fantastic furniture Havana Slim Boy User manual

Version 1.0
Havana
Slim Boy
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY.
To avoid any serious or fatal injury, this product has been supplied
with a wall strap to prevent toppling. We strongly recommend that
this product is permanently fixed to the wall or other suitable sur-
face. Connecting attachments for your wall are not included since
dierent surface materials require dierent attachments. Please seek
professional advice if you are in doubt of what wall connections to
use.
Recommended weight capacity : 10kgs/drawer.
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

Parts list
Top Panel (P1);
Left Side Panel (P2);
Right Side Panel (P3);
Leg (P4);Leg (P5);Leg (P6);
Leg (P7);
3 x Back Panels(P8);
2 x Rails (P9);
Rail (P10);Rail (P11);Rail (P12);
2 x Drawer Fronts (P13);
2 x Left Drawer Side (P14);
2 x Right Drawer Side (P15);
2 x Drawer Back (P16);
5 x Drawer Base (P17);
4 x Drawer Front (P18);
Felt Drawer Base (P19);
4 x Left Drawer Side (P20);
4 x Right Drawer Side (P21);
4 x Drawer Back (P22)
Hardware pack
Left Drawer
Side (P20)
Left Drawer
Side (P14x2)
Right Drawer
Side (P21)
Right Drawer
Side (P15x2) Drawer Back
(P22)
Drawer Back
(P16x2) Drawer
Base
(P17)
Drawer
Base
(P17)
Felt Drawer
Base
(P19)
Drawer Front
(P13x2)
Drawer Front
(P18)
Top Panel
(P1)
Back
Panel
(P8)
Back
Panel
(P8)
Back
Panel
(P8)
Left
Side
Panel
(P2)
Leg
(P4)
Leg
(P5)
Leg
(P6)
Leg
(P7)
Rail
(P9)
Rail
(P9)
Rail
(P10)
Rail
(P11)
Rail
(P12)
What you need
to assemble the product
Other tools you need:
Phillips head screwdriver;
Hammer
Page 4
fantasticfurniture.com.au
DO NOT USE
x4
32 x Cam
Bolts
(H3)
32 x Cam
Nuts
(H4)
60 x Small
Screws
(H5)
24 x Small
Cam Nuts
(H11)
24 x Small
Cam Bolts
(H10)
6 x CL Runner
Tracks
(H6)
4 x Plastic
Glides
(H1)
12 x Handle
Bolts
(H14)
6 x CR Runner
Tracks
(H7)
6 x Handles
(H13)
6 x DR
Runners
(H9)
6 x DL
Runners
(H8)
8 x Wedges
(H15)
8 x Screws
(H16)
1 x Safety
Strap
(H17)
2 x Washers
(H19)
30 x Dowels
(H2)
24 x Long
Screws (L25mm)
(H12)
1 x Screw
(L25mm)
(H18)

16 x Cam Nuts
(H4)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
You will need
Step 1
Phillips Head
Screwdriver
Step 2
You will need
Phillips Head
Screwdriver
16 x Cam Bolts
(H3)
Secure 16 x Cam Bolts (H3) to Legs(P4, P5, P6, P7) by
tightening with the Phillips Head Screwdriver. Hammer 4 x Plastic Glides (H1) on
Legs (P4, P5, P6, P7) as shown.
12 x Dowels
(H2)
fantasticfurniture.com.au Page 5
(P7)
(P6)
(P5)
(P4)
H3
H3
H3
H3
(P7)
(P6)
(P3)
H4
H2
H2
H4
(P4)
(P5)
(P2)
H4
H2
H2
H4
Insert 12 x Dowels (H2) into the
holes of Side Panels (P2, P3). Insert 16
x Cam Nuts (H4) into the holes of Side
Panels (P2, P3). Rotate the cam nuts so
the arrows point towards the incoming cam bolts.
Attach Legs (P4, P5) to Left Side Panel (P2) and
Legs (P6, P7) to Right Side Panel (P3).
Tightening Cam Nuts with the Phillips Head Screwdriver.
H1
H1
H1
H1
4 x Plastic
Glides (H1)
Hammer

