evertz 3067VIP10G Series User manual

3067VIP10G Series
JPEG2000 Advanced Compact
Multi-Image Display Processors
User Manual
© Copyright 2014
EVERTZ MICROSYSTEMS LTD.
5288 John Lucas Drive,
Burlington, Ontario,
Canada L7L 5Z9
Phone: [phone]
Sales: [e-mail] Fax: [phone]
Tech Support: [e-mail] Fax: [phone]
Web Page: http://www.evertz.com
Version 0.1, July 2014
The material contained in this manual consists of information that is the property of Evertz Microsystems and is
intended solely for the use of purchasers of the 3067VIP10G series products. Evertz Microsystems expressly
prohibits the use of this manual for any purpose other than the operation of the 3067VIP10G series products. Due to
on going research and development, features and specifications in this manual are subject to change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz
Microsystems Ltd. Copies of this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC – SHOCK, DO NOT EXPOSE
THIS APPARATUS
TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables
with the shield connected to the chassis ground of the device must be used.
EN60065
Safety
EN504192 2005
Waste electrical products should not be
disposed of with household waste. Contact
your Local Authority for recycling advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Revision 0.1 Page i
TABLE OF CONTENTS
1. OVERVIEW ...................................................................................................................................1
2. GETTING STARTED.....................................................................................................................3
2.1. REAR PLATE DESCRIPTION..............................................................................................3
2.2. HARDWARE INSTALLATION..............................................................................................3
2.3. CONFIGURING BASIC NETWORK SETTINGS...................................................................4
2.4. CONNECTING TO VLPRO...................................................................................................5
3. TECHNICAL SPECIFICATIONS ...................................................................................................6
3.1. INPUT ...................................................................................................................................6
3.2. OUTPUT ...............................................................................................................................6
3.3. CONNECTIVITY....................................................................................................................6
3.4. GENLOCK INPUT.................................................................................................................6
3.5. ELECTRICAL .......................................................................................................................6
3.6. PHYSICAL............................................................................................................................6
3.7. INPUT & OUTPUT OPTIONS ...............................................................................................6
3.8. MONITORING OPTIONS......................................................................................................6
4. VISTALINKPRO INTERFACE.......................................................................................................7
4.1. SYTEM INFO ........................................................................................................................7
4.2. CONTROL PORT..................................................................................................................8
4.3. DATA PORT .........................................................................................................................9
4.4. ENCODER CONTROL........................................................................................................10
4.5. ENCODER PID CONTROL.................................................................................................12
4.6. ENCODER MUX CONTROL...............................................................................................13
4.7. CONTROL ..........................................................................................................................13
4.8. ENCODER AUDIO CONTROL ...........................................................................................14
5. DECODER CONFIGURATION....................................................................................................15
5.1. DECODER INPUT CONTROL............................................................................................16
5.2. INPUT MONITOR................................................................................................................19
5.3. INPUT PROGRAM MONITOR............................................................................................21
5.4. PROGRAM MONITOR........................................................................................................22
5.5. PROGRAM AUDIO MONITOR ...........................................................................................23
5.6. FAULTS..............................................................................................................................23

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Page ii Revision 0.1
5.7. INPUT FAULTS..................................................................................................................24
5.8. AUDIO FAULTS.................................................................................................................24
6. WEB INTERFACE ......................................................................................................................25
6.1. SYSTEM.............................................................................................................................25
6.1.1. Control Port.............................................................................................................26
6.1.2. Data Port Control for SFP Ports..............................................................................26
6.1.3. Temperature ...........................................................................................................26
6.2. INPUT CONTROL..............................................................................................................27
6.3. INPUT MONITOR...............................................................................................................29
6.4. PROGRAM MONITOR.......................................................................................................30
6.5. OUTPUT CONTROL..........................................................................................................31
6.6. MISC CONTROL................................................................................................................33
6.7. INPUT NOTIFY...................................................................................................................34
6.8. VIDEO NOTIFY..................................................................................................................35
6.9. AUDIO NOTIFY..................................................................................................................36
7. FIRMWARE UPGRADE PROCEDURES....................................................................................37
7.1. VISTALINKPRO UPGRADE PROCEDURE....................................................................... 37
7.2. WEB INTERFACE UPGRADE...........................................................................................38

