fantastic furniture Pasadena User manual

fantasticfurniture.com.au
Version 1.0
Pasadena
Bookcase 2 Door Cabinet Oak

Secure it!
Wall attachment guide
For plasterboard
(with available wood stud)
Securing method:
Screw inserted directly into
stud.
Reduce the risk of furniture
tip-over accidents
For plasterboard
(without available wood stud)
Securing method:
Self drilling plasterboard
anchor.
For masonry wall
Securing method:
Solid wall: Plug with screw
Hollow wall: Spring toggle
fantasticfurniture.com.aufantasticfurniture.com.au
Please seek professional advice if you are in doubt of what fixing device to use.
30
WEIGHT LIMIT: KGS PER SHELF
WARNING: ENSURE THE WALL STRAP IS ATTACHED TO
AVOID SERIOUS INJURY OR DEATH.
To avoid any serious or fatal injury, a wall strap has been provided with this
product to prevent toppling. We strongly recommend that this product is
permanently fixed to the wall or other suitable surface. Fixing devices are not
included since different surface materials require different attachments.
Please seek professional advice if you are in doubt of what fixing device to use.
To reduce the risk of furniture tipover:
•Do not allow children to stand, climb or hang on furniture. It may topple
and cause serious injury or death.
•Do not place toys or other child appealing items on top of this furniture,
and place heaviest items towards the bottom of the furniture.
• Do not open more than one drawer at the time.
•Anchoring this product to a wall or other suitable surface is recommended.
Check anchors regularly.
•Avoid putting a TV on this product.
Page 2

fantasticfurniture.com.au
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Page 3

fantasticfurniture.com.au P
Read through the instructions
carefully before you begin.
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screwsuntil the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a so t surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
components please visit our website Help Centre for further assistance.
Assembly Checklist
!Please see page 2for any safety requirements or weight restrictions.
Useful information
Page 4

Page 5
fantasticfurniture.com.au
What You Need
to assemble the product
Box 1:
Other tools you need
Phillips Head Screwdriver
2 x Top Side Frames (P1)
2 x Lower Side Frames (P2)
Top Panel (P3)
3 x Shelf Panels (P4)
4 x Steel Bars (P5)
2 x Back Support (P6)
2 x Back Panels (P11)
Shelf Panel (P12)
Left Side Panel (P9)
Right Side Panel (P10)
(P1)
(P5)
(P15)
(P2)
(P2)
(P3)
(P4)
(P7)
(P6)
(P6)
(P8)
(P9)
(P10)
(P12)
(P16)
(P13) (P14)
(P11) (P11)
10 x Screws
(H1) 13 x Screws
(H2) 20 x Screws
(H3) (H4) (H5) (H6)
16 x Cam Nuts 16 x Cam Bolts (H7)
(H8)
22 x Dowels
(H9) (H11)
(H10)
2 x Metal Handles 4 x Screws
4 x Hinges
4 x Shelf Supports (H13)
(H12) (H14)
1 x Washer
(H15) (H16) (H17)
1 x Allen Key
8 x Screws 16 x Screws 1 x Nut
2 x Pads
Top Side Frame
(P1)
Top Side Frame
Lower Side Frame
Lower Side Frame
Top Panel
Shelf Panel
(P4)
Shelf Panel
(P4)
Shelf Panel
Cabinet Top Panel
Cabinet Bottom Panel
Left Door
Right Door
Steel Bar
Steel Bar
Shelf Panel
Back Panel Back Panel
Left Side Panel
Right Side Panel
Steel Bar
Back Support
Cabinet Top Panel (P7)
Cabinet Bottom Panel (P8)
Left Door (P13)
Right Door (P14)
Steel Bar (P15)
Steel Bar (P16)
Box 1:
1 x Wrench

Page 6
fantasticfurniture.com.au
Step 1
Step 2
You will need
You will need
(H5)
(H6)
4 x Cam Bolts
(H4)
Phillips Head
(H5)
(H5)
P9
P11
(H4)
(H6)
(H4)
(H6)
(H6)
(H4)
P9
P11
(H5)
(H5)
P10
(H5)
4 x Cam Nuts 4 x Dowels
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
P10
(H6)
(H6)
(H4)
(H4)
P11
Phillips Head
Insert 4 x Cam Bolts (H5) to Left Side Panel (P9) and Right Side Panel (P10), by tightening
with a Phillips Head Screwdriver.
Insert 4 x Dowels (H6) into Left Side Panel (P9) and Right Side Panel (P10).
Insert 4 x Cam Nuts (H4) into 2 x Back Panels (P11).
Rotate the nuts so the arrows point the incoming bolts.
Attach 2 x Back Panels (P11) to Side Panels (P9 & P10), by tightening all Cam Nuts
with the Phillips Head Screwdriver.
Screwdriver
Screwdriver

