fantastic furniture Emmett User manual

Version 1.0
Emmett
Storage Trolley 3 Shelf
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au
RECOMMENDED WEIGHT CAPACITY PER SHELF: 10KG

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

What you need
to assemble the product
Page 4fantasticfurniture.com.au
Hardware pack

Page 5
Step 1
fantasticfurniture.com.au
Attach Bottom Frames (P2 & P3) with 1 x Bolt (H1) by tightening with the Allen Key (H3).
Repeat for second set of Bottom Frames (P2 & P3).

Page 6
Step 2
fantasticfurniture.com.au
Screw 2 x Nuts (H2) onto 2 x Casters (H6), as shown.
Attach 2 x Casters (H6) to Bottom Frames (P2 & P3) by screwing in until fully tightened.
Repeat steps for remaining Nuts 2 x (H2) and Brake Casters 2 x (H5).
Fully tighten Nuts 4 x (H2) with wrench (H4) if needed.

Page 7
Step 3
fantasticfurniture.com.au
Insert Middle Frames (P4x4) into Bottom Frames (P2x2) and (P3x2) and attach
with 4 x Bolts (H1). Tighten with Allen Key (H3).

Page 8
Step 4
fantasticfurniture.com.au
Insert Top Frames (P5x2) into Middle Frames (P4x4) as shown.

Page 9
Step 5
fantasticfurniture.com.au
Attach Shelves (P1x3) to Middle and Top Frames (P4x4), (P5x2) with 12 x Bolts (H1)
by tightening with Allen Key (H3) as shown.

Page 10
Step 6
fantasticfurniture.com.au
If the Storage Trolley is uneven on the floor, adjust the 4x Nuts (H2) on the
2 x Brake Casters (H5) and 2 x Casters (H6) with 2 x Wrenchs (H4), as shown.