FireplaceXtrordinair 95400402 User manual

564 SS / 564 E Arched Face
Classic Black 95400402 Nickel 95400405
French Country Black 95400408
Page 1 of 6 17601470 - 9/14/11 © Travis Industries, Inc.
Compatibility:
• 564 SS Fireplace
• 564 Electric Fireplace
Packing List:
• Face • 564 E Top and Bottom Brackets
• (2) 564 SS Top Brackets (w screws) • 564 E Upper Heat Shield
• 564 SS Glass Frame Cover • 564 E Cove Cover
• (2) 10-24 1-1/2" Screws (564 SS only) • (6) 8-32 Nuts
564 SS GAS FIREPLACES ONLY:
The FPX Face Upgrade Kit (98500683) must be installed
prior to installing the facing material and face.
564 SS GAS FIREPLACES ONLY:
The center deflectors must be in place when using this face to
prevent the facing above the fireplace from becoming too hot.
If this face is replacing a Lopi Grill (96200801), make sure to
replace the center deflectors.
Care and Handling of Plated Surfaces
Use denatured alcohol and a soft cloth to clean gold or nickel surfaces. Marks left
on the surface may damage the face.
Denatured
Alcohol
Soft Cloth
Installation Details – 564 SS
NOTE FOR THICK FACING (BRICK,
ROCK, ETC.):
The Fireplace Xtrodinair 564 Set-Up
Face is recommended for masonry
installation (98500674). The set-up face
helps locate and support the masonry
during installation.
SIDE OF FIREPLACE
1”
5/16” TO 1”
NOTE:
This face has an adjustable bracket that allows for
different facing depths to be tucked under the face.












36”
61”Radius
29”
2-3/4”

564 SS / 564 E Arched Face
Classic Black 95400402 Nickel 95400405
French Country Black 95400408
Page 2 of 6 17601470 - 9/14/11 © Travis Industries, Inc.
Installation – 564 SS
1 Remove the glass frame (see the owner's manual for details). Install the glass frame cover following the
directions below. Replace the glass frame.
Push these tabs inwards
to lock the cover in place.
Place the cover over the top of the door frame.

564 SS / 564 E Arched Face
Classic Black 95400402 Nickel 95400405
French Country Black 95400408
Page 3 of 6 17601470 - 9/14/11 © Travis Industries, Inc.
Installation – 564 SS (continued)
2 The facing and hearth (if applicable) must be installed prior to attaching the face. See the installation
manual for complete details.
Raised
Fireplaces





























































Note how the tile is 1”
(maximum) above the
base of the fireplace.






















































Maximum 1`” Hearth
Floor-Level
Fireplaces






564 SS / 564 E Arched Face
Classic Black 95400402 Nickel 95400405
French Country Black 95400408
Page 4 of 6 17601470 - 9/14/11 © Travis Industries, Inc.
Installation – 564 SS (continued)
3 Install the face following the directions below.



























































Attach the upper brackets
to the face with the
included nuts.
Slide the face into place. The
tabs on the upper brackets insert
into the slots on the fireplace
brackets, holding the face in place
while the screws are tightened.
a
b
cThe face is secured to the fireplace
with four screws. Two of the screws
are fastened to the upper brackets
with press nuts. The lower screws
are included with the face.
Plated Surfaces
Use denatured alcohol and a soft cloth to clean plated surfaces. Marks
left on the surface may damage the face.
Denatured
Alcohol
Soft Cloth

564 SS / 564 E Arched Face
Classic Black 95400402 Nickel 95400405
French Country Black 95400408
Page 5 of 6 17601470 - 9/14/11 © Travis Industries, Inc.
Installation – 564 Electric
1 Install the upper heat shield onto the 564 E fireplace.
Remove and discard the
stock upper heat shield.
























































Attach the upper heat shield
included with this kit (note
position of the shield).

564 SS / 564 E Arched Face
Classic Black 95400402 Nickel 95400405
French Country Black 95400408
Page 6 of 6 17601470 - 9/14/11 © Travis Industries, Inc.
2 Place the face, face down, on a soft, non-scratching surface. Install the 564 Electric mounting brackets onto
the back of the face.
c
b
aRemove and
discard the
hinge assembly
from the face.
d
Attach the lower 564 E bracket. Use
the nuts removed earlier and one of the
nuts included with this kit.
Attach the upper 564 E
bracket. Use the nuts
included with this kit.
Repeat steps “a” through
“c” for the opposite side.
eBefore installing the face
verify the lower grill is
centered. Loosen the nuts
and adjust if necessary.
3 Pull the electric fireplace out of the mantel (or built-in location). Attach the cove covers and face following the
directions below. Slide the fireplace back into place to complete the installation.
Tilt the face back slightly and
insert the bottom hooks into
the slots on the fireplace.


























Lift the face up slightly, tilt
it forward and insert the
top hooks until the face
locks in place.
c
b
Hang the 564 E cove
cover over the glass -
this keeps light from
exiting the grill opening
along the top of the face.
a