fantastic furniture Lean Bookcase A Frame 4 Shelf User manual

Version 1.0
Lean
Bookcase A Frame 4 Shelf
www.fantasticfurniture.com.au

fantasticfurniture.com.au PAGE 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home for your
chance to win a $250 Fantastic Furniture Gift Card!
fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Recommended weight capacity : 15kgs/shelf.

PAGE 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re -tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

20 x Screws
(H1)
4 x Flat Pads
(H5)
4 x Stickers
(H6)
Parts list
Side Panel (P1) x 2;
Shelf Panel (P2);
Shelf Panel (P3);
Shelf Panel (P4);
Shelf Panel (P5)
Hardware pack
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Shelf Panel
(P2)
Side Panel
(P1)
Side Panel
(P1)
Shelf Panel
(P3)
Shelf Panel
(P4)
Shelf Panel
(P5)
www.fantasticfurniture.com.au PAGE 4
DO NOT USE
1 x Safety
Strap
(H2)
2 x Washers
(H4)
1 x Safety
Strap Screw
(H3)

You will need
Step 1
Secure Side Panels (P1x2) together with 4 x Screws (H1) by tightening with the Phillips
Head Screwdriver. Place 4 x Stickers (H6) at the top of the Side Panels (P1x2) to cover
the screw holes. Place 4 x Flat Pads (H5) on the bottom of Side Panels as shown.
Attach all Shelf Panels (P2, P3, P4 & P5) to Side Panels (P1x2) with 16 x Screws (H1) by
tightening with the Phillips Head Screwdriver.
Phillips head
screwdriver
(P1)
(P1)
4 x Screws
(H1)
Phillips head
screwdriver
Step 2 (P1)
(P1)
16 x Screws
(H1) (P3)
(P4)
(P5)
(P2)
4 x Stickers
(H6)
www.fantasticfurniture.com.au PAGE 5
H1
H6
H6
H1
H1
H1
H1
H1
H1
H1
H1
H1
H1
You will need
H5
H5
H5
H5
4 x Flat Pads
(H5)

Step 3
Secure the Safety Strap (H2) to the underside of the Shelf Panel (P2) as shown use 1 x Washer
(H4) and secure by tightening 1 x Safety Strap Screw (H3) with the phillips head screwdriver.
You will need
www.fantasticfurniture.com.au PAGE 6
(P2)
Move the unit into it’s final position and then
secure the Safety Strap to the wall. Ensure it
is firmly attached. Please use appropriate
fixtures for your wall. * Seek advice from a
qualified tradesperson on how to attachthis
safety strap to your specific wall.
Step 4
Phillips head
screwdriver
1 x Washer
(H4)
Screw and wall Plug
are not provided.
Please use appropriate
fixtures for your wall.
You will need
Job Complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
Wall
Screw
H4
1 x Safety
Strap (H2)
1 x Safety Strap
Screw (H3)
1 x Washer
(H4)
Phillips head
screwdriver
(P1)
(P1)
H3
H4
H2