FireplaceXtrordinair 564 FPX User manual

564 FPX Arched Face Upgrade Kit
sku# - 98500683
Page 1 of 2 17601469 10/16/20 © Travis Industries, Inc.
Compatibility:
• 564 Fireplaces when installing FPX Arched Faces
Packing List:
• Tiling guide (2 pieces - left and right)
• (4) Mounting Brackets (attaches to the fireplace)
• (4) Screws
This upgrade kit (98500683) must be installed prior to installing the facing material or face.
Installation
1 Attach the brackets to the fireplace following the directions below.
Repeat these steps for the opposite side.
Upper
Bracket
Lower
Bracket
Upper
Left
Lower
Left
Upper
Right
Lower
Right
Bracket
Identification
Remove the nuts and bushings above and
below the firebox. Place the brackets into
position then replace the bushings and nuts
to secure the brackets in place.

564 FPX Arched Face Upgrade Kit
sku# - 98500683
Page 2 of 2 17601469 10/16/20 © Travis Industries, Inc.
2 Attach the tiling guide following the directions below.
Slide both tiling guides into place.
NOTE: the tiling guide has slots that
slide between the brackets and the
fireplace.
Loosen the nuts on the upper
brackets three turns (both sides).
Re-tighten the nuts on the brackets
(typically you only need to tighten the
lower nuts and hand-tighten upper
nuts).
Use the four included screws to secure
the tiling guides to the fireplace frame.
a
b
c
d