evertz HDSD9545DLY-PRO User manual

HDSD9545DLY-PRO
Profanity Bypass Delay System
Instruction Manual
© Copyright 2004 - 2011
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive,
Burlington, Ontario,
Canada,
L7L 5Z9
Phone: [phone]
Sales Fax: [phone]
Service Fax: [phone]
Internet: Sales: [email protected]
Tech Support: [email protected]om
Web Page: http://www.evertz.com
Version 1.3.7, February 2011
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for
the use of purchasers of the Profanity Bypass Delay System. Evertz Microsystems expressly prohibits the use of this manual for
any purpose other than the operation of these units.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems
Ltd. Copies of this guide can be ordered from your Evertz products dealer or from Evertz Microsystems.

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature ac-companying the product.
•Read this information
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC – SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT.
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE.
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.

INFORMATION TO USERS IN EUROPE
NOTE
This equipment with the CE marking complies with bother the EMC Directive (89/336/EEC) and the Low
Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European standards:
•EN60065 Product Safety
•EN55103-1 Electromagnetic Interference Class A (Emission)
•EN55103-2 Electromagnetic Susceptibility (Immunity)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used

HDSD9545DLY - PRO Profanity Bypass Delay Manual
REVISION HISTORY Revision 1.3.7
REVISION HISTORY
REVISION DESCRIPTION DATE
0.1 Quick Reference Guide Aug 2004
0.2 Preliminary Manual Oct 2004
0.3 Updated Transition Menu item, remove Remote Panel section Nov 2004
0.4 Updated Front & Rear panel drawings, and sections relating to Video out D & E Nov 2004
1.0 First Release - updated FTP Firmware Update, Dec 2004
Remove sections related to DARS reference, remove GPIO Setup Menu items
1.1 Updated Block Diagram, Jan 2005
Add PGM BLURR and SAFE BLURR menu items
1.2 Added block diagrams for HD40 option Mar 2005
1.3 Corrected block diagram, added support for 50 Hz standards, Aug 2005
Updated Transition list to match existing software, other typos fixed.
1.3.1 Updated specs Jan 2006
1.3.2 Removed all references to the rack mount Remote Panel. Feb 2007
1.3.3 Added React. Time BYP menu item Jun 2007
1.3.4 Added ‘blank video sw’ and ‘h blank video sw’ controls to section 3.8.2. Aug 2007
1.3.5 Updated electrical specifications Apr 2010
1.3.6 Updated information in Saving the Configuration to a User Preset section Sept 2010
1.3.7 Added note regarding on-air path to overview section Feb 2011
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for
the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of
Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty offered
by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty is
granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order confirmation.
Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you encounter an error,
please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in equipment design or
specifications.

HDSD9545DLY - PRO Profanity Bypass Delay Manual
Revision 1.3.7 REVISION HISTORY
This page left intentionally blank

