evertz 570ASI-X19-10GE2 User manual

570ASI-X19-10GE2 Series
User Manual
© Copyright 2020
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone: [phone]
Sales: [e-mail] Fax: [phone]
Tech Support: [e-mail] Fax: [phone]
Web Page: http://www.evertz.com
Version 1.0, March 2020
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of
purchasers of the 570ASI–X19-10GE2 series product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than
the operation of the 570ASI–X19-10GE2 series product. Due to on going research and development, features and specifications in this manual
are subject to change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of
this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC –
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONN
ECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used.
EN60065
Safety
EN504192 2005
Waste electrical products should not be
disposed of with household waste.
Contact your Local Authority for recycling
advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity

570ASI–X19-10GE2 Series
User Manual
Page - i
REVISION HISTORY
REVISION
DESCRIPTION
DATE
1.0
First Release
Mar 2020
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor
for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning
performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The
only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order
confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no
warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or
order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If
you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make
changes in equipment design or specifications.

570ASI–X19-10GE2 Series
User Manual
Page - ii
This page left intentionally blank

570ASI–X19-10GE2 Series
User Manual
TABLE OF CONTENTS Page - iii
TABLE OF CONTENTS
1. OVERVIEW ...................................................................................................................................1
2. SPECIFICATIONS.........................................................................................................................3
2.1. SERIAL DIGITAL VIDEO......................................................................................................3
2.2. SERIAL VIDEO/ASI INPUT ..................................................................................................3
2.3. IP INPUT...............................................................................................................................3
2.4. SERIAL VIDEO/ASI OUTPUT...............................................................................................3
2.5. IP OUTPUT ...........................................................................................................................3
2.6. ELECTRICAL .......................................................................................................................4
2.7. ENCLOSURES .....................................................................................................................4
2.8. ORDERING INFORMATION.................................................................................................4
2.9. ORDERING OPTIONS..........................................................................................................4
2.10. SFP MODULES ....................................................................................................................4
3. GETTING STARTED .....................................................................................................................5
3.1. FRONT PLATE .....................................................................................................................5
3.2. BACK PLATE .......................................................................................................................5
3.3. CARE AND HANDLING OF OPTICAL FIBER......................................................................6
3.4. HARDWARE INSTALLATION ..............................................................................................6
4. WEB INTERFACE .........................................................................................................................7
4.1. SYSTEM ...............................................................................................................................9
4.1.1. Control Port Configuration .......................................................................................10
4.1.2. Data Port Configuration ...........................................................................................10
4.1.3. Data Port Monitor.....................................................................................................10
4.1.4. SFP Monitor.............................................................................................................10
4.1.5. Temperature Monitor ...............................................................................................11
4.1.6. Configuration Management......................................................................................11
4.1.7. Card Control ............................................................................................................12
4.1.8. Genlock ...................................................................................................................12
4.1.9. RPC Control ............................................................................................................12
4.2. PRODUCT FEATURES ......................................................................................................12
4.3. IP INPUT CONTROL ..........................................................................................................13
4.3.1. MPPM Control .........................................................................................................14
4.3.2. Stream Selection .....................................................................................................14
4.3.3. SMPTE 2110 & 2022-6 Receiving Buffer Mode .......................................................14
4.3.4. Input SFP Port Selection..........................................................................................14
4.3.5. IP Input Settings ......................................................................................................14
4.3.6. Audio Group 1-4 IP Input .........................................................................................17
4.3.7. ANC IP Input............................................................................................................17
4.3.8. IP Packet Monitor ....................................................................................................17
4.3.9. Drop Count Clear.....................................................................................................17

