FireplaceXtrordinair 864 TRV (Top/Rear Vent) User manual

564 Arched Face
Classic Black 95400402
French Country Black 95400408
Artisan Charcoal 95400418
Artisan Patina Bronze 95400417
Metalsmith 95400440
864 Arched Face
Classic Black: 99300497
Artisan Charcoal: 99300498
French Country Black: 95800616
Artisan Patina Bronze 95800621
Metalsmith 95800746
Page 1 of 5 17602069 - 10/16/20 © Travis Industries, Inc.
564 Faces
Compatibility:
• 564 SS GS2 & GSR2
• 564 25K
• 564 HO
• 564 35K
Packing List:
• Face
• (2) 564 SS Top Brackets (w screws)
• (2) 10-24 1-1/2" Screws
• (4) 8-32 Nuts
564 GAS FIREPLACES ONLY:
The FPX Face Upgrade Kit (sku# 98500683) must be
installed prior to installing the facing material and face.
564 SS GAS FIREPLACES ONLY:
The center deflectors must be in place when using this face to
prevent the facing above the fireplace from becoming too hot.
If this face is replacing a Lopi Grill (96200801), make sure to
replace the center deflectors.
NOTE FOR THICK FACING (BRICK,
ROCK, ETC.):
The Fireplace Xtrodinair 564 Set-Up
Face is recommended for masonry
installation (98500674). The set-up face
helps locate and support the masonry
during installation.
SIDE OF FIREPLACE
1”
5/16” TO 1”
NOTE:
This face has an adjustable bracket that allows for
different facing depths to be tucked under the face.












36”
61”Radius
29”
2-3/4”

564 Arched Face
Classic Black 95400402
French Country Black 95400408
Artisan Charcoal 95400418
Artisan Patina Bronze 95400417
Metalsmith 95400440
864 Arched Face
Classic Black: 99300497
Artisan Charcoal: 99300498
French Country Black: 95800616
Artisan Patina Bronze 95800621
Metalsmith 95800746
Page 2 of 5 17602069 - 10/16/20 © Travis Industries, Inc.
864 Faces
Compatibility:
• 864 TRV 31K
• 864 TV 40K
• 864 ST
• 864 HO
Packing List:
• Face
• (2) Face Mounting Brackets (w screws)
• (2) 10-24 1-1/2" Screws
• (4) 8-32 Nuts
The FPX Face Upgrade Kit (sku# 98500686) must be
installed prior to installing the facing material and face.
41”
35-3/4"
5"
Radius = 45-3/4”
NOTE FOR THICK FACING (BRICK, ROCK, ETC.):
The Fireplace Xtrodinair 864 Set-Up Face is recommended for
masonry installation (98500688). The set-up face helps locate
and support the masonry during installation.
SIDE OF FIREPLACE
1”
5/16” TO 1”
NOTE:
This face has an adjustable bracket that allows for
different facing depths to be tucked under the face.

564 Arched Face
Classic Black 95400402
French Country Black 95400408
Artisan Charcoal 95400418
Artisan Patina Bronze 95400417
Metalsmith 95400440
864 Arched Face
Classic Black: 99300497
Artisan Charcoal: 99300498
French Country Black: 95800616
Artisan Patina Bronze 95800621
Metalsmith 95800746
Page 3 of 5 17602069 - 10/16/20 © Travis Industries, Inc.
Hand-Rubbed Patina Finishes
The optional patina finish is hand applied by a skilled artisan to permanently alter the metal colors and texture of the face.
Each face is individually hand-polished and fired in an oven which imparts unique color subtleties with no two finishes alike.
The patina finish on your face is a “living” color and will age and antique over time. Enjoy the timeless, rich luster of your
beautiful new face.
Installation
1 Remove the glass barrier screen (see owner's manual for details). Secure the arch cover to the barrier
following the directions below (arch cover is shipped with the fireplace). Replace the glass barrier.
Lift the barrier up, pivot the top forward,
and remove from the fireplace.
Arch Cover
Bend the tabs over to
secure the arch cover to
the barrier.

564 Arched Face
Classic Black 95400402
French Country Black 95400408
Artisan Charcoal 95400418
Artisan Patina Bronze 95400417
Metalsmith 95400440
864 Arched Face
Classic Black: 99300497
Artisan Charcoal: 99300498
French Country Black: 95800616
Artisan Patina Bronze 95800621
Metalsmith 95800746
Page 4 of 5 17602069 - 10/16/20 © Travis Industries, Inc.
Installation (continued)
2 The facing and hearth (if applicable) must be installed prior to attaching the face. See the installation
manual for complete details.
Raised
Fireplaces





























































Note how the tile is 1”
(maximum) above the
base of the fireplace.






















































Maximum 1`” Hearth
Floor-Level
Fireplaces






564 Arched Face
Classic Black 95400402
French Country Black 95400408
Artisan Charcoal 95400418
Artisan Patina Bronze 95400417
Metalsmith 95400440
864 Arched Face
Classic Black: 99300497
Artisan Charcoal: 99300498
French Country Black: 95800616
Artisan Patina Bronze 95800621
Metalsmith 95800746
Page 5 of 5 17602069 - 10/16/20 © Travis Industries, Inc.
Installation (continued)
3 Install the face following the directions below.



























































Attach the upper brackets
to the face with the
included nuts.
Slide the face into place. The
tabs on the upper brackets insert
into the slots on the fireplace
brackets, holding the face in place
while the screws are tightened.
a
b
cThe face is secured to the fireplace
with four screws. Two of the screws
are fastened to the upper brackets
with press nuts. The lower screws
are included with the face.