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Revision 0.1 Page iii
Figures
Figure 1-1: Block Diagram................................................................................................................................2
Figure 2-1: 3067VIP10G Rear SFP Plate ........................................................................................................3
Figure 4-1: System Information Tab.................................................................................................................7
Figure 4-2: Control Port Tab.............................................................................................................................8
Figure 4-3: Data Port Tab.................................................................................................................................9
Figure 4-4: Encoder Control Tab....................................................................................................................10
Figure 4-5: Encoder PID Control Tab.............................................................................................................12
Figure 4-6: MUX Encoder Control Tab...........................................................................................................13
Figure 4-7: Control Tab ..................................................................................................................................13
Figure 4-8: Encoder Audio Control Tab..........................................................................................................14
Figure 5-1: Hardware Tree Pane....................................................................................................................15
Figure 5-2: View Configuration Drop-down menu..........................................................................................15
Figure 5-3: Decoder Input Control Tab...........................................................................................................16
Figure 5-4: Input Monitor Tab.........................................................................................................................19
Figure 5-5: Input Program Monitor .................................................................................................................21
Figure 5-6: Program Monitor Tab...................................................................................................................22
Figure 5-7: Program Audio Monitor Tab.........................................................................................................23
Figure 5-8: Fault Monitor Tab.........................................................................................................................23
Figure 5-9: Input Fault Tab.............................................................................................................................24
Figure 5-10: Audio Faults Tab........................................................................................................................24
Figure 6-1: Web GUI System Tab (1).............................................................................................................25
Figure 6-2: Web GUI System Tab (2).............................................................................................................25
Figure 6-3: Input Control Tab .........................................................................................................................27
Figure 6-4: Input Monitor Tab.........................................................................................................................29
Figure 6-5: Program Monitor Tab...................................................................................................................30
Figure 6-6: Output Control Tab.......................................................................................................................31
Figure 6-7: Misc Control.................................................................................................................................33
Figure 6-8: Input Notify Tab............................................................................................................................34
Figure 6-9: Video Notify Tab...........................................................................................................................35
Figure 6-10: Audio Notify Tab.........................................................................................................................36
Figure 7-1: Version Information Drop-down menu.........................................................................................37
Figure 7-2: Version Information Tab...............................................................................................................37
Figure 7-3: JAR File Selection........................................................................................................................38
Figure 7-4: WEB GUI Upgrade Screen ..........................................................................................................38

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Page iv Revision 0.1
REVISION HISTORY
REVISION DESCRIPTION DATE
0.1 Preliminary Release July 2014
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor
for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning
performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The
only warranty offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order
confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no
warranty is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or
order confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If
you encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make
changes in equipment design or specifications.