HDSD9545DLY - PRO Profanity Bypass Delay Manual
CONTENTS Revision 1.3.7 i
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS..................................................................................................1-3
1. OVERVIEW ...................................................................................................................................... 1-1
1.1. HOW TO USE THIS MANUAL................................................................................................1-3
1.2. GLOSSARY............................................................................................................................. 1-3
2. INSTALLATION................................................................................................................................ 2-1
2.1. REAR PANEL OVERVIEW ..................................................................................................... 2-1
2.1.1. Digital Video Connections............................................................................................2-1
2.1.2. Reference Video Connections...................................................................................... 2-2
2.1.3. AES AUDIO Connections.............................................................................................2-2
2.1.4. Ethernet Network Connections..................................................................................... 2-2
2.1.5. Serial I/O and GPI/O Connections ............................................................................... 2-3
2.1.6. Power Connections......................................................................................................2-4
2.2. MOUNTING ............................................................................................................................. 2-4
2.3. POWER REQUIREMENTS...................................................................................................... 2-4
2.4. CONNECTING THE VIDEO.....................................................................................................2-5
2.4.1. Video Inputs .................................................................................................................2-5
2.4.2. Video Outputs ..............................................................................................................2-5
2.4.3. Video Timing Reference...............................................................................................2-6
2.5. CONNECTING THE AUDIO....................................................................................................2-6
2.5.1. Connecting Program (‘Live’) Audio............................................................................... 2-6
2.5.2. Connecting Backup (‘Safe’) Audio................................................................................ 2-6
2.5.3. Connecting the Audio Outputs .....................................................................................2-6
2.6. CONNECTING TO AN ETHERNET NETWORK..................................................................... 2-7
2.7. CONNECTING THE GENERAL PURPOSE INPUTS AND OUTPUTS .................................. 2-8
2.7.1. Connecting the General Purpose Inputs......................................................................2-8
2.7.2. Connecting the General Purpose Outputs ................................................................. 2-10
3. OPERATION..................................................................................................................................... 3-1
3.1. OVERVIEW OF THE FRONT PANEL DISPLAY AND CONTROLS ...................................... 3-1
3.1.1. Trigger Key Group........................................................................................................3-1
3.1.2. Preset Key Group.........................................................................................................3-2
3.1.3. Setup Key Group..........................................................................................................3-2
3.1.4. Front Panel Display Messages..................................................................................... 3-2
3.2. OVERVIEW OF OPERATION ................................................................................................. 3-3
3.3. FRONT PANEL SETUP MENU............................................................................................... 3-4
3.4. NAVIGATING THE SETUP MENU.......................................................................................... 3-5
3.5. SETUP MENU – TOP LEVEL MENU...................................................................................... 3-5
3.6. CONFIGURING THE VIDEO AND AUDIO OUTPUTS............................................................ 3-6
3.6.1. Configuring the Video Outputs.....................................................................................3-7
3.6.2. Configuring the Audio Outputs.....................................................................................3-7

HDSD9545DLY - PRO Profanity Bypass Delay Manual
ii Revision 1.3.7 CONTENTS
3.7. CONFIGURING THE ON SCREEN DISPLAY ........................................................................ 3-7
3.7.1. Enabling the On Screen Displays.................................................................................3-8
3.8. CONFIGURING THE TRANSITION ACTIONS.......................................................................3-8
3.8.1. Setting the Active State of the GPI Inputs....................................................................3-8
3.8.2. Setting the Functions of the GPI Input, GPO Outputs and Trigger Buttons .................3-8
3.9. CONFIGURING THE TRANSITION TIMING.........................................................................3-11
3.9.1. Setting the Operator Reaction Time...........................................................................3-11
3.9.2. Setting the Reaction Time Bypass............................................................................. 3-11
3.9.3. Setting the Merge Time..............................................................................................3-11
3.9.4. Setting the Video Delay Time.....................................................................................3-12
3.9.4.1. Setting the Program Video Delay Time .......................................................3-12
3.9.4.2. Setting the Safe Video Delay Time..............................................................3-12
3.9.5. Setting the Program Audio Delay Time......................................................................3-12
3.9.6. Setting the Safe Audio Delay Time ............................................................................3-12
3.10. CONFIGURING THE VIDEO................................................................................................. 3-13
3.10.1. Setting the Video Standard ........................................................................................3-13
3.10.2. Setting up the Video Reference .................................................................................3-14
3.10.3. Setting Up the Video Output Timing...........................................................................3-14
3.10.3.1.Setting the Vertical Phase of the Output Video ...........................................3-14
3.10.3.2.Setting the Horizontal Phase of the Output Video.......................................3-15
3.10.4. Setting the Video Bypass Mode.................................................................................3-15
3.10.5. Enabling Safe Capture Mode.....................................................................................3-15
3.10.6. Setting the Amount of Blur on the Program Delayed Video.......................................3-16
3.10.7. Setting the Amount of Blur on the Safe Delayed Video..............................................3-16
3.11. CONFIGURING THE AUDIO.................................................................................................3-16
3.11.1. Enabling the AES Audio SoftSwitch™for Clean Audio Switches...............................3-17
3.11.2. Enabling the Embedded Audio SoftSwitch™For Clean Audio Switches ...................3-17
3.12. SAVING AND RECALLING CONFIGURATION PRESETS .................................................3-17
3.12.1. Recalling a Preset Configuration................................................................................3-18
3.12.2. Saving the Configuration to a User Preset.................................................................3-18
3.13. MANAGING THE FIRMWARE.............................................................................................. 3-18
3.13.1. Viewing the Firmware Version....................................................................................3-19
3.13.2. Viewing the Maximum Delay......................................................................................3-19
3.13.3. Updating the Firmware Version..................................................................................3-19
4. TECHNICAL DESCRIPTION............................................................................................................4-1
4.1. SPECIFICATIONS...................................................................................................................4-1
4.1.1. Serial Digital Video Inputs............................................................................................4-1
4.1.2. Serial Digital Video Outputs .........................................................................................4-1
4.1.3. Video Reference...........................................................................................................4-1
4.1.4. DARS Reference (not implemented at the time of writing)...........................................4-2
4.1.5. AES Audio Inputs.........................................................................................................4-2
4.1.6. AES Audio Outputs ......................................................................................................4-2
4.1.7. GPI Control Port...........................................................................................................4-2
4.1.8. Remote Control Port.....................................................................................................4-2
4.1.9. Functional.....................................................................................................................4-2
4.1.10. Electrical.......................................................................................................................4-3
4.1.11. Physical........................................................................................................................4-3
4.2. SERVICING INSTRUCTIONS .................................................................................................4-3

