evertz 3067VIP-3G-36x4 User manual

3067VIP-3G-36x4
Next Generation Quad Outputs, Compact Multi-Image
Display Processors
User Manual
© Copyright 2020
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone: [phone]
Sales: [e-mail] Fax: [phone]
Tech Support: [e-mail] Fax: [phone]
Web Page: http://www.evertz.com
Version 1.0, February 2020
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of
purchasers of the 3067VIP-3G series product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the
operation of the 3067VIP-3G series product. Due to on going research and development, features and specifications in this manual are subject to
change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of
this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC – SHOCK, DO NOT EXPOSE THIS APPARA
TUS
TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used.
EN60065
Safety
EN504192 2005
Waste electrical products should not be
disposed of with household waste.
Contact your Local Authority for recycling
advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity

3067VIP-3G-36x4
User Manual
Revision 1.0 Page - i
TABLE OF CONTENTS
1. OVERVIEW ...................................................................................................................................1
2. TECHNICAL SPECIFICATIONS ...................................................................................................3
2.1. SERIAL VIDEO INPUTS.......................................................................................................3
2.2. DISPLAY VIDEO OUTPUT...................................................................................................3
2.3. SERIAL VIDEO OUTPUT .....................................................................................................3
2.4. RISE AND FALL TIME..........................................................................................................3
2.5. GENLOCK INPUT.................................................................................................................3
2.6. ETHERNET...........................................................................................................................3
2.7. ELECTRICAL .......................................................................................................................4
2.8. MONITORING OPTIONS......................................................................................................4
3. GETTING STARTED.....................................................................................................................5
3.1. REAR PLATE DESCRIPTION..............................................................................................5
3.2. HARDWARE INSTALLATION..............................................................................................6
3.3. SETTING UP INITIAL NETWORK CONFIGURATION .........................................................6
4. WEB INTERFACE.........................................................................................................................9
4.1. SYSTEM TAB.....................................................................................................................10
4.1.1. Control Port Control (must reboot in order for new settings to take effect) ...............10
4.1.2. Reference Monitoring...............................................................................................11
4.1.3. Temperature............................................................................................................11
4.1.4. License Control........................................................................................................11
4.1.5. Product Features.....................................................................................................12
4.1.6. Trap Control.............................................................................................................12
4.1.7. Security Control.......................................................................................................12
4.1.8. Global Time Control.................................................................................................13
4.2. SYSTEM TIME MANAGEMENT .........................................................................................13
4.2.1. Time Management...................................................................................................13
4.3. INPUT PROPERTIES CONTROL.......................................................................................14
4.3.1. Global Control..........................................................................................................15
4.3.2. Input Settings Control ..............................................................................................15
4.3.3. Input Video Properties .............................................................................................15
4.3.4. Input Audio Properties .............................................................................................16
4.4. INPUT MONITOR................................................................................................................17
4.4.1. Input Monitor............................................................................................................17
4.4.2. Input Video Monitor..................................................................................................18
4.5. OUTPUT CONTROL...........................................................................................................19
4.5.1. Output Control.........................................................................................................20
4.5.2. Output Control.........................................................................................................21
4.5.3. Output Audio Control...............................................................................................21

