5 x 20 mm fuse holders and
an EMI line filter.
CAUTION – TO REDUCE THE RISK OF ELECTRICAL SHOCK, GROUNDING OF
THE GROUND PIN OF THE MAINS PLUG MUST BE MAINTAINED.

570DSK-3G/4K-25G
Logo Inserter
Page 8 Revision 2.0
3.3. CONNECTING TO AN ETHERNET NETWORK
The 570DSK-25G is designed to be used with either a 1Gbe or 10Gbe network also known as Fast
Ethernet, twisted pair Ethernet cabling systems. The cable must be “straight through” with a
RJ-45 connector at each end. Create a network connection by plugging one end of the cable into the
RJ-45 receptacle of the 570DSK-25G and the other end into a port of the supporting network device.
The straight-through RJ-45 cable can be purchased or can be constructed using the pinout information
in Table 3-1. A color code wiring table is provided in Table 3-1 for the current RJ 45 standards (AT&T
258A or EIA/TIA 258B color coding shown). Also refer to the notes following the table for additional wiring
guide information.
Pin 1
Pin # Signal EIA/TIA 568A
AT&T 258A or
EIA/TIA 568B
10BaseT
or 100BaseT
1
Transmit +
White/Green
White/Orange
X
2
Transmit –
Green/White or White
Orange/White or Orange
X
3
Receive +
White/Orange
White/Green
X
4
N/A
Blue/White or Blue
Blue/White or Blue
Not used (required)
5
N/A
White/Blue
White/Blue
Not used (required)
6
Receive –
Orange/White or Orange
Green/White or Green
X
7
N/A
White/Brown
White/Brown
Not used (required)
8
N/A
Brown/White or Brown
Brown/White or Brown
Not used (required)
Table 3-1 : Standard RJ45 Wiring Color Codes
Note the following cabling information for this wiring guide:
•Only two pairs of wires are used in the 8-pin RJ 45 connector to carry Ethernet signals.
•Even though pins 4, 5, 7 and 8 are not used, it is mandatory that they be present in the cable.
•10BaseT and 100BaseT use the same pins; a crossover cable made for one will also work with the
other.
•Pairs may be solid colors and not have a stripe.
•Category 5 cable must use Category 5 rated connectors.
The maximum cable run between the downstream keyer and the supporting hub is 300 ft (90 m). The
maximum combined cable run between any two end points (i.e. downstream keyer and PC/laptop via
network hub) is 675 feet (205 m).
Devices on the Ethernet network continually monitor the receive data path for activity as a means of
checking that the link is working correctly. When the network is idle, the devices also send a link test
signal to one another to verify link integrity. The downstream keyer rear panel is fitted with two LEDs to
monitor the Ethernet connection.
10/100: This LED is ON when a 100Base-TX link is last detected. The LED is OFF when a 10Base-
T link is last detected. Upon power-up the LED is OFF as the last detected rate is not known
and therefore defaults to the 10Base-T state until rate detection is completed.
LN/ACT: This dual purpose Green LED indicates that the 570DSK-25G has established a valid
linkage to its hub, and it determines whether the 570DSK-25G is sending or receiving data.
This LED will be ON when the 570DSK-25G has established a good link to its supporting
hub. This gives you a good indication that the segment is wired correctly. The LED will
BLINK when the 570DSK-25G is sending or receiving data. The LED will be OFF if there is
no valid connection.

570DSK-3G/4K-25G
Logo Inserter
Revision 2.0 Page 9
3.4. MODULE CONFIGURATION
The 570DSK-25G module features and parameters are configured through the following tools:
Module Serial Port: Module IP address network identification
VistaLINK®PRO: An SNMP software tool that is used to configure the module’s parameters for normal
operation.
Web Server Interface: A web browser can be used to connect to the 570DSK-25G to configure the I/O
and other parameters. This interface doesn’t require any additional software to be installed.
3.5. CONFIGURING THE MODULE USING THE CARD EDGE SERIAL PORT
•Through the card edge’s serial port, and using the serial 7700 upgrade cable connected to a PC’s
serial port running HyperTerminal (or equivalent), the 570DSK module’s IP address and subnet are
identified. The 7700 upgrade cable supplied with the 570FR frame is a multi-colored ribbon cable
with a six pin header socket on one end and a female 9 pin D connector on the other end (Evertz
part number WA-S76). This cable is normally in the vinyl pouch at the front of the manual binder.
Connect the ribbon cable to port to J24 and power up the card. Configure the port settings of the
terminal program as follows:
Baud
115200
Parity
no
Data bits
8
Stop bits
2
Flow Control
None
Table 3-2 : Port Settings
•When the card is powered-up, the HyperTerminal connection displays boot-up status information
and once completed, ends with the “Status Message” as shown in Figure 3-2.
•Login with customer/customer credentials.
Figure 3-2 : Tera Term – Main Menu
3.5.1. Network Configuration
•Enter the Ethernet port you would like to change/set the IP address configuration. See below
screenshot for reference. Eth0 is control port 2 and eth1 is control port 1. You can find the IP
addresses for these ports by logging with root/evertz and type ‘ifconfig eth0’ or ‘ifconfig eth1’.

570DSK-3G/4K-25G
Logo Inserter
Page 10 Revision 2.0
Figure 3-3 : Tera Term – Network Configuration
•To save the new IP address, login again with root/evertz and type ‘reboot’. See Figure 3-4 below
screenshot for reference.
Figure 3-4 : Tera Term – Saving New IP

570DSK-3G/4K-25G
Logo Inserter
Revision 2.0 Page 11
3.6. CONNECTING THE VIDEO
3.6.1. Video Inputs
The HD or 3G or 4K program video source should be connected to QSFP 1 (Main) and QSFP 2 (Backup).
The 570DSK-25G supports HD or 3G or 4K video in the formats shown in Table 3-3. The video standard
must be set manually to match the incoming video type (see section 4.8 for VLPRO Configuration).
Common
Name
Pixels /
Active Lines
Frame Rate
Progressive/
Interlace
Standard
1080i/50 1920 x 1080 25 I SMPTE
1080i/59.94 1920 x 1080 29.97 (30/1.001) I SMPTE
720p50 1280 x 720 50 P SMPTE
720p59.94 1280 x 720 59.94 P SMPTE
1080p/50 1920 x 1080 50 P SMPTE
1080p/59.94 1920 x 1080 59.94 P SMPTE
4K/50 3840 x 2160 50 P SMPTE
4K/59.94 3840 x 2160 59.94 P SMPTE
Table 3-3 : Video Input Formats

570DSK-3G/4K-25G
Logo Inserter
Page 12 Revision 2.0
Page left intentionally blank