You will need
Step 3
Phillips Head
Screwdriver
Step 4
You will need
Phillips Head
Screwdriver
CL
CR
18 x Small
Screws (H5)
6 x CR Runner
Track (H7)
fantasticfurniture.com.au Page 6
Attach 6 x CL Runner Tracks (H6) to Left Side Panel (P2) with 18 x Small Screws (H5).
Secure 5 x Cam Bolts (H3) to Left Side Panel (P2) by tightening with the Phillips Head
Screwdriver.
6 x CL Runner
Track (H6)
18 x Small
Screws (H5)
5 x Cam Bolts
(H3)
5 x Cam Bolts
(H3)
H5
H5
H5
H5
H5
H5
H5
H6
H3
H3
H3
H3
H3
H6
H6
H6
H6
H6
H6
(P2)
H5
H5
H5
H5 H3
H3
H3
H3
H3
H5
H5
H5
H7
H7
H7
H7
H7
H7
H7
(P3)
Attach 6 x CR Runner Tracks (H7) to Right Side Panel (P3) with 18 x Small Screws (H5).
Secure 5 x Cam Bolts (H3) to Right Side Panel (P3) by tightening with the Phillips Head
Screwdriver.

Step 5
Step 6
Slide 2 x Back Panels (P8) into the grooves of Rails (P9x2&P12).
Ensure laminated
side of panel is
facing inwards.
fantasticfurniture.com.au Page 7
You will need
Phillips Head
Screwdriver
5 x Cam Nuts
(H4)
5 x Dowels
(H2)
(P2)
(P9)
(P9)
(P11)
(P10)
(P12)
H4
H2
Insert 5 x Dowels (H2) into
Left Side Panel (P2). Insert 5 x Cam
Nuts (H4) into the holes of Rails (P9X2, P10, P11, P12).
Rotate the cam nuts so the arrows point towards the
incoming cam bolts. Attach Rails (P9X2, P10, P11, P12)
to the left frame, then tightening with the Phillips Head
Screwdriver.
(P9)
(P9)
(P12)
(P8)
(P8)

Step 8
You will need
Phillips Head
Screwdriver
Step 7
Insert 5 x Dowels (H2) into
Right Side Panel (P3). Insert 5 x Cam
Nuts (H4) into the holes of Rails (P9X2, P10, P11, P12).
Rotate the cam nuts so the arrows point towards the
incoming cam bolts. Attach Rails (P9X2, P10, P11, P12)
to the Right frame, then tightening with the Phillips Head
Screwdriver.
(P8) (P3)
(P2)
Ensure laminated
side of panel is
facing inwards.
fantasticfurniture.com.au Page 8
5 x Cam Nuts
(H4)
5 x Dowels
(H2)
(P3)
H2
H4 (P9)
(P9)
(P11)
(P10)
(P12)
Carefully turn the tallboy over to an
upright position. Slide Back Panels (P8)
into the grooves in Left Side Panel (P2)
and Right Side Panel (P3) .

You will need
Step 10
Step 9
You will need
Insert 8 xDowels (H2) into Left Side Panel (P2), Right Side Panel (P3) and Legs (P4, P5, P6, P7).
Secure 6 x Cam Bolts (H3) to Top Panel (P1) by tightening
with the Phillips Head Screwdriver.
Phillips Head
Screwdriver
H2
H2
(P2)
(P4)
(P5)
(P7)
(P6)
(P3)
(P1)
H3
H3
fantasticfurniture.com.au Page 9
8 x Dowels
(H2)
6 x Cam Bolts
(H3)

You will need
Step 12
Step 11
Secure 4 x Cam Bolts (H3) to Drawer Fronts (P13) by tightening
with the Phillips Head Screwdriver.
6 x Cam Nuts
(H4)
Phillips Head
Screwdriver
You will need (P1)
(P2)
(P3)
H4
Insert 6 x Cam Nuts (H4) into the holes of Side Panels (P2, P3) and Legs (P4, P5, P6, P7).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Panel (P1) into place, and then tighten the cam nuts.
(P4)
(P5)
(P7)
(P6)
4 x Small Cam
Bolts (H10)
Phillips Head
Screwdriver
H10
H10
(P13)
fantasticfurniture.com.au Page 10