3067VIP-3G-36x4
User Manual
Page - ii Revision 1.0
4.6. UMD CONTROL.................................................................................................................21
4.6.1. UMD Proxy Control.................................................................................................22
4.7. SYSTEM NOTIFY...............................................................................................................22
4.7.1. Global Control.........................................................................................................22
4.7.2. Temperature Notify .................................................................................................23
4.8. VIDEO NOTIFY..................................................................................................................23
4.8.1. Global Control.........................................................................................................24
4.8.2. Video Notify.............................................................................................................24
4.9. AUDIO NOTIFY..................................................................................................................25
4.9.1. Global Control.........................................................................................................25
4.9.2. Audio Monitoring Control (1) ...................................................................................26
4.9.3. Audio Monitoring Control (2) ...................................................................................27
4.9.4. Audio Notify.............................................................................................................29
4.10. ADVANCED NOTIFY CONTROL....................................................................................... 30
4.10.1. Global Control.........................................................................................................30
4.10.2. Picture Level Control...............................................................................................30
4.10.3. CC Control..............................................................................................................32
4.10.4. TXT Control.............................................................................................................32
4.10.5. Nielsen Control .......................................................................................................33
4.10.6. EIA 708 Control.......................................................................................................35
4.10.7. ANC Control............................................................................................................36
4.10.8. Video Control..........................................................................................................38
4.10.9. GPI Control.............................................................................................................39
4.11. ADVANCED NOTIFY.........................................................................................................40
4.11.1. Global Control.........................................................................................................41
4.11.2. Advanced Notify......................................................................................................41
4.12. ADVANCED AUDIO NOTIFY.............................................................................................41
4.12.1. Global Control.........................................................................................................42
4.12.2. Advanced Audio Notify Control................................................................................42
4.12.3. Audio Loudness Monitoring Control ........................................................................43
4.12.4.Audio Loudness Monitoring.....................................................................................44
4.12.5. Audio Loudness Notify............................................................................................46
4.13. THUMBNAIL CONTROL....................................................................................................46
4.13.1. Thumbnail Control...................................................................................................46
4.13.2. Thumbnail Control...................................................................................................47
4.13.3. Thumbnail Input Properties Control.........................................................................47
4.14. ADVANCED INPUT NOTIFY..............................................................................................48
4.14.1. Advanced Input Notify (1)........................................................................................49
4.14.2. Advanced Input Notify (2)........................................................................................49
4.14.3. Timecode GPI Control.............................................................................................51
4.14.4. SCTE 104 Control:..................................................................................................51

3067VIP-3G-36x4
User Manual
Revision 1.0 Page - iii
4.15. GPIO CONTROL.................................................................................................................51
5. FIRMWARE UPGRADE ..............................................................................................................53
5.1. FIRMWARE UPGRADE USING WEBEASY®.....................................................................53
Figures
Figure 1-1: 3067VIP-3G-36x4 Block Diagram................................................................................2
Figure 3-1: 3067VIP-3G-36x4 Rear Panel .....................................................................................5
Figure 3-2: COM Port – Serial Port Settings ..................................................................................6
Figure 3-3: Serial Port – Network Setup Menu...............................................................................7
Figure 4-1: WebEASY®- Login Menu ............................................................................................9
Figure 4-2: WebEASY®- System Tab - Part 1 .............................................................................10
Figure 4-3: WebEASY®- System Tab - Part 2 .............................................................................12
Figure 4-4: WebEASY®- System Time Management...................................................................13
Figure 4-5: WebEASY®- Input Properties Control - Part 1...........................................................14
Figure 4-6: WebEASY®- Input Properties Control - Part 2...........................................................16
Figure 4-7: WebEASY®- Input Monitor - Part 1............................................................................17
Figure 4-8: WebEASY®- Input Monitor - Part 2............................................................................17
Figure 4-9: WebEASY®- Output Control......................................................................................19
Figure 4-10: WebEASY®- UMD Control ......................................................................................21
Figure 4-11: WebEASY®- System Notify.....................................................................................22
Figure 4-12: WebEASY®- Video Notify........................................................................................23
Figure 4-13: WebEASY®- Audio Notify - Part 1 ...........................................................................25
Figure 4-14: WebEASY®- Audio Notify - Part 2 ...........................................................................26
Figure 4-15 : WebEASY®- Audio Notify - Part 3 ..........................................................................28
Figure 4-16: WebEASY®- Advanced Notify Control - Part 1 ........................................................30
Figure 4-17: WebEASY®- Advanced Notify Control - Part 2 ........................................................32
Figure 4-18: WebEASY®- Advanced Notify Control - Part 3 ........................................................33
Figure 4-19: WebEASY®- Advanced Notify Control - Part 4 ........................................................35
Figure 4-20: WebEASY®- Advanced Notify Control - Part 5 ........................................................36
Figure 4-21: WebEASY®- Advanced Notify Control - Part 6 ........................................................38
Figure 4-22: WebEASY®- Advanced Notify.................................................................................41
Figure 4-23: WebEASY®- Advanced Audio Notify - Part 1...........................................................41
Figure 4-24: WebEASY®- Advanced Audio Notify - Part 2...........................................................42
Figure 4-25: WebEASY®- Advanced Audio Notify - Part 3...........................................................43
Figure 4-26: WebEASY®- Advanced Audio Notify - Part 4...........................................................45
Figure 4-27: WebEASY®- Thumbnail Control..............................................................................46
Figure 4-28 : WebEASY®- Advanced Input Notify - Part 1...........................................................48
Figure 4-29 : WebEASY®- Advanced Input Notify - Part 2...........................................................50
Figure 4-30 : WebEASY®-GPIO Control......................................................................................51
Figure 5-1: WebEASY®- Upgrade Button on Top Menu Bar........................................................53
Figure 5-2: WebEASY®- Firmware Upgrade Menu......................................................................54
Figure 5-3: WebEASY®- Firmware Upgrade Menu......................................................................54