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Revision 0.1 Page 1
1. OVERVIEW
The 3067VIP10G offers multiviewer functionality with up to 32 inputs of processing and up to 2 Mosaic
outputs, all via 10G physical interfaces. The 3067VIP10G displays inputs at any size, aspect ratio and
position. 3067VIP10G device accepts JPEG2000 encoded inputs as sources; and encodes the mosaic
output as a JPEG2000 signal over IP.
The 3067VIP10G provides the best quality input reproduction employing the latest in video processing
technology developed by Evertz. The 3067VIP10G is a hot-swappable device which can be populated
in an Evertz EMX6-FR, EMX3-FR, or EMX1-FR frame with an option for redundant power supplies.
The 3067VIP10G is VistaLINK enabled, offering remote monitoring, control and configuration
capabilities via Simple Network Management Protocol (SNMP). The 3067VIP10G is easily configurable
via a web server interface. Layout creation can be performed in a live control environment using Evertz
VUE software.
The 3067VIP10G is built on top of the industry leading 7867VIP product line and inherits key features
such automatic aspect ratio adjustment per source, graticule generation, audio monitoring with level bar
display, signal fault monitoring and under monitoring display.
Used in conjunction with the 3000REM-TX9 and 3080IPX, the 3067VIP10G integrates into a very
flexible infrastructure to harness the many advantages provided by high bandwidth 10GE connectivity.
Features & Benefits
•Support up to 32 JPEG2000 encoded input sources
•Support up to 2 JEG2000 encoded mosaic output
•Uses Evertz next generation image processing technology present on other conversion
products
•Output display resolutions of up to WUXGA (1920x1200) possible
•Full screen view of any input on an output
•Provides support for dynamic under monitor displays and tallies from routers and switchers
•Built-in AVM-Lite monitoring functionality
•Application specific customizable feature sets available as software options
•Minimal processing delay
•Real time control of display outputs via VUE software, and integration with
•VistaLINK Pro, Magnum, VUE, and Mediator software suites.

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Page 2 Revision 0.1
Figure 1-1: Block Diagram

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Revision 0.1 Page 3
2. GETTING STARTED
2.1. REAR PLATE DESCRIPTION
Figure 2-1: 3067VIP10G Rear SFP Plate
SFP+ 1: Data Input/ Display Primary
SFP+ 2: Data Input/Display Redundant (backup)
SFP+ 3: Currently not supported
SFP+ 4: Currently not supported
2.2. HARDWARE INSTALLATION
NOTE: SFP’s must be ordered separately
To successfully install the 3067VIP10G you will require the following:
1. Unused IP address on the network or a DHCP server.
2. VistaLINK® PRO Server IP address.
3. EMX3 or EMX6 Frame
Before handling the card it is important to minimize the potential effects of static electricity. It is
therefore recommended that an ESD strap be worn.
Locate on the chassis 2 adjacent vacant slots. Unpack the 3067VIP10G and separate the rear panel
from the main card. Insert the rear panel into the back of the chassis and secure using the screws

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Page 4 Revision 0.1
provided. Locate on the rear of the rack the two slots and remove the blanking panels. Insert the rear
panel into the back of the chassis and secure using the screws provided.
Now insert the 3067VIP10G card into the corresponding front slots ensuring the card lines up with the
slot runners on the bottom and the top of the chassis. Push the card firmly into the slot ensuring that
when it mates with the rear card it has been firmly pushed into a seated position. Do not connect any
cables to the rear card (failure to do this could cause unwanted network issues) until the initial
configuration has been completed.
Ensure that the device is powered up and the green LED is on. Connect the device via the COM port
using a 9-pin d-type ribbon serial cable, connect the end of the serial cable to the serial port of your PC.
Connect the opposing end to the upgrade port J1 labeled on card. This port is located directly behind
card edge LED panel. In order to begin configurations ensure the below settings are configured
properly:
Baud: 115200
Data: 8-BIT
Parity: none
Stop Bits: 2
Flow Control: none
Open TeraTerm (if using Windows XP or older open Hyper Terminal) to make the required changes to
the IP address on the card. Use the login customer and password customer.
2.3. CONFIGURING BASIC NETWORK SETTINGS
To make changes to the IP address select Network Setup. Set the IP address to the desired subnet as
well as set the Gateway. Make the same changes for the IP address and Gateway of Port 2 as
required. When done Exit (X) the Network Setup and Save and Exit (X) from the Main Menu to ensure
all changes are saved.
Power Cycle the 3067VIP10G to ensure all changes are loaded to the card.

