evertz 570ACO-X19-10G Series User manual

570ACO-X19-10G Series
Quick Reference Guide
© Copyright 2020
EVERTZ MICROSYSTEMS LTD.
5292 John Lucas Drive
Burlington, Ontario
Canada L7L 5Z9
Phone: [phone]
Sales: [e-mail] Fax: [phone]
Tech Support: [e-mail] Fax: [phone]
Web Page: http://www.evertz.com
Version 1.0, June 2020
The material contained in this manual consists of information that is the property of Evertz Microsystems and is intended solely for the use of
purchasers of the 570ACO-X19-10G series product. Evertz Microsystems expressly prohibits the use of this manual for any purpose other than the
operation of the 570ACO-X19-10G series product. Due to on going research and development, features and specifications in this manual are subject
to change without notice.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz Microsystems Ltd. Copies of this
manual can be ordered from your Evertz dealer or from Evertz Microsystems.

This page left intentionally blank

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (Servicing) instructions in
the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles
and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC – SHOCK, DO NOT EXPOSE THIS APPARATUS
TO
RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

INFORMATION TO USERS IN EUROPE
NOTE
CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to the European Union EMC directive. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
WARNING
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s
authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference. Properly shielded interface cables with
the shield connected to the chassis ground of the device must be used.
EN60065
Safety
EN504192 2005
Waste electrical products should not be
disposed of with household waste.
Contact your Local Authority for recycling
advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity

570ACO-X19-10G Series
Quick Reference Guide
Version 1.0 Page - i
REVISION HISTORY
REVISION
DESCRIPTION
DATE
1.0
First Release
Jun 2020
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for
the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of
Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty offered
by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty is
granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order confirmation.
Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you encounter an error,
please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in equipment design or
specifications.

570ACO-X19-10G Series
Quick Reference Guide
Page - ii Version 1.0
This page left intentionally blank

570ACO-X19-10G Series
Quick Reference Guide
TABLE OF CONTENTS Version 1.0 Page - iii
TABLE OF CONTENTS
1. OVERVIEW ...................................................................................................................................1
2. SPECIFICATIONS.........................................................................................................................3
2.1. SERIAL DIGITAL VIDEO......................................................................................................3
2.2. IP INPUT...............................................................................................................................3
2.3. SERIAL VIDEO OUTPUT .....................................................................................................3
2.4. IP OUTPUT ...........................................................................................................................3
2.5. SWITCHING REFERENCE...................................................................................................3
2.6. ELECTRICAL .......................................................................................................................3
2.7. PHYSICAL ............................................................................................................................4
2.8. ENCLOSURES .....................................................................................................................4
2.9. ORDERING INFORMATION.................................................................................................4
3. GETTING STARTED .....................................................................................................................5
3.1. FRONT PLATE .....................................................................................................................5
3.2. BACK PLATE .......................................................................................................................6
3.3. CARE AND HANDLING OF OPTICAL FIBER......................................................................7
3.4. HARDWARE INSTALLATION ..............................................................................................7
3.5. 570ACO-X19-10G INPUT/OUTPUT MAPPING ....................................................................8
3.5.1. App A Input/output mapping.......................................................................................8
3.5.2. App B Input/output mapping.......................................................................................8
4. WEB INTERFACE .........................................................................................................................9
4.1. SYSTEM TAB .....................................................................................................................11
4.1.1. Control Port Configuration .......................................................................................11
4.1.2. Data Port Configuration ...........................................................................................11
4.1.3. Data Port Monitor.....................................................................................................12
4.1.4. SFP Monitor.............................................................................................................13
4.1.5. External Reference Monitor .....................................................................................13
4.1.6. Genlock Control.......................................................................................................14
4.1.7. Inband Control .........................................................................................................14
4.1.8. RPC Timeout ...........................................................................................................14
4.1.9. Time Management...................................................................................................15
4.1.10. Configuration Management......................................................................................15
4.1.11. Card Control ............................................................................................................15
4.2. PRODUCT FEATURES ......................................................................................................16
4.2.1. Product Features .....................................................................................................16
4.2.2. License Control........................................................................................................16
4.3. ACS CONTROL ..................................................................................................................17
4.3.1. ACS Status ..............................................................................................................17