3067VIP-3G-36x4
User Manual
Revision 1.0 Page - iv
REVISION HISTORY
REVISION
DESCRIPTION
DATE
1.0
First Release
Feb 2020
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor
for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning
performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The
only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order
confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no
warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or
order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If
you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make
changes in equipment design or specifications.

3067VIP-3G-36x4
User Manual
Revision 1.0 Page - 1
1. OVERVIEW
3067VIP–3G–36x4 is the most advanced high density multi–image display processor technology
available. It supports SD, HD and 3G/s SDI inputs and up to quad unique display outputs. 3067VIP–
3G–36x4 offers seamless UHD input (no visible quadrant) monitoring and natively drives UHD displays.
Each 3067VIP–3G–36x4 input can be displayed in any size, position or aspect ratio on any display.
The 3067VIP–3G–36x4 provides the best quality input reproduction; it leverages the same video
processing technology as Evertz conversion products.
The 3067VIP–3G–36x4 is a hot–swappable device, which can reside in any Evertz EMX series frame
available in 1RU, 3RU and 6RU, with optional redundant power supplies. This allows high density I/O
count per RU. The 3067VIP–3G–36x4 is VistaLink enabled offering remote monitoring, control and
configuration capabilities via SNMP. The 3067VIP–3G–36x4 is easily configurable via the web
interface. Layout can be designed in a live control environment using a VUE–WEB (web browser). Key
features include automatic aspect ratio adjustment per source basis, graticule generation, VITC/HD
time code decode, cc decode/burn–in and more.
Features & Benefits
•Accepts 36 inputs with embedded audio Auto sensing SD, HD and 3 Gbps inputs
•Supports quad square division UHD inputs stitching and also supports monitoring of
independent 2SI quadrant
•Supports up to x8 UHD inputs simultaneously.
•Supports dual UHD (3840x2160) outputs or quad outputs up to 1920x1200 resolution
•Best image quality in industry
•Allows full screen viewing of any input on any output
•Supports for dynamic under monitoring displays (UMD) and tallies from router and switcher
•Supports advanced on screen graphics, including analog clock, transparency control of objects,
raised bezels and borders, custom background, custom logo per display
•Supports TrueType fonts including non-Latin alphabets
•Built-in graticule generator, user defined per window
•Enables the decoding and display of VITC/ATC (SMPTE ST 12-1, 12M-2) time code
•Audio, video and data fault monitoring with on screen fault notification
•Vistalink capable for configuration and monitoring via SNMP
•One frame processing delay
•Real time control of display output via web based layout design tool (VUE-WEB)
•Decoding and burn-in of 608 and 708 captions as well as Teletext
•Monitoring of the full 16 channels of embedded audio per input
•Loudness monitoring per ITU 1770, ATSC A/85 and EBU R 128
•Dolby E audio monitoring with surround sound bar graph (one per input)

3067VIP-3G-36x4
User Manual
Page - 2 Revision 1.0
Figure 1-1: 3067VIP-3G-36x4 Block Diagram