570ASI–X19-10GE2 Series
User Manual
Page - iv
4.4. DIN INPUT CONTROL ....................................................................................................... 18
4.4.1. Input Monitoring ...................................................................................................... 18
4.5. PTP AND MASTER PCR CONTROL................................................................................. 19
4.5.1. PTP and Master PCR Control ................................................................................. 19
4.5.2. PTP Control ............................................................................................................ 20
4.5.3. Master PCR Control ................................................................................................ 20
4.6. IP OUTPUT CONTROL ...................................................................................................... 21
4.6.1. Configuration........................................................................................................... 22
4.6.2. ASI IP Output Control.............................................................................................. 22
4.6.3. Uncompressed IP Output Control............................................................................ 23
4.6.4. Audio Groups 1-4.................................................................................................... 23
4.6.5. ANC ........................................................................................................................ 23
4.6.6. SMPTE 2110 RTP Payload Type ............................................................................ 23
4.7. DIN OUTPUT CONTROL ................................................................................................... 24
4.7.1. Output Control......................................................................................................... 24
4.7.2. Phase Adjustment................................................................................................... 24
4.8. SYSTEM NOTIFY............................................................................................................... 25
4.8.1. System Monitoring Control ...................................................................................... 25
4.8.2. Board Notify ............................................................................................................ 25
4.8.3. Port Link Notify........................................................................................................ 25
4.9. ASI INPUT NOTIFY............................................................................................................ 26
4.9.1. ASI Input Alarm Control .......................................................................................... 26
4.9.2. ASI Input Notification............................................................................................... 26
4.10. IP INPUT NOTIFY .............................................................................................................. 27
4.10.1. IP Input Notify Controls ........................................................................................... 27
4.10.2. IP Input Notifications ............................................................................................... 27
4.11. SNMP SETUP .................................................................................................................... 28
4.11.1. SNMPv1 Trap Destinations ..................................................................................... 28
5. FIRMWARE UPGRADE.............................................................................................................. 29
5.1. FIRMWARE UPGRADE USING WEBEASY®.................................................................... 29

570ASI–X19-10GE2 Series
User Manual
TABLE OF CONTENTS Page - v
Figures
Figure 3-1: 570ASI–X19-10GE2 Front (Left) and Rear Plate (Right)............................................................... 5
Figure 4-1: WebEASY®- Login Menu .............................................................................................................. 7
Figure 4-2: WebEASY®- Top Navigation Bar .................................................................................................. 7
Figure 4-3: WebEASY®- Side Menu ................................................................................................................ 8
Figure 4-4: WebEASY®- System (Part 1 of 2) ................................................................................................. 9
Figure 4-5: WebEASY®- System (Part 2 of 2) ............................................................................................... 11
Figure 4-6: WebEASY®- System / Card Control............................................................................................ 12
Figure 4-7: WebEASY®- Product Features ................................................................................................... 12
Figure 4-8: WebEASY®- IP Input Control (Part 1 of 2) .................................................................................. 13
Figure 4-9: WebEASY®- IP Input Control (Part 2 of 2) .................................................................................. 16
Figure 4-10: WebEASY®- DIN Input Control ................................................................................................. 18
Figure 4-11: WebEASY®- PTP and Master PCR Control.............................................................................. 19
Figure 4-12: WebEASY®- IP Output Control ................................................................................................. 21
Figure 4-13: WebEASY®- DIN Output Control .............................................................................................. 24
Figure 4-14: WebEASY®- System Notify ....................................................................................................... 25
Figure 4-15: WebEASY®- ASI Input Notify .................................................................................................... 26
Figure 4-16: WebEASY®- IP Input Notify....................................................................................................... 27
Figure 4-17: WebEASY®- SNMP Setup ........................................................................................................ 28
Figure 5-1: WebEASY®- Upgrade Button on Top Menu Bar ......................................................................... 29
Figure 5-2: WebEASY®- Firmware Upgrade Menu ....................................................................................... 29
Figure 5-3: WebEASY®- Firmware Upgrade Menu ....................................................................................... 30

570ASI–X19-10GE2 Series
User Manual
Page - vi
This page left intentionally blank

570ASI–X19-10GE2 Series
User Manual
Page - 1
1. OVERVIEW
The 570ASI–X19-10GE2 platform is a complete solution to concurrently convert SDI to SMPTE ST
2022–6/2110, SMPTE ST 2022–6/2110 to SDI*, ASI to IP and IP to ASI.
The 570ASI–X19-10GE2 is a high density, high performance encap/de–encapsulator. With a truly
unique and flexible design, the 570ASI–X19-10GE2 supports a variety of operating modes depending
on the APP loaded.
570ASI–APP–ASI: This APP enables 10x ASI to IP and 10x IP to ASI conversions concurrently. Up to
2x 10GbE ports are utilized and customers have the option of selecting any of the 2 ports to
input/output IP streams.
570ASI–APP–IPG: This APP enables 6x6 conversions of SDI to SMPTE ST 2022–6/2110, SMPTE ST
2022–6/2110 to SDI*, ASI to IP and IP to ASI. Up to 6x 10GbE ports can be utilized and customers
have the option of selecting any of the 6 ports to input/output IP streams.
The 570ASI–X19-10GE2 supports hitless merge for both compressed and uncompressed streams. It
also supports main and backup outputs.
The 570ASI–X19-10GE2 can be managed via integrated HTTP web interface as well as SNMP
management via Frame controller.
Features & Benefits
•High Density conversions
•On-the-fly per-port configuration
•SMPTE ST 2110/2022–6 conversions
*Must order 570ASI–FK–FSE

