fantastic furniture Buzz Student Desk User manual

Version 1.1
fantasticfurniture.com.au
Buzz
Student Desk

fantasticfurniture.com.au Page 2Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au
Recommended weight capacity: 30kg maximum.

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be
used as they may not fit through a door once assembled.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Flat blade screwdriver
Soft headed mallet
Hardware pack
Parts list
Side Panel Left (P1);
Side Panel Right (P2);
Top Panel (P3);
Back Panel (P4);
Back Support (P5);
Shelf Panel (P6);
4 x Cam Bolts
(H3)
11 x Large
Screws
(H2)
15 x Dowels
(H1)
4 x Cam Nuts
(H4)
4 x Leg Studs
(H5)
Page 4fantasticfurniture.com.au
Back Panel
(P4)
Top Panel
(P3)
Shelf Panel
(P6)
Back Support
(P5)
Side Panel R
(P2)
Side Panel L
(P1)

Page 5
You will need
Step 1
You will need
Soft Headed
Mallet
Step 2
Insert 15 x Wood Dowels (H1) into panels (P1, P2, P4, P5 & P6) by gently pushing them in or
tapping with a soft headed mallet.
(P1) (P2) (P4)
(P4)
(P5) (P6)
(P6)
(H1)
(H2)
DETAIL A
DETAIL A
Fix the Back Panel (P4) to the Shelf Panel (P6) and tighten with the Screw (H2)
using a phillips head screwdriver.
15 x Wood
Dowels (H1)
Phillips Head
Screwdriver
1 x Screw
(H2)
fantasticfurniture.com.au
White Edging

Page 6
You will need
Step 3
You will need
Step 4
Using a phillips head screwdriver, screw 4 x Cam Bolts (H3) into the Top Panel (P3) until tight.
(P1)
(P3)
(P6)
(P5)
(H3)
(H2)
DETAIL A
DETAIL A
Align the dowels on Shelf Panel (P6), Back Panel (P4) and Back Support (P5)
to holes on Side Panel L (P1) and slot in. Fix the panels with 5 x Screws (H2)
and tighten with a phillips head screwdriver.
4 x Cam Bolts
(H3)
Phillips Head
Screwdriver
5 x Screws
(H2)
fantasticfurniture.com.au
White Edging
(P4)

Page 7
Step 5
You will need
Step 6
Fix the Side Panel R (P2) to unit by aligning dowels to matching holes and slot in.
Fasten using 5 x Screws (H2) using a phillips head screwdriver. Gently tap 4 x Leg Studs (H5)
to the underside of the Side Panels (P1 & P2) with a soft headed mallet as shown.
(P1)
(P3)
(P1)
(P6)
(P5) (H4)
(H4)
(P2)
(P6)
(P2)
(H2)
(P5)
TOP
DETAIL A
DETAIL A
DETAIL A
Insert 4 x Cam Nuts (H4) into holes of Side Panels (P1 & P2). Rotate the Cam Nuts
(H4) so the arrows point towards the incoming Cam Bolts (H3). Align the Cam
Bolts (H3) and holes on the Top Panel (P3) to the holes and dowels on panels
(P1 & P2) and slot the panel on top. Tighten the Cam Nuts (H4) with a flat blade
screwdriver, rotating clockwise to lock into position.
Gently push Top Panel
(P3) downwards and turn
Cam Nut (H4) until tight.
Repeat with all Cam Nuts.
Push Cam Nut (H4)
into hole with arrow
pointing towards
Cam Bolt (H3)
Turn to lock
Flat Blade
Screwdriver
4 x Cam Nuts
(H4)
fantasticfurniture.com.au
4 x Leg Studs
(H5)
Phillips Head
Screwdriver
5 x Screws
(H2)
This is how a Cam Nut works...
The head of the bolt goes into the wide mouth of the nut.
You then turn the nut so it tightens over the bolt.
You will need
Soft Headed
Mallet
(H5)
DETAIL A

Page 8
Step 7
fantasticfurniture.com.au
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.

Chair
fantasticfurniture.com.au
Mini Me

fantasticfurniture.com.au
Page 2