3067VIP-3G-36x4
User Manual
Revision 1.0 Page - 3
2. TECHNICAL SPECIFICATIONS
2.1. SERIAL VIDEO INPUTS
Standards:3Gb/s (SMPTE 424M/424M-AB)
HD-SDI (SMPTE ST 292-1), and/or
SD-SDI (SMPTE ST 259-C)
Number of Inputs: 36
Connector: Mini Din 1.0/2.3 connector
Equalization:
SD-SDI: Automatic to 200m @ 270 Mb/s with Belden 1694A (equiv.)
HD-SDI: Automatic to 100m @ 1.5 Gb/s with Belden 1694A (equiv.)
3G: Automatic to >50m @ 3 Gb/s with Belden 1694A (equiv.)
Return Loss: >15dB up to 1.5 Gb/s
Embedded Audio: SMPTE ST 272-A, ST 299-1
2.2. DISPLAY VIDEO OUTPUT
Standard:HDMI 2.0
Resolutions: Up to 4 output at 1920x1200 or
2 output at UHD (3840x2160)
Number of Outputs: Up to 4
Connector: HDMI
2.3. SERIAL VIDEO OUTPUT
Standard:3G/HD/SD best fit based on resolution selected (3G, 1080i, 720p,
625, 525). Support dual UHD output square division or 2SI
Number of Outputs: 8 (maximum 4 unique outputs)
Connector: Mini Din 1.0/2.3 connector
Signal Level: 800mV nominal
DC Offset: 0V ± 0.5V
2.4. RISE AND FALL TIME
HD:200ps nominal
SD:740ps nominal
Overshoot:<10% of amplitude
2.5. GENLOCK INPUT
Type:NTSC/PAL color black
Level:1V p-p nominal
Connector: Uses EMX6-FR, EMX3-FR or EMX1-FR frame gunlock BNC
2.6. ETHERNET
Network Type:Fast Ethernet 100 Base-TX IEEE 802.3U standard for 100Mbps
baseband CSMA/CD local area network
Connector:Via EMX frame controller

3067VIP-3G-36x4
User Manual
Page - 4 Revision 1.0
ELectrical
Voltage:+12VDC
Power: 130W
EMI/RFI: Complies with FCC Part 15, Class A EU EMC Directive
Physical (number of slots): 2
2.7. MONITORING OPTIONS
•+SM
Standard AVM monitoring audio: low/high/loss
Video: black/frozen/loss
•+MCR
Dolby E audio monitoring, Loudness monitoring, CC/Teletext subtitle
decode/monitoring, VANC data monitoring. Includes +SM monitoring features

3067VIP-3G-36x4
User Manual
Revision 1.0 Page - 5
3. GETTING STARTED
3.1. REAR PLATE DESCRIPTION
Figure 3-1: 3067VIP-3G-36x4 Rear Panel

3067VIP-3G-36x4
User Manual
Page - 6 Revision 1.0
3.2. HARDWARE INSTALLATION
NOTE: SFP’s must be ordered separately
To successfully install the 3067VIP-3G-36x4 you will require the following:
1. EMX1, EMX3 or EMX6 frame with EMX-FC frame controller installed.
2. Frame controller connected to the VistaLINK® PRO Server IP address.
3. Two empty slots in the frame
4. Evertz Serial Ribbon Cable
Before handling the card it is important to minimize the potential effects of static electricity. It is
therefore recommended that an ESD strap be worn.
Locate on the chassis 2 adjacent vacant slots. Unpack the 3067VIP-3G-36x4 and separate the rear
panel from the main card. Insert the rear panel into the back of the chassis and secure using the
screws provided. Once rear panel is secured, slide in module along the slot runners and mate into the
rear panel. Take care to make sure card ejectors are partially open when sliding in module and closed
tight when secured.
3.3. SETTING UP INITIAL NETWORK CONFIGURATION
The 3067VIP-3G-36x4 module requires a first time initialization to set up proper network parameters.
Procedure
1. Connect the Evertz serial upgrade cable (ribbon cable) to the 2x3 header at the front edge of the
3067VIP-3G-36x4 card.
2. Start a terminal program and configure the port settings.
Figure 3-2: COM Port – Serial Port Settings

3067VIP-3G-36x4
User Manual
Revision 1.0 Page - 7
3. Boot up module, a login prompt will appear, enter:
•“customer” for user name <Enter>
•“customer” for password <Enter>
4. Once logged in, we will be configuring the network settings.
•Select <1> for the Network Setup menu.
5. In the Network Setup menu, we will be configuring the two control networks.
Figure 3-3: Serial Port – Network Setup Menu
•Set all network configurations for each control network.
•Select <X> to Exit.
6. Once all network settings are completed and exited back to main menu
•Select <X> to Save and Exit.
•Pull module out and push back in to reboot module.