570ASI–X19-10GE2 Series
User Manual
Page - 2
This page left intentionally blank

570ASI–X19-10GE2 Series
User Manual
Page - 3
2. SPECIFICATIONS
2.1. SERIAL DIGITAL VIDEO
Standards: SMPTE ST 424M (3Gb/s),
SMPTE ST 292M (1.5Gb/s),
SMPTE ST 259M (270Mb/s)
SMPTE ST 2022–6
2.2. SERIAL VIDEO/ASI INPUT
Number of Inputs:
570ASI–APP–ASI: 10x ASI
570ASI–APP–IPG: 6x SDI/ASI
Connector: DIN
Input Equalization: Automatic to 100m @ 3 Gb/s,
150m @ 1.5 Gb/s,
350m @ 270 Mb/s
Return Loss: > 15dB up to 0.5 GHz,
> 10dB up to 3 GHz
2.3. IP INPUT
Ethernet Interface:
570ASI–APP–ASI: 2x 10GbE SFP/SFP+
570ASI–APP–IPG: 6x 10GbE SFP/SFP+
Encapsulation: MPEG–2 TS over IP
Uncompressed: SMPTE ST 2022–6, ST 2110
2.4. SERIAL VIDEO/ASI OUTPUT
Number of Outputs:
570ASI–APP–ASI: 10x ASI
570ASI–APP–IPG: 6x SDI
Connector: DIN
Rise and Fall Time: Per SMPTE spec
2.5. IP OUTPUT
Ethernet Interface:
570ASI–APP–ASI: 2x 10GbE SFP/SFP+
570ASI–APP–IPG: 6x 10GbE SFP/SFP+
Ethernet/IP Signaling: Multicast IGMP V2/V3 (SSM Support)

570ASI–X19-10GE2 Series
User Manual
Page - 4
2.6. ELECTRICAL
Power: 90W
Voltage: 12VDC
EMI/RFI: Complies with FCC Part 15,
Class A EU EMC directive
2.7. ENCLOSURES
570FR: 3RU chassis
S570FR: 1RU chassis
2.8. ORDERING INFORMATION
570ASI–X19: Bulk IP/ASI media processor, up to 12x 10GbE interfaces
using SFP+ cages (SFPs sold separately). A 570ASI–APP
must be purchased with each card.
2.9. ORDERING OPTIONS
570ASI–APP–ASI: 570ASI–X19 App to enable 10x ASI in and 10x ASI out
IP Gateway, up to 2x 10GbE ports
570ASI–APP–IPG: 570ASI–X19 App to enable 6x6 conversions of SDI, ASI,
SMPTE ST 2022–6 and ST 2110, up to 10x 10GbE ports
2.10. SFP MODULES
SFPTR–RJ45–SGM–AV 1GbE electrical SFP

570ASI–X19-10GE2 Series
User Manual
Page - 5
3. GETTING STARTED
Figure 3-1: 570ASI–X19-10GE2 Front (Left) and Rear Plate (Right)
3.1. FRONT PLATE
The front of the 570ASI–X19-10GE2 is equipped with 12x SFPs ports capable of passing 10Gb of data
per port.
3.2. BACK PLATE
The rear plate of the 570ASI–X19-10GE2 is equipped with 20 Mini-Din connectors. The first 18 are
3G/HD/SD bidirectional on the fly configurable copper coax ports and the last 2 are currently not used.

570ASI–X19-10GE2 Series
User Manual
Page - 6
3.3. CARE AND HANDLING OF OPTICAL FIBER
The transmission characteristics of the fiber are dependent on the shape of the optical core and
therefore care must be taken to prevent fiber damage due to heavy objects or abrupt fiber bending.
Evertz recommends that the user maintains a minimum bending radius of 5 cm to avoid fiber bending
loss that will decrease the maximum attainable distance of the fiber cable.

