fantastic furniture Rackham User manual

Version 1.0
Bed Queen Beige
Rackham
fantasticfurniture.com.au

Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Page 2

tsilkcehcylbmessA
Useful information
Read through the instructions carefully
.nigebuoyerofeb
stnenopmocehtfollatuoyaldnayfitnedI
before you begin assembly.
swercsnethgitylluftonod,detcurtsnisselnU
until the item is fully assembled.
.slootderiuqerehtllaevahuoyerusekaM
.detcurtsnisselnuslootrewopesureveN
fantasticfurniture.com.au Page 3
rostnenopmocruoyegamadnacyehT.detcurtsniyllacificepssselnuslootrewopesureveN!
hardware if used incorrectly.
.ecnatsissarehtrufrofertneCpleHetisbewruotisivesaelpstnenopmoc
rofetisbewrolebaleractcudorpehtkcehC.srenetsafllanethgit-erdnakcehcyllacidoireP!
product care instructions.
.rehtegotgnolebstrapehttahtniatrecerauoylitnueulgynaesureveN!
eblliwyehtmoorehtnidelbmessaebdluohssdebknubdnasebordrawsahcussmetiykluB!
used in as they may not fit through a door once assembled.
ottcudorpruoygnilbmessanehw)draobdracrotepracsahcus(
ecafrustfosaesusyawlA!
avoid scratching or damaging the surface of the product.
gnittegroerawdrahgnorwehtgnisueraylbmessagnirudedamsekatsimnommoctsomehT!
components back to front.
! Please see page 2 for any safety requirements or weight restrictions.

(P1)
(P2)
(P4)
(P5)
(P6)
(P8)
(P9)
(P9)
(P10)
(P10)
(P11)
(P7)
(P3)
fantasticfurniture.com.au Page 4
What you need
to assemble the product
DO NOT USE
Hardware pack
Cross Rail (P4)
2 X Side Support Legs (P5)
2 X Centre Rails (P1)
2 X Support Legs (P2)
Centre Support Leg (P3)
Head Board (P6)
Foot Board (P7)
2 X Sets of Wooden Slats (P11)
4 X Feet (P8)
2 X Side Boards A (P9)
2 X Side Boards B (P10)
Parts list
7 x Bolts
(H1)
Allen Key
(H2)

Step 1
Step 2 x2
Page 5
fantasticfurniture.com.au
You will need
Allen Key (H2)
2 x Bolts
(H1)
Attach 1 x support leg (P2) to 1 x centre
rail (P1) using 1 x bolt (H1) as shown,
tightening with allen key (H2). Repeat
this step for the other 1 x centre rail (P1)
and 1 x support leg (P2).
P2
P1
H1
P7
P8
P9
P10
P11
With assistance, lay the head
board (P6) down flat on its front. Open
the zipper and take out all the parts.

P1
P1
H1
P3
x2
P4
P5
P5
H1
Step 3
Step 4
fantasticfurniture.com.au Page 6
You will need
Allen Key (H2)
2 x Bolts
(H1)
With assistance, attach the
2 x centre rails (P1) to the
centre support leg (P3) using
2 x bolts (H1), tightening with
the allen key (H2).
With assistance, attach the cross rail (P4)
to the 2 x side support legs (P5) using
2 x bolts (H1), tightening with the allen key (H2).
You will need
Allen Key (H2)
2 x Bolts
(H1)

P1
P1
P3
P4
H1
Step 5
fantasticfurniture.com.au Page 7
Step 6
With assistance, attach cross
rail (P4) to centre support leg (P3)
using 1 x bolt (H1) tightening
with allen key ( H2).
Attach 2 x feet (P8)
to the head board (P6)
by hand as shown.
x2
You will need
Allen Key (H2)
1 x Bolt
(H1)
P6
P8
P8

P6
P1
Step 7
fantasticfurniture.com.au Page 8
Step 8
Attach 2 x feet (P8)
to the foot board (P7)
by hand as shown.
Loosen the bolts attached to
the centre of the head board (P6)
so they are protruding about 15mm.
With assistance, attach the centre
rail (P1) to the head board (P6) as
shown. Use the allen key (H2) to
tighten the bolts so the centre
rail (P1) is secure. Do not fully
tighten the bolts.
x2
P8
P8
P7
You will need
Allen Key (H2)

P7
P1
P6
P5
P9
Loosen the bolts attached to the left side of head board (P6)
and on 1 x side board A (P9) so they are protruding about 15mm.
With assistance, attach side board A (P9) to the head board (P6)
and to the side support leg (P5) as shown. Use the allen key (H2)
to tighten the bolts so that side
board A (P9) is secure. Do not
fully tighten the bolts.
Loosen the bolts attached to the
centre of the foot board (P7) so
they are protruding about 15mm.
With assistance, attach the centre
rail (P1) to the foot board (P7) as
shown. Use the allen key (H2) to
tighten the bolts so the centre
rail (P1) is secure. Do not fully
tighten the bolts.
Step 9
fantasticfurniture.com.au Page 9
Step 10
You will need
Allen Key (H2)
You will need
Allen Key (H2)

P5
P7
P10
P5
P6
P10
Step 11
fantasticfurniture.com.au Page 10
Step 12
You will need
Allen Key (H2)
Loosen the bolts attached to the right side of head board (P6) and
on 1 x side board B (P10) so they are protruding about 15mm. With
assistance, attach side board B (P10) to the head board (P6) and to
the side support leg (P5) as shown. Use the allen key (H2) to tighten
the bolts so that side board B (P10) is secure. Do not fully tighten
the bolts.
You will need
Allen Key (H2)
Loosen the bolts attached to the left side of foot board (P7) and on 1 x side board
B (P10) so they are protruding about 15mm. With assistance, attach side board B (P10)
to the foot board (P7) and to the side support leg (P5) as shown. Use the allen key (H2)
to tighten the bolts so that side board B (P10) is secure. Do not fully tighten the bolts.