3067VIP-3G-36x4
User Manual
Page - 8 Revision 1.0
This page left intentionally blank

3067VIP-3G-36x4
User Manual
Revision 1.0 Page - 9
4. WEB INTERFACE
Different product licenses will enable different product features. Depending on the product features
enabled, there will be different tabs and controls that will need to be configured. For the purpose of this
manual, we have enabled all product features.
After the card has been installed and configured with the required network addresses for the control
ports, it can be completely configured using the web interface. To do this, simply type in the IP address
of the Control Port on the 3067VIP-3G-36x4 module in the web browser.

It is assumed that the EMX1, EMX3 or EMX6 frame is connected to the network and
the computer is able to communicate to the frame on the Control Port IP address of
the 3067VIP-3G-36x4.
Figure 4-1: WebEASY®- Login Menu
For login and password, type in customer.

Due to the size of the certain menu tabs, we will be breaking up screen tab images
into multiple images. Some of the screen shots will also require the user to zoom in
to see the image more clearly.

3067VIP-3G-36x4
User Manual
Page - 10 Revision 1.0
4.1. SYSTEM TAB
Figure 4-2: WebEASY®- System Tab - Part 1
4.1.1. Control Port Control
*must reboot in order for new settings to take effect
IP Address: This control allows the user to set the IP address on the Control Port. This control will also
display the currently set IP address.
Netmask: This control allows the user to set the Netmask for the Control Port IP address. This control
will also display the currently set Netmask.
Gateway: This control allows the user to set the Gateway for the Control Port. This control will also
display the currently set Gateway address.

3067VIP-3G-36x4
User Manual
Revision 1.0 Page - 11
4.1.2. Reference Monitoring
Reference Status: This monitor displays whether the module is locked or unlocked to reference
Reference Present: This monitor displays whether a genlock signal is present.
Reference Standard: This monitor displays the standard detected for the gunlock reference.
4.1.3. Temperature
Top Area Temperature: This parameter allows the user to verify the top of the FPGA module
temperature. This value is represented in degrees Celsius.
Bottom Area Temperature: This parameter allows the user to verify the bottom of the FPGA module
temperature. This value is represented in degrees Celsius.
CPU Temperature: This temperature allows the user to verify the current temperature of the CPU.
This value is represented in degrees Celsius.
4.1.4. License Control
Product License File: This control is used to select the Product License File or Key that enables
different features on the 3067VIP10G. Once selected, click on “Upload” to download file.
Product Serial Number: This monitor is used to display the Product Serial Number.
Product MAC Address: This monitor is used to display the MAC address of the card.

3067VIP-3G-36x4
User Manual
Page - 12 Revision 1.0
4.1.5. Product Features
This monitor will display the different features enabled on module. These features can be purchased
either separately or with the initial purchase of the 3067VIP card.
Figure 4-3: WebEASY®- System Tab - Part 2
4.1.6. Trap Control
Trap configurations for Control Port 1 and Control Port 2
Trap Port Select: This control selects the port to be used for sending SNMP traps. Selections are
Auto, Port 1, Port 2 or Port 1 and 2
Trap Destination IP Address: This control is used to configure five SNMP trap destinations for each
control port.
4.1.7. Security Control
FTP Enable: This control allows the user to enable/disable FTP functionality.
Json Rpc TLS Encryption: This control allows the user to enable/disable TLS encryption for JSON-
RPC communication.
Syslog TLS Encryption: This control allows the user to enable/disable TLS encryption for Syslog
communication.
SSL Certificate Upload: To upload an SSL certificate for secure https communication, choose an SSL
certificate file saved to local disk using the ‘choose file’ control followed by the ‘upload’ control.