570ACO-X19-10G Series
Quick Reference Guide
Page - iv Version 1.0
4.3.2. Input Control ............................................................................................................17
4.3.3. Failover Control .......................................................................................................17
4.3.4. Output Control .........................................................................................................18
4.4. ACS CRITERIA...................................................................................................................18
4.4.1. Video Monitoring Control .........................................................................................19
4.4.2. Audio Monitoring Control .........................................................................................20
4.4.3. Audio Monitoring Per Group ....................................................................................21
4.4.4. Audio Monitoring Per Channel .................................................................................21
4.4.5. ANC Monitoring Control...........................................................................................22
4.5. SDI CONTROL ...................................................................................................................23
4.5.1. SDI Output Control ..................................................................................................23
4.5.2. SDI Output Monitoring .............................................................................................23
4.5.3. VPID Monitoring ......................................................................................................24
4.6. VIDEO (S2110-20) IP OUTPUT ..........................................................................................24
4.6.1. IP Output Control.....................................................................................................24
4.6.2. IP Output Advanced Control ....................................................................................25
4.6.3. IP Output Monitoring................................................................................................25
4.7. VIDEO(S2110-20) IP INPUT ...............................................................................................26
4.7.1. Global Control..........................................................................................................26
4.7.2. IP Input Control........................................................................................................26
4.7.3. IP Input Monitoring...................................................................................................27
4.7.4. IP Input IGMP Control..............................................................................................27
4.8. AUDIO (S2110-30) IP OUTPUT ..........................................................................................28
4.9. AUDIO (S2110-30) IP INPUT..............................................................................................29
4.10. ANC (S2110-40) IP OUTPUT..............................................................................................30
4.11. ANC (S2110-40) IP INPUT..................................................................................................30
4.12.PTP CONTROL ..................................................................................................................31
4.12.1. PTP Control.............................................................................................................31
4.12.2. PTP Monitor.............................................................................................................32
4.13. VIDEO NOTIFY...................................................................................................................33
4.14. AUDIO NOTIFY ..................................................................................................................33
4.14.1. Audio Monitoring Control .........................................................................................33
4.14.2. Audio Failover Notify................................................................................................34
4.14.3. Audio Stream Notify.................................................................................................34
4.14.4. Audio Channel Notify ...............................................................................................35
4.15. ANC NOTIFY ......................................................................................................................35
4.16. NOTIFY...............................................................................................................................36
4.16.1. Board Notify.............................................................................................................36
4.16.2. Decapsulator Fault...................................................................................................36
4.16.3. ACS Fault ................................................................................................................36
4.16.4. Clear Faults .............................................................................................................37