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Revision 0.1 Page 5
2.4. CONNECTING TO VLPRO
This chapter assumes that the VistaLINK®PRO server and client are already configured for your
network and you have basic knowledge of the VistaLINK®PRO interface. It also assumes that the user
or network administrator has already added the appropriate jar file to the server, and both the client and
server applications have been restarted. Please refer to the VistaLINK®PRO manual for instructions on
how to load a jar file.
Open VistaLINK®PRO and click on the refresh tree icon. Expand the hardware tree by clicking on the
“+” button. Your card should appear as a newly listed device with the IP address used to configure the
card. It may take up to a minute to appear while the card and switch negotiate network settings (this
can be verified directly on the switch if necessary). Please note that the 3067VIP10G will identify thirty-
two decoders. The user will be required to individually select each item to configure the appropriate
function.

Note: If after a couple of minutes the card has still not appeared, try selecting
Add Agent from the Tree> Add/Update Agent menu. Enter the IP address and
select OK. The card should now be listed and will remain grayed out for a
moment while VistaLINK®PRO finds the card and confirms its configuration.
Please consult your network administrator if you continue to have problems connecting the card with
VistaLINK®PRO, alternatively contact Evertz Microsystems Ltd. or your authorized reseller for technical
support.

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Page 6 Revision 0.1
3. TECHNICAL SPECIFICATIONS
3.1. INPUT
•Format: JPEG2000
3.2. OUTPUT
•Format: JPEG2000
•Resolution supported: 1080p/59.94, 1080p/50, 720p/59.94 and 720p/50
3.3. CONNECTIVITY
•Number of Connectors: 4
•Connector Type: Female LC/UPC
3.4. GENLOCK INPUT
•NTSC/PAL color black
•Level: 1V p-p nominal
•Connector: uses frame Genlock BNC
3.5. ELECTRICAL
•Voltage: +12V DC
•Power: 80W
•Compliance
oEMI/EFI: Complies with FCC Part 15, Class A EU EMC directive
3.6. PHYSICAL
•Number of slots: 2
3.7. INPUT & OUTPUT OPTIONS
•+32x1: Single JPEG 2000 encoded mosaic output, 32 JPEG 2000 encoded inputs
•+32x2: Dual JPEG2000 encoded mosaic outputs, 32 JPEG 2000 encoded inputs
Maximum of 16 images per display
•+24x1: Single JPEG 2000 encoded mosaic output, 24 JPEG 2000 encoded inputs
•+24x2: Dual JPEG 2000 encoded mosaic outputs, 24 JPEG 2000 encoded inputs
Maximum of 12 images per display
•+16x1: Single JPEG 2000 encoded mosaic output, 16 JPEG 2000 encoded inputs
•+16x2: Dual JPEG 2000 encoded mosaic outputs, 16 JPEG 2000 encoded inputs
Maximum of 8 images per display
•+12x1: Single JPEG 2000 encoded mosaic output, 12 JPEG 2000 encoded inputs
3.8. MONITORING OPTIONS
•+SM: Audio level, fault monitoring and Under monitoring display
•+MCR: Dolby E monitoring, Loudness monitoring, CC/Teletext decode

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Revision 0.1 Page 7
4. VISTALINKPRO INTERFACE
4.1. SYTEM INFO
Figure 4-1: System Information Tab
Product License Key: This parameter displays the product license key
Card Serial Number: This parameter displays the card serial number, which is identical to the card
MIB control number. This value is required to access this device via the Evertz Product Support
Services Webpage.
Card Media Access Control (MAC) Address: This parameter displays the card MAC address.
Product Features: These features can be purchased either separately or with the initial purchase of
the 3067VIP10G card.
Card Type: This parameter simply identifies the actual hardware that has been installed.
Reboot: This parameter enable a soft system reset. To allow for a power cycle of the device a manual
reboot must be performed.

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Page 8 Revision 0.1
4.2. CONTROL PORT
Figure 4-2: Control Port Tab

Note: Both IP addresses use the same physical Network Interface Cards (NICs).
The two IP addresses which are set enable connections to the 3067VIP10G on
two different subnets, using the same physical NIC on the back of the EMX frame
for both IPs.
IP Address: This parameter allows the user to set an IP address for the control port.
NetMask: This parameter allows the user to set the netmask (subnet) for the control port.
Gateway: This parameter allows the user to set the gateway address for the control port.

