fantastic furniture Reed Utility Broom 2 Door User manual

fantasticfurniture.com.au
0.1noisreV
Utility Broom 2 Door
Reed

Secure it!
Wall attachment guide
For plasterboard
(with available wood stud)
Securing method:
Screw inserted directly into
stud.
Reduce the risk of furniture
tip-over accidents
Page 2
For plasterboard
(without available wood stud)
Securing method:
Self drilling plasterboard
anchor.
For masonry wall
Securing method:
Solid wall: Plug with screw
Hollow wall: Spring toggle
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.
10
WEIGHT LIMIT: KGS PER SHELF
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY OR DEATH.
To avoid any serious or fatal injury, a wall strap has been provided with this
product to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are not
included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
To reduce the risk of furniture tipover:
•Do not allow children to stand, climb or hang on furniture. It may topple
and cause serious injury or death.
•Do not place toys or other child appealing items on top of this furniture,
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
•Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
•Avoid putting a TV on this product.

Page 3
fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!

Page 4
fantasticfurniture.com.au
Read through the instructions
carefully before you begin.
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screwsuntil the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a so t surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
components please visit our website Help Centre for further assistance.
Assembly Checklist
!Please see page 2 for any safety requirements or weight restrictions.
Useful information

Page 5
fantasticfurniture.com.au
20X Screw
What You Need
to assemble the product
Other tools you need
Parts list
Box 1:
Door Panel (P11) x 2.
Ø35 mm(45°)
Ø8 x M4 x 18 mm
(H1) (H2) (H3) (H4) (H5) (H7)
(H10)
(H9)(H8)
18X 24X 6x 24X 4X 2X
4X 40X
(H6)
Hardware list
Side Panel(L)
(P1)
Side Panel(R)
(P2)
(P3)
Top Panel
(P10)
(P9)
Back Panel
(P7)
Adjustable
Box 1 :
Box 2:
Side Panel (L) (P1)
Base Panel(P8).
Door Panel
(P11)
Back Panel
Door Panel
(P6)
Fixed Panel
(P4)
Bottom Panel
(P8)
Base Panel
(P6)
Fixed Panel
Panel
(P5)
Middle Partition Panel
(P11)
Middle Partition Panel(P5)
Phillips head screwdriver; Hammer.
Plastic Cap Plastic Dowel Hinges Screw Shelf Support Metal Handle
Screw Nail (H12)
(H11)
1X Wall Strap 1X 6X Leg Stud
(H13)
Screw 2X Washer
(H14)
6X Screw
Adjustable Panel(P7)
Top Panel (P3)
Side Panel (R) (P2)
Back Panel(P9,P10)
Bottom Panel (P4)
2 x Fixed Panel (P6)

Page 6
fantasticfurniture.com.au
Fix Plastic Dowels (H3) to Panels (P3, P4, P5, P6x2 and P8) one by one.
Step 1
You will need
Phillipshead
screwdriver
(H4)
6X (H5)
12X
(H7)
2X (H8)
4X
Step 2
You will need
(H3)
24X
5 x2
(H8)
(H7)
(H4)
(H5)
(P11) x2
D
x2
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(H3)
(P4)
(P3)
(P8)
(P5)
(P6)
(H3)
(H3)
Hinges Screw
Metal Handle Screw
Plastic Dowel
Fix Hinges (H4) to Door Panel (P11) by tightening with Screws (H5).
Line Handle (H7) to pre drilled holes and tighten with Screws (H8).
Repeat for Second Door Panel (P11).

Page 7
fantasticfurniture.com.au
Step 3
You will need
Phillipshead
screwdriver
8X
(H1)
(H1)
Step 4
You will need
Phillips
head
screwdriver
12X(H1)
(P3)
(P5)
(P6)
(P4)
(P6)
(P3)
(P4)
(P6)
(P6)
(P2)
(P1)
(P8)
(H1)
Screw
Screw
Fix Top and Bottom Panels (P3+P4) to Middle Partition Panel (P5) by tightening with Screws (H1).
Fix Side Panel (P1) to Panels (P3, P4, P6×2) and Base Panel (P8) by tightening with Screws (H1).
Fix Side Panel (P2) to Panels (P3+P4) and Base Panel (P8) by tightening with Screws (H1).
Fix Shelf Panels (P6x2) to Middle Panel (P5) by tightening with Screws (H1).
Ensure the raw edges of the
shelves are facing towards
the back of the unit
Ensure the raw edges of the
shelves are facing towards
the back of the unit

Page 8
fantasticfurniture.com.au
Step 5
Step 6
You will need
6X(H13)
Ø35 mm(45°)
Leg Stud
K
(H13) (H13)
(H13)
Hammer
(P2)
(P1)
(P8)
WARNING:ENSURE THE WALL STRAP IS
ATTACHEDTOAVOID SERIOUS INJURY.
Toavoidany serious or fatal injury, this product has been
fittedwith a wall strap to prevent toppling. We strongly
recommendthat this product is permanently fixed to the
wallor other suitable surface. Fixing devices are not
includedsince different surface materials require
differentattachments. Please seek professional advice
ifyou are in doubt of what fixing device to use.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentre Pty Ltd
71Seville Street
FAIRFIELDEAST
NSW2165
AUSTRALIA
PO#:ABC123
WARNING:ENSURE THE WALL STRAP IS
ATTACHEDTOAVOID SERIOUS INJURY.
Toavoidany serious or fatal injury, this product has been
fittedwith a wall strap to prevent toppling. We strongly
recommendthat this product is permanently fixed to the
wallor other suitable surface. Fixing devices are not
includedsince different surface materials require
differentattachments. Please seek professional advice
ifyou are in doubt of what fixing device to use.
COUNTRYOFORIGIN
CHINA
IMPORTEDBY
FHLDistributionCentre Pty Ltd
71Seville Street
FAIRFIELDEAST
NSW2165
AUSTRALIA
PO#:ABC123
outwards
Ensure the raw edge
of back panels is facing
5
5
(H9)
(P10)
Top
Screw(H10)
Pre-drilled guide
holes for
Fix Back Panel (P9,P10) to assembled unit using Nails (H9).
Fix Back Panel (P9) to Fixed Shelves (P6×2) using Screws (H10).
*Ensure the predrilled screw holes line up with the Fixed Shelf Panels (P6×2) before fixing back panel.
Fix Leg Studs (H13) to the Bottom of Panels (P1, P2 and P8).
You will need
Phillipshead
screwdriver
(H10)
(H9)
40X 6X
Nail Screw
sHammer
(P9)

Page 9
fantasticfurniture.com.au
Step 7
Step 8
You will need
You will need
D
Ø35 mm(45°)
4X (H6)
(P7) (H6)
(P1)
(P5)
Shelf Support
Place Shelf Supports(H6) into side Panels (P1,P5) at preferred height.
Place Adjustable Panel (P7) into secured shelf supports.
(P1)
(P2)
(P11)
(P11)
(H5)
(H5)
Phillipshead
screwdriver
(H5)
12X Screw
Fix Door Panels (P11×2) to Side Panels
(P1, P2) using Screws (H5).

fantasticfurniture.com.au
Step 10
Step 9
(H2)
You will need
(H2)
18X
Use Plastic Caps (H2) to cover all screws.
Plastic Cap
Adjusting possibilities
mounting screw
Lateral adjustment
by screw adjustment slackening the
Front-to-back by
hinge-arm
Vertical adjustment via
mounting plate(via slots or,
if in two pieces ,by screws)
Page 10