570ACO-X19-10G Series
Quick Reference Guide
TABLE OF CONTENTS Version 1.0 Page - v
4.17. SNMP TRAP .......................................................................................................................37
5. FIRMWARE UPGRADE ..............................................................................................................39
5.1. FIRMWARE UPGRADE USING WEBEASY®.....................................................................39
5.2. FIRMWARE UPGRADE THROUGH VISTALINK PRO.......................................................41
Figures
Figure 1-1: 570ACO-X19-10G App A Block Diagram ...................................................................................... 2
Figure 1-2: 570ACO-X19-10G App B Block Diagram ...................................................................................... 2
Figure 3-1: 570ACO-X19-10G Front Plate ....................................................................................................... 5
Figure 3-2: 570ACO-X19-10G Back Plate ....................................................................................................... 6
Figure 4-1: WebEASY®- Login In Menu .......................................................................................................... 9
Figure 4-2: WebEASY®- Top Navigation Bar ................................................................................................ 10
Figure 4-3: WebEASY®- Side Menu .............................................................................................................. 10
Figure 4-4: WebEASY®- System/Control Port Configuration ........................................................................ 11
Figure 4-5: WebEASY®- System/Data Port Configuration ............................................................................ 11
Figure 4-6: WebEASY®- System/Data Port Configuration ............................................................................ 12
Figure 4-7: WebEASY® - System\SFP Monitor ............................................................................................. 13
Figure 4-8: WebEASY® - System/External Reference Monitor ...................................................................... 13
Figure 4-9: WebEASY® - System/Genlock Control......................................................................................... 14
Figure 4-10: WebEASY® - System/In-Band Control ....................................................................................... 14
Figure 4-11: WebEASY® - System/RPC Timeout........................................................................................... 14
Figure 4-12: WebEASY® - System/Time Management .................................................................................. 15
Figure 4-13: WebEASY® - System/Configuration Management..................................................................... 15
Figure 4-14: WebEASY® - System/Card Control ............................................................................................ 15
Figure 4-15: WebEASY® - License Control/Product Features........................................................................ 16
Figure 4-16: WebEASY®- ACS Status/ACS Control ..................................................................................... 17
Figure 4-17: WebEASY®- ACS Status/Input Control..................................................................................... 17
Figure 4-18: WebEASY®- ACS Status/Failover Control ................................................................................ 17
Figure 4-19: WebEASY®- ACS Status/Output Control .................................................................................. 18
Figure 4-20: WebEASY®- ACS Criteria/Video Monitoring Control ................................................................ 19
Figure 4-21: WebEASY®- ACS Criteria/Audio Monitoring Control ................................................................ 20
Figure 4-22: WebEASY®- ACS Criteria/Audio Monitoring Per Group ........................................................... 21
Figure 4-23: WebEASY®- ACS Criteria/Audio Monitoring Per Channel........................................................ 21
Figure 4-24: WebEASY®- ACS Criteria/ANC Monitoring Control.................................................................. 22
Figure 4-25: WebEASY®- SDI Control/SDI Output Control ........................................................................... 23
Figure 4-26: WebEASY®- SDI Control/SDI Output Monitoring...................................................................... 23
Figure 4-27: WebEASY®- SDI Control/VPID Monitoring ............................................................................... 24
Figure 4-28: WebEASY®- Video(S2110-20)IP Output/IP Output Control...................................................... 24
Figure 4-29: WebEASY®- Video(S2110-20)IP Output/IP Output Advanced Control .................................... 25
Figure 4-30: WebEASY®- Video(S2110-20)IP Output/IP Output Monitoring ................................................ 25
Figure 4-31: WebEASY®- Video(S2110-20)IP Input/Global Control ............................................................. 26
Figure 4-32: WebEASY®- Video(S2110-20)IP Input/IP Input Control ........................................................... 26
Figure 4-33: WebEASY®- Video(S2110-20)IP Input/IP Input Monitoring ...................................................... 27
Figure 4-34: WebEASY®- Audio(S2110-30)IP Output Tab ........................................................................... 28
Figure 4-35: WebEASY®- Audio(S2110-30)IP Input Tab .............................................................................. 29
Figure 4-36: WebEASY®- ANC(S2110-40)IP Output Tab ............................................................................. 30
Figure 4-37: WebEASY®- ANC(S2110-40)IP Input Tab................................................................................ 30
Figure 4-38: WebEASY®- PTP Control/PTP Control..................................................................................... 31
Figure 4-39: WebEASY®- PTP Control/PTP Monitor .................................................................................... 32
Figure 4-40: WebEASY®- Video Notify Tab .................................................................................................. 33
Figure 4-41: WebEASY®- Audio Notify/Audio Monitoring Control................................................................. 33
Figure 4-42: WebEASY®- Audio Notify/Audio Failover Notify ....................................................................... 34