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Revision 0.1 Page 9
4.3. DATA PORT
Figure 4-3: Data Port Tab
IP Address: This parameter allows the user to set the IP Address.
Netmask/Subnet Address: This parameter allows the user to set the Netmask/Subnet.
Gateway Address: This parameter allows the user to set the Gateway Address.
Received Optical Power: This parameter indicates the received optical power status on the SFP-Rx,
and is measured in 1dBm units. Range for this value can be from -128dB to 128dBm.
Port Link Status: This parameter will indicate the status of the port link as either ‘Up’ or ‘Down’.
Port Link Info: This parameter displays link status (i.e. speed, duplex).
Received Data Ethernet Total Bitrate: This parameter indicates the bit rate received on an Ethernet
Port in kbps. Range for this value can be from 0 to 1000000.
Transmitted Data Ethernet Total Bitrate: This parameter indicates the bit rate transmitted on an
Ethernet Portin kbps. Range for this value can be from 0 to 1000000.
Clear Stats: This parameter allows the user to reset the Ethernet monitored statistics.

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Page 10 Revision 0.1
4.4. ENCODER CONTROL
Figure 4-4: Encoder Control Tab
Output Total Transport Stream (TS) Bit Rate (Kbps) for Output Control: This parameter allows the
user to select the output TS Bitrate, which is expressed in kbps. The Card will adjust the bitrate for
video and other PIDS based on this settings.

Note: 1.) For ENC10bit 4:2:2 H264 range is 0 to 100000
2.) For ENC 8bit 4:2:0 H264 range is 0 to 20000
3.) For ENC J2K range is 0 to 400000
Layout for Output Control: This parameter sets the layout information from the following options: Full
Screen, Mode 2x2, Mode 3x3, Mode 4x4, or Advanced (for use with the Magnum Multiviewer design
tool).
Output Rotation for Output Control: This parameter enables or disables portrait mode for Output
Control. Rotation can be set to the following degrees; 0º, 90º, or 270º.

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Revision 0.1 Page 11
Output Video Bitrate for Output Control: This parameter allows the user to select the output TS
Bitrate, which is expressed in kbps. The Card will adjust the bitrate for video and other PIDS based on
this settings.

Note: 1.) For ENC10bit 4:2:2 H264 range is 0 to 100000
2.) For ENC 8bit 4:2:0 H264 range is 0 to 20000
3.) For ENC J2K range is 0 to 400000
Output IP Address: This parameter allows the user to select output IP address and Multicast address
for the Data Port.
Output UDP Address: This parameter allows the user to set the output UDP port number for the Data
Port. Range for this value can be from 1 to 65535.
Output Time-To-Live (TTL): This parameter allows the user to set TTL field of the IP packets being
sent out of the Data Port. Range for this value can be set from 1 to 128.
Latency Mode Ouput for Advanced Control: This parameter allows the user to change latency on
outputs to either standard, medium, low, or ultra low.

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Page 12 Revision 0.1
4.5. ENCODER PID CONTROL
Figure 4-5: Encoder PID Control Tab
PMT PID: This parameter allows the user to select the PMT PID for the output stream. Range for this
value can be from 16 to 8190.
Video PID: This parameter allows the user to select the Video PID for the output stream. Range for this
value can be from 16 to 8190.
VANC PID: This parameter allows the user to set the PID for VANC data being sent on ENC J2K and
ENC 10bit 4:2:2 H264. Range for this value can be from 16 to 8190.
PCR PID: This parameter allows the user to set the PID for PCR data being sent on ENC J2K and ENC
10bit 4:2:2 H264. Range for this value can be from 16 to 8190.
PID Configuration: This parameter sets the method to configure the PID. If it is pre-defined, then all
PID controls will be greyed out. The second method allows the user to manually configure them.
Audio PID Control Output: This parameter defines the Audio PID for audio 1 through 8, and can
range from 16 to 8190.