Note:Never touch the end face of an optical fiber. Always keep dust caps on optical fiber
connectors when not connected and always remember to properly clean the optical end
face of a connector before making a connection.
3.4. HARDWARE INSTALLATION
To successfully install the 570ASI–X19-10GE2, the following is required:
1. 570 Series Frame
2. 570 Frame Controller
3. Web browser connected to the 570FC frame controller with 570ASI–X19-10GE2 installed in
frame
Before handling the card, it is important to minimize the potential effects of static electricity. It is
therefore recommended that an ESD strap be worn.
Locate 2 adjacent vacant slots on the chassis. Unpack the 570ASI–X19-10GE2 and separate the rear
panel from the main card. Locate on the rear of the rack the two slots and remove the blanking panels.
Insert the rear panel into the back of the chassis and secure using the four screws provided.
Now insert the 570ASI–X19-10GE2 card into the corresponding front slots ensuring the card lines up
with the slot runners on the bottom and the top of the chassis. Push the card firmly into the slot
ensuring that when it mates with the rear card it has been firmly pushed into a seated position. The
card is secured to the frame with two thumb screws on the front. Hand tighten the thumb screws
instead of using a screw driver to avoid over tightening.
This procedure can be completed on all the other modules. The cards are hot swappable allowing for
the frame to be powered on while installing.

570ASI–X19-10GE2 Series
User Manual
Page - 7
4. WEB INTERFACE
After the card has been installed and configured with the required network addresses for the control
ports, it can be completely configured using the web interface. To do this, simply type in the IP address
of the Control Port on the 570ASI–X19 module in the web browser.

Note:We are assuming that the 570FR or S570FR frame is connected to the network
and the computer is able to communicate to the frame on the Control Port IP address of
the 570ASI–X19
Figure 4-1: WebEASY®- Login Menu
For login and password, type in “customer”.
Upon entering the correct credentials, the user will be directed to the main User Interface that displays
display the following information:
Figure 4-2: WebEASY®- Top Navigation Bar
•Top Navigation Bar
oProduct Name: Displays the product Name
oRefresh: Manually refreshes the user’s configuration
oAuto Refresh: Automatically refreshes the user’s configuration
oApply: Manually saves the user’s configuration
oDynamic Apply: Automatically saves the user’s configuration
oUpgrade: Upgrade the Firmware’s version of the product
oLogout: Logs the user out of the User Interface
570ASI-X19-10GE2
570ASI-X19-10GE2

570ASI–X19-10GE2 Series
User Manual
Page - 8
Figure 4-3: WebEASY®- Side Menu
•Side Menu: Displays a menu of all tabs the user is able to monitor/configure.
•Main Tab: Middle section of the interface, displays all the fields for the item selected from the
side menu. These menu tabs and fields will be fully described in the following
sections.

Note:
Due to the size of the certain menu tabs, screen tab images will be broken into
multiple images.

570ASI–X19-10GE2 Series
User Manual
Page - 9
4.1. SYSTEM
Figure 4-4: WebEASY®- System (Part 1 of 2)

570ASI–X19-10GE2 Series
User Manual
Page - 10
4.1.1. Control Port Configuration
For Eth0 or USB0
MAC Address: This field displays the MAC Address of the 570ASI–X19-10GE2.
IP Address: This field allows the user to enter the IP address to be assigned to control port of the
570ASI–X19-10GE2.
Netmask Address: This field allows the user to enter the Netmask address for the device control port.
4.1.2. Data Port Configuration
For SFPP 1-6
IP Address: This parameter allows the user to set the data port’s IP address.
Netmask: This parameter allows the user to set the data port’s Netmask.
Gateway: This parameter allows the user to set the data port’s Gateway.
4.1.3. Data Port Monitor
For SFPP 1-6
Port Link Status:This field displays the link status of the port.
Received Data Ethernet Total Bitrate:This field displays the total bitrate (in Kbps) that has been
received.
Transmitted Data Ethernet Total Bitrate:This field displays the total bitrate (in Kbps) that has been
transmitted.
Rx Frame Count:Counter for good frames received on the trunk.
Rx CRC Error Frame Count:Counter for CRC Error frames received on the trunk.
Rx Undersized Frame Count:Counter for undersized frames received on the trunk.
Rx Oversized Frame Count:Counter for oversized frames received on the trunk.
Tx Frame Count:Counter for good frames transmitted on the trunk.
Tx Oversized Frame Count:Counter for oversized frames transmitted on the trunk.
4.1.4. SFP Monitor
For SFPP 1-6
SFP Part Number: This parameter shows the part number of SFP model installed.
SFP Type: This parameter shows the type of SFP installed.
SFP Rx Power level: This parameter shows the SFP’s received power level.
SFP Tx Power level: This parameter shows the SFP’s transmitted power level.