570ACO-X19-10G Series
Quick Reference Guide
Page - vi Version 1.0
Figure 4-43: WebEASY®- Audio Notify/Audio Stream Notify ........................................................................ 34
Figure 4-44: WebEASY®- Audio Notify/Audio Channel Notify....................................................................... 35
Figure 4-45: WebEASY®- ANC Notify ........................................................................................................... 35
Figure 4-46: WebEASY®- Notify/ Board Notify.............................................................................................. 36
Figure 4-47: WebEASY®- Notify /Decapsulator Fault ................................................................................... 36
Figure 4-48: WebEASY®- Notify/ ACS Notify /ACS Fault.............................................................................. 36
Figure 4-49: WebEASY®- Notify/ ACS Notify/ Clear Faults........................................................................... 37
Figure 4-50: WebEASY®- SNMP Trap/SNMP Trap ...................................................................................... 37
Figure 5-1: WebEASY®- Upgrade Button on Top Menu Bar......................................................................... 39
Figure 5-2: WebEASY® - Firmware Upgrade Menu ...................................................................................... 39
Figure 5-3: WebEASY® - Firmware Upgrade Menu ...................................................................................... 40
Figure 5-4: VistaLINK Pro/Version Information .............................................................................................. 41
Figure 5-5: VistaLINK Pro/Upgrade Firmware ............................................................................................... 42
Figure 5-6: VistaLINK Pro/Upgrade Logon .................................................................................................... 42
Figure 5-7: VistaLINK Pro/ Upgrade completed............................................................................................. 42

570ACO-X19-10G Series
Quick Reference Guide
Version 1.0 Page - 1
1. OVERVIEW
The 570ACO-X19-10G is an auto clean switch designed for auto failover of SMPTE 2110 signals due to
Video faults, Audio Faults or Data faults with selectable priority for each input signal. The 570ACO-X19-
10G contains 3 independent cores with 4x SMPTE 2110 inputs (A,B,C,D) with the capability of producing
2X SMPTE 2110 and HDSDI outputs from each core (Program & Preview).
Monitoring capabilities include the ability to detect HDSDI errors. Parameters include frozen Video
detection, black video detection, picture and audio level monitoring as well as Ancillary Data monitoring.
Many of these parameters have user-adjustable thresholds and time periods to suit any application.
Features & Benefits
Signal Flow
•SMPTE 2022-7 on all 2110 main/backup inputs
•Settable frame delay up to 14 frames per video path (audio and ANC follow video)
•Support slipless mode to auto-sync videos from different inputs.
•Program and Preview outputs can be manually overridden by the customer to select any input.
•Clean video switch. No TRS violations on video output.
•Quiet audio switch. No pops.
Controls
•Full in-band control support for Magnum routing
•VGPI support from Magnum
•Priority setting for input failover
•Can force disable an input to exclude it
•Revertible and non-revertible failover
•A fault reported can be included or excluded in the failover decision making
•Can function 4x1, 3x2, 3x1 and 2x1 ACS by disabling unused inputs/outputs.
•Failover faults:
oFrozen video
oVideo missing
oAudio missing
oAudio silence
oClosed caption missing
oSCTE104 missing

570ACO-X19-10G Series
Quick Reference Guide
Page - 2 Version 1.0
Figure 1-1: 570ACO-X19-10G App A Block Diagram
Figure 1-2: 570ACO-X19-10G App B Block Diagram

570ACO-X19-10G Series
Quick Reference Guide
Version 1.0 Page - 3
2. SPECIFICATIONS
2.1. SERIAL DIGITAL VIDEO
•SMPTE 424M (3Gb/s)
•SMPTE 292M (1.5Gb/s)
2.2. IP INPUT
Ethernet Interface:8x 10GE SFP+(App A), 6x10GE SFP+(App B)
Decapsulation:SMPTE2110
2.3. SERIAL VIDEO OUTPUT
Standards:
App A: STMPE 424M (3Gb/s), STMPE 292M (1.5Gb/s)
App B: STMPE 292M (1.5Gb/s)
Number of Outputs: 6
Connector DIN
Signal Level: 800mV nominal
DC Offset: 0V ±0.5V
Return Loss: >12 dB up to 1. 5GHz
2.4. IP OUTPUT
Ethernet Interface:4x 10GE SFP+ (AppA & B)
Encapsulation:SMPTE2110
2.5. SWITCHING REFERENCE
Reference Input: 2x BNC on 570FR
Analog 525/625
PTP(IEEE1588–2008) via 10GbE interface
2.6. ELECTRICAL
Voltage: +12VDC
Power: 90 Watts
EMI/RFI: Complies with FCC regulations for class A devices
Complies with EU EMC directive