You will need
Step 13
Phillips Head
Screwdriver
Step 14
(P15)
Insert 4 x Small Cam Nuts (H11) into Left & Right Drawer Sides ( P14 & P15),
attach to Drawer Fronts (P13) by tightening Cam Nuts with the Phillips Head Screwdriver.
4 x Small Cam
Nuts (H11)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P14)
(P13)
(P17)
Slide the Drawer Base (P17) into the grooves of Left & Right Drawer Sides (P14 & P15 ) as shown.
Ensure laminated
side of panel is
facing inwards.
H11
H11
(P13)
(P15)
(P14)
fantasticfurniture.com.au Page 11

Attach 2 x Handles (H13) to Drawer Front (P13) with 2 x Handle Bolts (H14).
Tighten Round Head Bolts using a Phillips head screwdriver.
You will need
Step 17
You will need
Step 15
Phillips Head
Screwdriver
Attach Drawer Back (P16 ) to
Left & Right Drawer Sides (P14 & P15)
with 4 x Long Screws (H12) by tightening
with the Phillips Head Screwdriver. Before
securing - Ensure the Bottom Panel lines up with the grooves the whole way around the drawer.
4 x Small
Screws (H5)
1 x DL
Runner (H8)
1 x DR
Runner (H9)
Phillips Head
Screwdriver
(P14) (P16)
(P15)
4 x Long
Screws (H12)
H12
H12
(P13)
Attach 1 x DL Runner (H8) to Left Drawer Side (P14) and 1 x DR Runner (H9) to Right Drawer
Side (P15) with 4 x Small Screws (H5) by tightening with the Phillips Head Screwdriver.
(P14)
(P15)
H8
H9
H5
H5
H5
H5
1 x Handles
(H13)
2 x Handle
Bolts (H14)
Phillips Head
Screwdriver
H13
H14
H14
fantasticfurniture.com.au Page 12
You will need
Step 16
(P13)
(P13)

You will need
Step 18
Secure 4 x Cam Bolts (H3) to Drawer Fronts (P13) by tightening
with the Phillips Head Screwdriver.
4 x Small Cam
Bolts (H10)
Phillips Head
Screwdriver
H10
H10
(P13)
You will need
Step 19
Phillips Head
Screwdriver
Step 20
Insert 4 x Small Cam Nuts (H11)
into Left & Right Drawer Sides
( P14 & P15), attach to Drawer
Fronts (P13) by tightening Cam
Nuts with the Phillips Head Screwdriver.
4 x Small Cam
Nuts (H11)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
H11
H11
(P13)
(P15)
(P14)
(P19)
Ensure felt liner
side of panel is
facing inwards.
(P15)
(P14)
(P13)
Slide the Felt Drawer Base (P19) with the felt liner into the grooves of Left & Right
Drawer Side (P14 & P15) as shown.
fantasticfurniture.com.au Page 13

Attach 2 x Handles (H13) to Drawer Fronts (P13) with 2 x Handle Bolts (H14).
Tighten Round Head Bolts using a Phillips head screwdriver.
You will need
Step 23
You will need
Step 21
Phillips Head
Screwdriver
Attach Drawer Back (P16 ) to
Left & Right Drawer Sides (P14 & P15)
with 4 x Long Screws (H12) by tightening
with the Phillips Head Screwdriver. Before
securing - Ensure the Bottom Panel lines up with the grooves the whole way around the drawer.
4 x Small
Screws (H5)
1 x DL
Runner (H8)
1 x DR
Runner (H9)
Phillips Head
Screwdriver
(P14) (P16)
(P15)
4 x Long
Screws (H12)
H12
H12
(P13)
Attach 1 x DL Runner (H8) to Left Drawer Side (P14) and 1 x DR Runner (H9) to Right Drawer
Side (P15) with 4 x Small Screws (H5) by tightening with the Phillips Head Screwdriver.
(P14)
(P15)
H8
H9
H5
H5
H5
H5
1 x Handles
(H13)
2 x Handle
Bolts (H14)
Phillips Head
Screwdriver
H13
H14
H14
fantasticfurniture.com.au Page 14
You will need
Step 22
(P13)
(P13)

