fantastic furniture STAFFORD User manual

STAFFORD
Office Chair Black
Approved SM 03.02.2022

Head Rest (P1) x 1
Back Rest (P2) x 1
Left Arm (P3) x 1
Right Arm (P4) x 1
Seat (P5) x 1
Seat Plate (P6) x 1
Gas Lift Cover (P7) x 1
Gas Lift (P8) x 1
Star Base (P9) x 1
Castors (P10) x 5
Head Rest (P1)
Back Rest (P2)
Left Arm (P3)
Right Arm (P4) Seat (P5)
Seat Plate (P6)
Gas Lift Cover (P7)
Gas Lift (P8)
Castor (P10)
Star Base (P9)
2x 32mm Bolts
(H1)
4x 35mm Bolts
(H2)
2x 25mm Bolts
(H3)
2x 22mm Bolts
(H4)
4x 30mm Bolts
(H5)
2x 16mm Bolts
(H6)
6x Washers
(H7)
Allen Key
(H8)

Insert Castors (P10x5) into the Star Base (P9) as shown, pushing down firmly on each castor
to ensure they are fixed in position. Insert the Gas Lift (P8) into the top of the Star Base (P9).
Place the Gas Lift Cover (P7) over the top of the Gas Lift (P8) as shown.
Align the holes on the Arms (P3 & P4) with the bottom of the Seat (P5) and
use the Allen Key (H8) to fasten 2x 32mm Bolts (H1), 4x 35mm Bolts (H2) and
6x Washers (H7) to the seat as shown.
Ensure the the Arms (P3 & P4) are facing the correct direction before
securing to the base of the Seat (P5).
(P7)
(P8)
(P9)
(P10)
(P10)
(P10)
(P10)
(P10)
(P3)
(P4) (P5)
(H1)(H2)
(H7)
(H7)
(H1)
(H7)
(H2)
(H7)
(H8)
2x 32mm
Bolts (H1)
4x 35mm
Bolts (H2)
6x Washers
(H7)
Allen Key
(H8)

Align the holes on the Seat Plate (P6) with the bottom of the Seat (P5) and use the Allen Key (H8) to
fasten 2x 25mm Bolts (H3) and 2x 22mm Bolts (H4) to the Seat (P5).
Ensure the front of the Seat Plate (P6) is in the correct direction before securing to the base of the
Seat (P5).
Attach the Back Rest (P2) to the bottom of the Seat (P5) using 4x 30mm Bolts (H5),
tightening with the Allen Key (H8) as shown. Ensure the Bolts (H5) are tightened securely.
(H8)
(P5)
(P6)
2x 25mm
Bolts (H3)
2x 22mm
Bolts (H4)
Allen Key
(H8)
(H3) (H4)
4x 30mm
Bolts (H5)
Allen Key
(H8)
(H5)
(H8)
(P2)
(P5)
(P6)

Position the centre hole of the Seat Plate (P6) over the top of the Gas Lift (P8). Carefully lower the Seat (P5)
onto the Gas Lift (P8). Press the seat down firmly.
Check the connection is secure by sitting in the chair.
To attach the Head Rest (P1) to the Back Rest (P2), use the Allen Key (H8) to fasten
2x 16mm Bolts (H6) as shown.
Ensure the Bolts are tightly secured.
2x 16mm
Bolts (H6)
Allen Key
(H8)
(P5)
(P6)
(P8)
(P1)
(P2)
(H6)
(H8)
(P1)
(P2)