570ACO-X19-10G Series
Quick Reference Guide
Page - 4 Version 1.0
2.7. PHYSICAL
Number of slots: 2
2.8. ENCLOSURES
S570FR: 3RU chassis
570FR: 1RU chassis
2.9. ORDERING INFORMATION
570ACO-X19-10G Automatic change over with Audio / Video monitoring.10GE
I/O and SDI outputs. (SFP+ sold separately)

570ACO-X19-10G Series
Quick Reference Guide
Version 1.0 Page - 5
3. GETTING STARTED
The 570ACO-X19-10G comes with a companion rear plate and occupies one slot in 570FR. Refer to
Figure 3-1 for 570ACO-X19-10G front plate layout and Figure 3-2 for the 570ACO-X19-10G rear plate
layout.
3.1. FRONT PLATE
Figure 3-1: 570ACO-X19-10G Front Plate
The front of the 570ACO-X19-10G has following connections
•12xSFPs ports capable of passing 10Gb of data per port.
oFor App A:SFP1 to SFP8 are used:
Main Active Ports: SFP1, SFP3, SFP5, SFP7
Backup Active Ports: SFP2, SFP4, SFP6, SFP8
oFor App B: SFP1 to SFP8 are used:
Main Active Ports: SFP1, SFP3, SFP5
Backup Active Ports: SFP2, SFP4, SFP6
Note:Currently SFP9 to SFP12 are disabled and reserved for future use.

570ACO-X19-10G Series
Quick Reference Guide
Page - 6 Version 1.0
3.2. BACK PLATE
Figure 3-2: 570ACO-X19-10G Back Plate
The back of the 570ACO-X19-10G has following connections:
•20 mini din connectors, only first 6 dins are used for ACO1, ACO2, ACO3
oDin 1 for PGM SDI output and Din 2 for Prvw SDI output for ACO core 1
oDin 3 for PGM SDI output and Din 4 for Prvw SDI output for ACO core 2
oDin 5 for PGM SDI output and Din 6 for Prvw SDI output for ACO core 3
•2 BNCs for Reference
•1 power supply

570ACO-X19-10G Series
Quick Reference Guide
Version 1.0 Page - 7
3.3. CARE AND HANDLING OF OPTICAL FIBER
The transmission characteristics of the fiber are dependent on the shape of the optical core and therefore
care must be taken to prevent fiber damage due to heavy objects or abrupt fiber bending. Evertz
recommends that the user maintains a minimum bending radius of 5 cm to avoid fiber bending loss that
will decrease the maximum attainable distance of the fiber cable.

NOTE: Never touch the end face of an optical fiber. Always keep dust caps on optical fiber
connectors when not connected and always remember to properly clean the optical end
face of a connector before making a connection.
3.4. HARDWARE INSTALLATION
To successfully install the 570ACO-X19-10G, the following is required:
1. 570 Series Frame
2. 570 Frame Controller
3. Web browser using the 570FC frame controller with 570ACO-X19-10G installed in frame
Before handling the card, it is important to minimize the potential effects of static electricity. It is therefore
recommended that an ESD strap be worn.
Locate on the chassis 2 adjacent vacant slots. Unpack the 570ACO-X19-10G and separate the rear panel
from the main card. Locate on the rear of the rack the two slots and remove the blanking panels. Insert
the rear panel into the back of the chassis and secure using the four screws provided.
Now insert the 570ACO-X19-10G card into the corresponding front slots ensuring the card lines up with
the slot runners on the bottom and the top of the chassis. Push the card firmly into the slot ensuring that
when it mates with the rear card it has been firmly pushed into a seated position. The card is secured to
the frame with two thumb screws on the front. Hand tighten the thumb screws instead of using a screw
driver to avoid over tightening.
This procedure can be completed on all the other modules. The cards are hot swappable allowing for the
frame to be powered on while installing.