You will need
Step 24
Secure 16 x Cam Bolts (H3) to Drawer
Fronts (P18x4) by tightening with the Phillips Head Screwdriver.
16 x Small Cam
Bolts (H10)
Phillips Head
Screwdriver
You will need
Step 25
Phillips Head
Screwdriver
Step 26
16 x Small Cam
Nuts (H11)
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Slide the Drawer Bases (P17x4) into the grooves of Left & Right Drawer Side
(P20x4 & P21x4) as shown.
(P18x4)
H10
H10
Insert 16 x Small Cam Nuts (H11) into Left & Right Drawer Sides (P20x4 & P21x4), attach to
Drawer Fronts (P18x4) by tightening Cam Nuts with the Phillips Head Screwdriver.
H11
H11
(P18x4)
(P21)
(P20)
(P18x4)
(P21)
(P17)
Ensure laminated
side of panel is
facing inwards.
(P20)
fantasticfurniture.com.au Page 15

You will need
Step 27
Phillips Head
Screwdriver
Attach Drawer Back (P22x4 ) to Left & Right Drawer Sides (P20x4 & P21x4) with 16 x Long
Screws (H12) by tightening with the Phillips Head Screwdriver. Before securing - Ensure the
Bottom Panel lines up with the grooves the whole way around the drawer.
16 x Small
Screws (H5)
4 x DL
Runner (H8)
4 x DR
Runner (H9)
Phillips Head
Screwdriver
16 x Long
Screws (H12)
(P20) (P22)
(P21)
H12
H12
(P18x4)
Attach 4 x DL Runner (H8) to Left Drawer Side (P20x4) and 4 x DR Runner (H9)
to Right Drawer Side ( P21x4) with 16 x Small Screws (H5) by tightening with the
Phillips Head Screwdriver.
(P20)
(P21)
H8
H9
H5
H5
H5
H5
fantasticfurniture.com.au Page 16
You will need
Step 28
(P18x4)

Insert the assembled drawer into the unit by gently guiding the drawer
runners into place.
Step 30 Put the drawer insert
with the felt liner in the
top drawer
fantasticfurniture.com.au
(P19)
(P13)
(P13)
(P18)
(P18)
(P18)
(P18)
Page 17
Attach 4 x Handles (H13) to Drawer Front (P18x4) with 8 x Handle Bolts (H14).
Tighten Round Head Bolts using a Phillips head screwdriver.
You will need
Step 29
4 x Handles
(H13)
8 x Handle
Bolts (H14)
Phillips Head
Screwdriver
H13
H14
H14
(P18)

Phillips Head
Screwdriver
1 x Safety
Strap (H17)
1 x Safety Strap
Screw (H18)
1 x Washer
(H19)
8 x Wedges
(H15)
8 x Wedge
Screws (H16)
You will need
Step 31
Screw
Wall
You will need
Step 32
Phillips Head
Screwdriver
1 x Washer
(H19)
Screw and Wall Plug
are not provided.
Please use appropriate
fixtures for your wall.
Move the unit to the final
position, and attach the safety
strap to the wall securely.Make
sure it is firmly attached and snug fit.
H19
Attach 1 x Safety Strap (H17) to
Top Panel (P1) with 1 x Safety Strap
Screw (H18) and 1 x Washer (H19) by
tightening with the Phillips Head Screwdriver.
Secure Back Panel (P8x2) in place with 8 x
Wedges (H15) using 8 x Wedge Screws (H16) by
tightening with the Phillips Head Screwdriver.
H17
H17
H19
H19
H18
H18
H15
H15
H16
H16
Seek advice from a qualified
trades person on how to
attach this safety strap to
your specific wall.
fantasticfurniture.com.au Page 18
(P1)
(P8)
(P8)

Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.
fantasticfurniture.com.au Page 19