fantastic furniture STAR WARS BEDSIDE TIE FIGHTER User manual

Version 1.0
www.fantasticfurniture.com.au
TIE FIGHTER
STAR WARS BEDSIDE
TWO PEOPLE
REQUIRED

ENJOY
Your purchase from
Australia's Best Value Furniture Store
www.fantasticfurniture.com.au PAGE 2
WARNING: Weight Placed Inside Drawer Not To
Exceed 5Kg.
!

Assembly checklist
Useful Information
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
! The most commom mistakes made during assembly are using the wrong hardware or getting
components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasterners. Check the product care label or website for
product care instructions.
! If you are having any difficulties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
Read through the instructions carefully
before you begin. Make sure you have all the required tools.
Never use power tools unless instructed.
Identify and lay out all of the components
before you begin assembly. Unless instructed, do not fully tighten screws
until the item is fully assembled.
www.fantasticfurniture.com.au PAGE 3

www.fantasticfurniture.com.au PAGE 4
What you need
to assemble the product
Other tools you need
Philips head screwdriver, soft head mallet.
Parts list
Box 1: Side Panel L (P1); Side Panel R (P2);
Top Panel (P3); Back Panel (P4);
Drawer Back Panel (P5); Drawer Side Panel L (P6);
Drawer Side Panel R (P7); Drawer Bottom Panel
(P8); Drawer Front Panel (P9); All Hardware.
12 x SHORT SCREW
M3x12mm
(H5)
4 x LONG SCREW
M4x38mm
(H4)
10 x WOOD DOWEL
M6x25mm
(H3)
8 x CAM NUT
15mm
(H1)
8 x CAM BOLT
(H2)
1 x DRAWER
RUNNER L 14"
(H6)
4 x PVC NAIL 5/8"
(H8)
0 10 20 30 40 50 60 70 80 90 100
mm
Hardware list
1 x RUNNER
TRACK R 14"
(H7)
Side Panel L
(P1)
Side Panel R
(P2)
Top Panel
(P3)
Back Panel
(P4)
Drawer
Back Panel
(P5)
Drawer
Side Panel L
(P6)
Drawer
Side Panel R
(P7)
Drawer
Bottom Panel
(P8)
Drawer
Front Panel *
(P9)
* Drawer Front Panel (P9) has a "STAR WARS"
sticker on the reverse side.
1 x DRAWER
RUNNER R 14"
(H6)
1 x RUNNER
TRACK L 14"
(H7)

www.fantasticfurniture.com.au PAGE 5
Step 1
Step 2
You will need
You will need
Soft Head Mallet
H2
- Screw 6 x cam bolts (H2) into panels (P1) & (P2) using a philips head screwdriver.
- Fix 4 x PVC nails (H8) into panels (P1) & (P2) using a soft head mallet.
H2
H2
H2
H2
H2
H2
H8
H8
H8
H8
H8
6 x Cam Bolt
(H2) 4 x PVC Nail (H8)
P1
H7-L
3 x Screw
M3x12mm (H5) 1 x Runner Track L 14"(H7)
Philips Head
Screwdriver
H5
H7-L
- Attach runner track (H7-L) to panel (P1) with 3 x short screws (H5) using a philips
head screwdriver. Ensure the screw head is flush with the runner and not protruding
at all.
** Please measure the screw size first before using it. Ruler is provided on page 4.

You will need
8 x Wood Dowel
M6x25mm (H3)
6 x Cam Nut
15mm(H1)
H3
Mallet
- Insert 6 x cam nuts (H1) into top panel (P3) & back panel (P4).
- Rotate the cam nuts, so the arrow points towards the incoming cam bolt.
- Insert 8 x dowels (H3) into panels (P3) & (P4) by hand or using a soft head mallet.
H1
H3
H3
H3
H3
H3
H3
H3
H3
P3
P4
H1
H1
H1
H1
H1
H1
www.fantasticfurniture.com.au PAGE 6
Step 3
Step 4
You will need
P2
H7-R
3 x Screw
M3x12mm (H5) 1 x Runner
Track L/R 14"(H7)
Philips Head
Screwdriver H7-R
H5
- Attach runner track (H7-R) to panel (P2) with 3 x short screws (H5) using a philips head
screwdriver. Ensure the screw head is flush with the runner and not protruding at all.
** Please measure the screw size first before using it. Ruler is provided on page 4.

www.fantasticfurniture.com.au PAGE 7
Step 5
Step 6
You will need
H2
2 x Cam Bolt
(H2) Philips Head
Screwdriver
- Screw 2 x cam bolts (H2) into panel (P9) using a philips head screwdriver.
H2
H2
P9
You will need
2 x Wood Dowel
M6x25mm (H3)
2 x Cam Nut
15mm(H1)
Soft Head Mallet
- Insert 2 x cam nuts (H1) into panels (P6) & (P7).
- Rotate the cam nuts, so the arrow points towards the incoming cam bolt.
- Insert 2 x dowels (H3) into panels (P6) & (P7) by hand or by using a soft head mallet.
H1
H3
H3 H1
H1
P6
P7

www.fantasticfurniture.com.au PAGE 8
Step 7
Step 8
You will need
4 x Screw
M4x38mm (H4) Philips Head
Screwdriver
H4
H4
P7
P6
P5
H4
H4
- Attach panels (P6) & (P7) to panel (P5).
- Insert 4 x long screws (H4) and tighten with a philips head screwdriver.
** Please measure the screw size first before using it. Ruler is provided on page 4.
P5
P6
P7 P8
P9
You will need
Philips Head
Screwdriver
White side facing up
- Slide panel (P8) into the groove of panels (P6) & (P7) and the drawer back panel (P5).
- Ensure the bottom panel (P8) slides fully into the groove of panel (P5).
- Attach panel (P9) to the drawer sides.
- Ensuring the bottom panel (P8) slides into the groove on panel (P9).
- Turn the cam nuts on panels (P6) & (P7) clockwise with a philips head screwdriver to
lock in position.
Printed Side of Panel
Warning Sticker

Step 10
www.fantasticfurniture.com.au PAGE 9
Step 9
P8
H6-L
H6-R
H6-R
H5
You will need
6 x CSK Screw
M3x12mm
(H5)
1 x Drawer
Runner L/R 14"
(H6)
Philips Head
Screwdriver
- Attach drawer runner (H6) to the underside of the drawer side panels (P6) and (P7)
with 6 x short screws (H5) using a philips head screwdriver.
** Please measure the screw size first before using it. Ruler is provided on page 4.
P1
P2
P3 P4
You will need
Philips Head
Screwdriver
- Attach panels (P3) & (P4) to panels (P1) & (P2).
- Turn the cam nut on panels (P3) & (P4) clockwise with a philips head
screwdriver to lock in position.
Arrow Sticker points this way
White Edge facing this way

www.fantasticfurniture.com.au PAGE 10
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
Step 11
- Insert the drawer as shown, sliding the wheels on each side of the drawer over the
wheels on the side panels.
If necessary, tilt the front of the drawer upwards to set the runners in position.
P2
P1
P9