570ACO-X19-10G Series
Quick Reference Guide
Page - 8 Version 1.0
3.5. 570ACO-X19-10G INPUT/OUTPUT MAPPING
3.5.1. App A Input/output mapping
In total, 12 virtual SDIs (1A/1B/1C/1D, 2A/2B/2C/2D, 3A/3B/3C/3D) are converted from 2110 inputs.
Each ACS does failover switching of input (A/B/C/D) and output 2 SDIs (PGM and PRV) and identical
2110 outputs.
SFP Input
Virtual SDI Input
SFP1&2
1A, 2A, 3A
SFP 3&4
1B, 2B, 3B
SFP 5&6
1C, 2C, 3C
SFP 7&8
1D, 2D, 3D
Table 3-1: 570ACO-X19-10G App A SMTPE 2110 Input Mapping
SFP Input
Virtual SDI Input
SFP1&2
1PGM, 2PGM, 3PGM
SFP 3&4
1PRV, 2PRV, 3PRV
Table 3-2: 570ACO-X19-10G App A SMTPE 2110 Output Mapping
3.5.2. App B Input/output mapping
In total, there are 9 virtual SDIs (1A/1B/1C, 2A/2B/2C, 3A/3B/3C) are converted from 2110 inputs. Each
ACS does failover switching of input (A/B/C) and output 2 SDIs (PGM and PRV) and identical 2110
outputs.
SFP Input
Virtual SDI Input
SFP1&2
1A, 1B, 1C
SFP 3&4
2A, 2B, 2C
SFP 5&6
3A, 3B, 3C
Table 3-3: 570ACO-X19-10G App B SMTPE 2110 Input Mapping
SFP Input
Virtual SDI Input
SFP1&2
1PGM, 2PGM, 3PGM
SFP 3&4
1PRV, 2PRV, 3PRV
Table 3-4: 570ACO-X19-10G App B SMTPE 2110 Output Mapping

570ACO-X19-10G Series
Quick Reference Guide
Version 1.0 Page - 9
4. WEB INTERFACE
Different product licenses will enable different product features. Depending on the product features
enabled, there will be different tabs and controls that will need to be configured. For the purpose of this
Quick Reference Guide, we have enabled all product features.
After the card has been installed and configured with the required network addresses for the control ports,
it can be completely configured using the web interface. To do this, simply type in the IP address of the
Control Port on the 570ACO-X19-10G module in the web browser.

Note: We are assuming that the S570FR or 570FR frame is connected to the network
and the computer is able to communicate to the frame on the Control Port IP address of
the 570ACO-X19-10G
Figure 4-1: WebEASY®- Login In Menu
For login and password, type in “customer”.
Upon entering the correct credentials, the user will be directed to the main User Interface that displays
display the following information:

570ACO-X19-10G Series
Quick Reference Guide
Page - 10 Version 1.0
Figure 4-2: WebEASY®- Top Navigation Bar
•Top Navigation Bar
oProduct Name:Displays the product Name
oRefresh:Manually refreshes the user’s configuration
oAuto Refresh:Automatically refreshes the user’s configuration
oApply:Manually saves the user’s configuration
oDynamic Apply: Automatically saves the user’s configuration
oUpgrade:Upgrade the Firmware’s version of the product
oLogout: Logs the user out of the User Interface
Figure 4-3: WebEASY®- Side Menu
•Side Menu: Displays a menu of all tabs the user is able to monitor/configure.
•Main Tab: Middle section of the interface, displays all the fields for the item selected from the
side menu. These menu tabs and fields will be fully described in the following sections.

Due to the size of the certain menu tabs, screen tab images will be broken into multiple
images. Some of the screen shots will also require the user to zoom in to see the image
more clearly.