fantasticfurniture.com.au Page 7
You will need
Step 4
You will need
Step 3
2 x Dowels
(H6)
P9
P10 P11 P11
(H6)
(H6)
(H5)
12 x Cam Bolts
(H5)
(H5)
(H5)
(H5)
P8
(H5)
(H5)
(H5)
(H5) (H5)
(H5)
P7
Attach the 2 x Back Panels (P11) together with 2 x Dowels (H6)
and slot them together.
Phillips Head
Attach 12 x Cam Bolts (H5) to the Cabinet Top Panel (P7) and Cabinet Bottom
Panel (P8), by tightening with a Phillips Head Screwdriver.
Screwdriver

by tightening with the Allen Key (H17).
Page 8
fantasticfurniture.com.au
Step 5
Step 6
You will need
(H3)
4 x Screws
(H4)
(H6)
Allen Key
P9
P10
P8
P11 P11
(H3)
(H3)
(H3)
(H3)
(H6)
(H6)
(H6)(H6)
(H6)
(H6)
(H4)
(H4)
(H4)
P8
P9
(H4)
(H6)
(H3)
P11
P11
P11
P10
P9
P7
P15
P15
P10
(H4)
(H6)
P7
(H4)
(H4)
(H4)
(H4)
You will need
(H6)
(H4)
4 x Cam Nuts
8 x Dowels
Phillips Head
(H6)
8 x Cam Nuts 8 x Dowels
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
This is how a cam nut works........
The head of the
cam bolt goes into
the open mouth of
the cam nut. You
then turn the cam
nut so it tightens
over the bolt.
(H6)
(H6) (H6)
(H6) (H6)
(H6)
(H6)
Insert 8 x Dowels (H6) into Panels (P9, P10 & P11).
Insert 4 x Cam Nuts (H4) into 2 x Back Panels (P11).
Attach Cabinet Bottom Panel (P8) to Panels (P9, P10 & P11),
a Phillips Head Screwdriver.
Secure the Cabinet Bottom Panel (P8) with 4 x Screws (H3)
Slot in the Steel Bar (P15) into the
grooves. Insert 8 x Cam Nuts (H4)
P10 & P11). Rotate the nuts so the arrows
Attach Cabinet Top Panel (P7) to Panels (P9, P10 & P11), by tightening the Cam Nuts with
a Phillips Head Screwdriver.
by tightening the Cam Nuts with
(H17)
Rotate the nuts so the arrows point the incoming bolts.
and 8 x Dowels (H6) into Panels (P9,
point the incoming bolts.
Screwdriver

Page 9
fantasticfurniture.com.au
Step 7
You will need
(H11)
8 x Screws
(H11)
P3
(P4) x 3
(H11)
(H11)
(H11)
P5
P5x3
Phillips Head
(H11)
P5
Step 8
x 2
P1
P2
P1 P2 P1
P2
(H2)
(H2)
(H2)
You will need
(H2)
Allen Key
8 x Screws (H17)
(H17)
Attach 4 x Steel Bars (P5) to the Top Panel (P3) and 3 x Shelf Panels (P4) with 8 x Screws (H11),
tightening with a Phillips Head Screwdriver.
Attach the Top Side Frame (P1) to the Lower Side Frame (P2) with 4 x Screws (H2),
tightening with the Allen Key (H17). Repeat process for remaining frame.
Screwdriver
Countersink face up

Page 10
fantasticfurniture.com.au
You will need
(H1) (H3)
P1
(H1)
(H3)
P3
P5
P2
(H1)
P1 P4
P5
(H1)
P2
P16
P8
P4
P5
P4
P5
P4
P5
5 x Screws 8 x Screws
Allen Key
(H17)
(H3)
(H3)
(H3)
(H3)
(H1)
(H1)
(H1)
(H1) (H1)
(H3)
(H3)
(H3)
You will need
P8
P7
P16
(H17)
Step 9
Step 10
P3
P5
P4
P4
P7
P8
P5
(H1)
(H1)
(H3)
P16
P16
P8
P1
P2
P2
(H1) (H3)
5 x Screws 8 x Screws
Allen Key
(H17)
(H3)
(H1)
P4 P5
P5
(H1)
(H1)
(H1)
(H3)
(H3)
P1
(H1)
P5
Attach assembled side frame (P1 & P2) to Panels (P3, P4, P7 & P8) with
8 x Screws (H3), by tightening with Allen Key (H17). Secure the side frame
(P1 & P2) to the Steel Bars (P5 & P16) with 5 x Screws (H1), by tightening
with Allen Key (H17).
Attach assembled side frame (P1 & P2) to Panels (P3, P4, P7 & P8) with
8 x Screws (H3), by tightening with Allen Key (H17). Secure the side frame
(P1 & P2) to the Steel Bars (P5 & P16) with 5 x Screws (H1), by tightening
with Allen Key (H17).