HDSD9545DLY - PRO Profanity Bypass Delay Manual
CONTENTS Revision 1.3.7 iii
4.2.1. Changing the Fuses.....................................................................................................4-3
4.2.2. JUMPERS....................................................................................................................4-4
4.2.2.1. Configuring the Unit for a DARS Reference
(DARS reference not implemented at the time of writing)............................. 4-4
4.2.2.2. Configuring the Module for Firmware Upgrades
using the Serial Port Method......................................................................... 4-4
4.3. UPGRADING FIRMWARE ...................................................................................................... 4-4
4.3.1. Upgrading the Firmware using FTP ............................................................................. 4-5
4.3.1.1. Step 1 – Determine the IP Addresses........................................................... 4-5
4.3.1.2. Step 2 – Establishing a Valid Network Connection ....................................... 4-6
4.3.1.3. Step 3 – Upgrading the Application Code ..................................................... 4-7
4.3.1.4. Step 4 – Completing the Upgrade................................................................. 4-8
4.3.2. Upgrading the Firmware using RS-232 Serial Cable ................................................... 4-8
4.3.2.1. Step 1 – Setup...............................................................................................4-8
4.3.2.2. Step 2 – Invoke Upload Mode from the Terminal Program........................... 4-9
4.3.2.3. Step 3 – Uploading the New Firmware.......................................................... 4-9
4.3.2.4. Step 4 – Completing the Upgrade............................................................... 4-10
Figures
Figure 1-1: Standard Delay Unit Block Diagram ...................................................................................1-2
Figure 1-2: Delay Unit with HD40 option (Embedded Audio Mode) Block Diagram..............................1-2
Figure 2-1: Rear Panel Layout..............................................................................................................2-1
Figure 2-2: General Purpose I/O Schematic.........................................................................................2-9
Figure 2-3: Powering the General Purpose Input Opto-Isolators from the HDSD9545DLY-PRO....... 2-10
Figure 2-4: Powering the General Purpose Input Opto-Isolators from an External Power Supply......2-10
Figure 3-1: Front Panel Layout..............................................................................................................3-1
Figure 3-2: Operational Overview .........................................................................................................3-3
Figure 3-3: Overview of the Setup Menu...............................................................................................3-4
Figure 3-4: Transition Activation Example.............................................................................................3-9
Tables
Table 2-1: Remote CTL Port Pin Definitions.........................................................................................2-3
Table 2-2: GPI/O Port Pin Definitions....................................................................................................2-4
Table 2-3: Video Input Formats.............................................................................................................2-5
Table 2-4. Standard RJ45 Wiring Color Codes.....................................................................................2-7

HDSD9545DLY - PRO Profanity Bypass Delay Manual
iv Revision 1.3.7 CONTENTS
This page left intentionally blank